My Quote Request
2530-00-294-6773
20 Products
08-4090-030-030
LINING MATERIAL,FRICTION
NSN, MFG P/N
2530002946773
NSN
2530-00-294-6773
08-4090-030-030
LINING MATERIAL,FRICTION
NSN, MFG P/N
2530002946773
NSN
2530-00-294-6773
MFG
DANA CORP DBA SPICER OFF HIGHWAY PRODUCTS DIVISION
Description
APPLICATION TYPE: DRY
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FLEXIBLE FRICTION LINING
III SUPPLEMENTARY FEATURES: THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURENT APPROVED SOURCE, CAGE 58536, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
LINING STYLE: 16 BULK LINING
MANUFACTURERS CODE: 58536
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: A-A-52522
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 1/4 SIZE
SPEC/STD CONTROLLING DATA:
SURFACE CONDITION AND LOCATION: ONE SIDE GROUND
THICKNESS: 0.250 INCHES NOMINAL
WIDTH: 3.000 INCHES NOMINAL
Related Searches:
226059
CHAMBER,AIR BRAKE
NSN, MFG P/N
2530002946709
NSN
2530-00-294-6709
MFG
BENDIX COMMERCIAL VEHICLE SYSTEMS LLC
Description
DESIGN CONTROL REFERENCE: 226059
FURNISHED ITEMS AND QUANTITY: BOOT
MANUFACTURERS CODE: 06853
MANUFACTURERS CODE: 81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: GGGT70
PUSH ROD LENGTH: 12.000 INCHES
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: SHANK O/A:0.750 IN.;WIDTH O/A:1.500 IN.;DIA O/A:6.938 IN.;FORK WIDTH:0.562 IN.;DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END:2.344 IN.;FORK ARM THICKNESS:0.312 IN.;FORK DEPTH:1.188 IN.;DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END:0.343
STROKE LENGTH: 2.250 INCHES
THE MANUFACTURERS DATA:
~1: IN.;MTG CONFIGURATION:EQUALLY SPACED ON 4.750 IN.DIA BOLT CIRCLE;MTD FACILITY SIZE:0.750 IN.;MTG METHOD:STUD;ANGLE FROM BOTTOM OF VERTICAL CENTER LINE:90.0 DEG;CLEVIS STYLE DESIGNATOR:1;ROD END DISTANCE O/A:8.125 IN.;CLAMP RING TYPE AIR BRAKE
~2: CHAMBER,CLEVIS SHANK 0.312 IN.-18 FEMALE THD,BREATHER STUD USED FOR TOP MTG
Related Searches:
GGGT70
CHAMBER,AIR BRAKE
NSN, MFG P/N
2530002946709
NSN
2530-00-294-6709
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DESIGN CONTROL REFERENCE: 226059
FURNISHED ITEMS AND QUANTITY: BOOT
MANUFACTURERS CODE: 06853
MANUFACTURERS CODE: 81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: GGGT70
PUSH ROD LENGTH: 12.000 INCHES
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: SHANK O/A:0.750 IN.;WIDTH O/A:1.500 IN.;DIA O/A:6.938 IN.;FORK WIDTH:0.562 IN.;DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END:2.344 IN.;FORK ARM THICKNESS:0.312 IN.;FORK DEPTH:1.188 IN.;DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END:0.343
STROKE LENGTH: 2.250 INCHES
THE MANUFACTURERS DATA:
~1: IN.;MTG CONFIGURATION:EQUALLY SPACED ON 4.750 IN.DIA BOLT CIRCLE;MTD FACILITY SIZE:0.750 IN.;MTG METHOD:STUD;ANGLE FROM BOTTOM OF VERTICAL CENTER LINE:90.0 DEG;CLEVIS STYLE DESIGNATOR:1;ROD END DISTANCE O/A:8.125 IN.;CLAMP RING TYPE AIR BRAKE
~2: CHAMBER,CLEVIS SHANK 0.312 IN.-18 FEMALE THD,BREATHER STUD USED FOR TOP MTG
Related Searches:
34RC165P2
AXLE ASSEMBLY,AUTOMOTIVE,DRIVING
NSN, MFG P/N
2530002946710
NSN
2530-00-294-6710
34RC165P2
AXLE ASSEMBLY,AUTOMOTIVE,DRIVING
NSN, MFG P/N
2530002946710
NSN
2530-00-294-6710
MFG
MACK TRUCKS INC PARTS OPN
Description
AXLE TYPE: FULL-FLOATING
BRAKE TYPE: AIR
DESIGN CONTROL REFERENCE: 34RC165P2
DESIGN TYPE: REAR REAR
DISTANCE BETWEEN SPRING SEAT CENTERS: 38.000 INCHES NOMINAL
FURNISHED AXLE COMPONENTS: BRAKE CHAMBER AND BRAKE DRUM AND HUB
MANUFACTURERS CODE: 76040
SPECIAL FEATURES: SPEED ADJUSTMENTS-SGL SPEED;BRAKING FACILITY-INCL.;GEAR DRIVE TYPE-SPIRAL BEVEL;GEAR RATIO 9.02 TO 1;PROP SHAFT FLANGE-NOT INCL.
THE MANUFACTURERS DATA:
TRACK WIDTH: 81.250 INCHES
Related Searches:
7974622
AXLE ASSEMBLY,AUTOMOTIVE,DRIVING
NSN, MFG P/N
2530002946710
NSN
2530-00-294-6710
7974622
AXLE ASSEMBLY,AUTOMOTIVE,DRIVING
NSN, MFG P/N
2530002946710
NSN
2530-00-294-6710
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
AXLE TYPE: FULL-FLOATING
BRAKE TYPE: AIR
DESIGN CONTROL REFERENCE: 34RC165P2
DESIGN TYPE: REAR REAR
DISTANCE BETWEEN SPRING SEAT CENTERS: 38.000 INCHES NOMINAL
FURNISHED AXLE COMPONENTS: BRAKE CHAMBER AND BRAKE DRUM AND HUB
MANUFACTURERS CODE: 76040
SPECIAL FEATURES: SPEED ADJUSTMENTS-SGL SPEED;BRAKING FACILITY-INCL.;GEAR DRIVE TYPE-SPIRAL BEVEL;GEAR RATIO 9.02 TO 1;PROP SHAFT FLANGE-NOT INCL.
THE MANUFACTURERS DATA:
TRACK WIDTH: 81.250 INCHES
Related Searches:
010-375379
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
010-375379
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
CHIEF OF ENGINEERS DEPT OF ARMY
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
121252
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
121252
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
KOMATSU AMERICAN INTL CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
375397
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
375397
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-SOUTH BEND BENDIX DR
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
375397
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
375397
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
BENDIX CORP THE BRAKE AND STEERING DIV
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
47488
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
TIFFIN PARTS L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
NAVISTAR INTL CORP TRUCK BR OHIO PLANT
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
KOMATSU AMERICAN INTL CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
NAVISTAR INTL CORP
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
80341R1
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
KOMATSU AMERICA CORP.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
864862
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
864862
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
CLARK EQUIPMENT CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
864862
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
864862
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
DANA CORP DBA SPICER OFF HIGHWAY PRODUCTS DIVISION
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
PB1654
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
PB1654
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
KOMATSU AMERICAN INTL CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
PB1654
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
PB1654
BLEEDER VALVE,HYDRAULIC SYSTEM
NSN, MFG P/N
2530002946747
NSN
2530-00-294-6747
MFG
KOMATSU AMERICA CORP.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; ZINC-PLATED FINISH; DIM. DATA,1.150 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,0.760 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOLE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE
~1: CONNECTOR,0.303 IN. MIN 0.313 IN. MAX LARGEST DIA OF HOSE CONNECTOR,0.213 IN. MIN 0.223 IN. MAX SMALLET DIA OF HOSE CONNECTOR,0.265 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.296 IN. MIN 0.306 IN. MAX LARGEST OD OF TAPER,0.104 IN. LG TAPER,0.260 IN.
~2: LG,EXCL THD PORTION,0.197 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,3/8-24,UNF OR NF,RH THD CLASS 2A THD OR CLASS 2 FIT,0.410 IN. MIN 0.420 IN. MAX MIN LG FULL THD; DRAIN HOLE DATA,1/8 IN. DIA,1 IN. LG
Related Searches:
08-4090-030-030
LINING MATERIAL,FRICTION
NSN, MFG P/N
2530002946773
NSN
2530-00-294-6773
08-4090-030-030
LINING MATERIAL,FRICTION
NSN, MFG P/N
2530002946773
NSN
2530-00-294-6773
MFG
CLARK EQUIPMENT CO
Description
APPLICATION TYPE: DRY
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FLEXIBLE FRICTION LINING
III SUPPLEMENTARY FEATURES: THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURENT APPROVED SOURCE, CAGE 58536, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
LINING STYLE: 16 BULK LINING
MANUFACTURERS CODE: 58536
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: A-A-52522
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 1/4 SIZE
SPEC/STD CONTROLLING DATA:
SURFACE CONDITION AND LOCATION: ONE SIDE GROUND
THICKNESS: 0.250 INCHES NOMINAL
WIDTH: 3.000 INCHES NOMINAL
Related Searches:
08-4090-030-030
LINING MATERIAL,FRICTION
NSN, MFG P/N
2530002946773
NSN
2530-00-294-6773
08-4090-030-030
LINING MATERIAL,FRICTION
NSN, MFG P/N
2530002946773
NSN
2530-00-294-6773
MFG
CHIEF OF ENGINEERS DEPT OF ARMY
Description
APPLICATION TYPE: DRY
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FLEXIBLE FRICTION LINING
III SUPPLEMENTARY FEATURES: THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURENT APPROVED SOURCE, CAGE 58536, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
LINING STYLE: 16 BULK LINING
MANUFACTURERS CODE: 58536
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: A-A-52522
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 1/4 SIZE
SPEC/STD CONTROLLING DATA:
SURFACE CONDITION AND LOCATION: ONE SIDE GROUND
THICKNESS: 0.250 INCHES NOMINAL
WIDTH: 3.000 INCHES NOMINAL