My Quote Request
2530-00-450-9280
20 Products
2R0066
BRAKE,SINGLE DISK
NSN, MFG P/N
2530004509280
NSN
2530-00-450-9280
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
BRAKE,SINGLE DISK
Related Searches:
A123005
BOOT,DUST AND MOISTURE SEAL
NSN, MFG P/N
2530004509257
NSN
2530-00-450-9257
MFG
TRIUMPH ENGINEERED SOLUTIONS INC . DBA TRIUMPH FABRICATIONS - PHOENIX DIV TRIUMPH FABRICATIONS - PHOENIX
Description
BASE OUTSIDE DIAMETER: 7.000 INCHES NOMINAL
MATERIAL: ANY ACCEPTABLE BODY
MATERIAL THICKNESS: 0.062 INCHES NOMINAL
OPENING INSIDE DIAMETER: ANY ACCEPTABLE
OVERALL HEIGHT: 12.062 INCHES NOMINAL
STYLE DESIGNATOR: A18 THRU-HOLE
Related Searches:
A123005
BOOT,DUST AND MOISTURE SEAL
NSN, MFG P/N
2530004509257
NSN
2530-00-450-9257
MFG
TRIUMPH ENGINEERED SOLUTIONS INC . DBA TRIUMPH FABRICATIONS - PHOENIX DIV TRIUMPH FABRICATIONS - PHOENIX
Description
BASE OUTSIDE DIAMETER: 7.000 INCHES NOMINAL
MATERIAL: ANY ACCEPTABLE BODY
MATERIAL THICKNESS: 0.062 INCHES NOMINAL
OPENING INSIDE DIAMETER: ANY ACCEPTABLE
OVERALL HEIGHT: 12.062 INCHES NOMINAL
STYLE DESIGNATOR: A18 THRU-HOLE
Related Searches:
5690724
ARM,STEERING GEAR
NSN, MFG P/N
2530004509262
NSN
2530-00-450-9262
MFG
GENERAL MOTORS CORP SAGINAW DIV
Description
BORE LENGTH: 0.810 INCHES NOMINAL
BORE SMALLEST DIAMETER: 0.591 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE: 7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM
COUNTERBORE FEATURE: NOT INCLUDED
DESIGN TYPE: OFFSET
DRAG LINK END CHARACTERISTIC: W/BALL STUD BORE
SECTOR SHAFT MOUNTING END OVERALL THICKNESS: 1.310 INCHES NOMINAL
SECTOR SHAFT MOUNTING END OVERALL WIDTH: 2.750 INCHES NOMINAL
SECTOR SHAFT MOUNTING END SERRATED BORE: INCLUDED
SERRATION INCLUDED ANGLE IN DEG: 80.0
SMALL END MAJOR DIAMETER: 1.189 INCHES NOMINAL
SMALL END TEETH DEPTH: ANY ACCEPTABLE
TAPER: 0.750 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.880 INCHES NOMINAL
TEETH CUT ANGLE IN DEG: 1 DEGREE,37 MINUTES
TEETH QUANTITY: 32
Related Searches:
5690724
ARM,STEERING GEAR
NSN, MFG P/N
2530004509262
NSN
2530-00-450-9262
MFG
GENERAL MOTORS CORP SAGINAW DIV
Description
BORE LENGTH: 0.810 INCHES NOMINAL
BORE SMALLEST DIAMETER: 0.591 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE: 7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM
COUNTERBORE FEATURE: NOT INCLUDED
DESIGN TYPE: OFFSET
DRAG LINK END CHARACTERISTIC: W/BALL STUD BORE
SECTOR SHAFT MOUNTING END OVERALL THICKNESS: 1.310 INCHES NOMINAL
SECTOR SHAFT MOUNTING END OVERALL WIDTH: 2.750 INCHES NOMINAL
SECTOR SHAFT MOUNTING END SERRATED BORE: INCLUDED
SERRATION INCLUDED ANGLE IN DEG: 80.0
SMALL END MAJOR DIAMETER: 1.189 INCHES NOMINAL
SMALL END TEETH DEPTH: ANY ACCEPTABLE
TAPER: 0.750 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.880 INCHES NOMINAL
TEETH CUT ANGLE IN DEG: 1 DEGREE,37 MINUTES
TEETH QUANTITY: 32
Related Searches:
5690724
ARM,STEERING GEAR
NSN, MFG P/N
2530004509262
NSN
2530-00-450-9262
MFG
LINEAR MOTION LLC
Description
BORE LENGTH: 0.810 INCHES NOMINAL
BORE SMALLEST DIAMETER: 0.591 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE: 7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM
COUNTERBORE FEATURE: NOT INCLUDED
DESIGN TYPE: OFFSET
DRAG LINK END CHARACTERISTIC: W/BALL STUD BORE
SECTOR SHAFT MOUNTING END OVERALL THICKNESS: 1.310 INCHES NOMINAL
SECTOR SHAFT MOUNTING END OVERALL WIDTH: 2.750 INCHES NOMINAL
SECTOR SHAFT MOUNTING END SERRATED BORE: INCLUDED
SERRATION INCLUDED ANGLE IN DEG: 80.0
SMALL END MAJOR DIAMETER: 1.189 INCHES NOMINAL
SMALL END TEETH DEPTH: ANY ACCEPTABLE
TAPER: 0.750 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.880 INCHES NOMINAL
TEETH CUT ANGLE IN DEG: 1 DEGREE,37 MINUTES
TEETH QUANTITY: 32
Related Searches:
5690724
ARM,STEERING GEAR
NSN, MFG P/N
2530004509262
NSN
2530-00-450-9262
MFG
LINEAR MOTION LLC
Description
BORE LENGTH: 0.810 INCHES NOMINAL
BORE SMALLEST DIAMETER: 0.591 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE: 7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM
COUNTERBORE FEATURE: NOT INCLUDED
DESIGN TYPE: OFFSET
DRAG LINK END CHARACTERISTIC: W/BALL STUD BORE
SECTOR SHAFT MOUNTING END OVERALL THICKNESS: 1.310 INCHES NOMINAL
SECTOR SHAFT MOUNTING END OVERALL WIDTH: 2.750 INCHES NOMINAL
SECTOR SHAFT MOUNTING END SERRATED BORE: INCLUDED
SERRATION INCLUDED ANGLE IN DEG: 80.0
SMALL END MAJOR DIAMETER: 1.189 INCHES NOMINAL
SMALL END TEETH DEPTH: ANY ACCEPTABLE
TAPER: 0.750 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.880 INCHES NOMINAL
TEETH CUT ANGLE IN DEG: 1 DEGREE,37 MINUTES
TEETH QUANTITY: 32
Related Searches:
30307
AXLE HOUSING
NSN, MFG P/N
2530004509271
NSN
2530-00-450-9271
MFG
WESTERN MFG CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 32.188 IN. O/A LG; FLANGED ONE END; 4.375 IN. OD OF FLANGE; 0.438 IN. FLANGE THK; 6 MOUNTING HOLES 0.375 IN. DIA; EQUALLY SPACED ON 3.625 IN. BOLT CIRCLE; SECOND END THD MALE,1-1/2-18 THD SIZE; 0.750 IN. THD LG
Related Searches:
30307L
AXLE HOUSING
NSN, MFG P/N
2530004509271
NSN
2530-00-450-9271
MFG
MIDWEST GEAR & TOOL INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 32.188 IN. O/A LG; FLANGED ONE END; 4.375 IN. OD OF FLANGE; 0.438 IN. FLANGE THK; 6 MOUNTING HOLES 0.375 IN. DIA; EQUALLY SPACED ON 3.625 IN. BOLT CIRCLE; SECOND END THD MALE,1-1/2-18 THD SIZE; 0.750 IN. THD LG
Related Searches:
30307L
AXLE HOUSING
NSN, MFG P/N
2530004509271
NSN
2530-00-450-9271
MFG
WESTERN MFG CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 32.188 IN. O/A LG; FLANGED ONE END; 4.375 IN. OD OF FLANGE; 0.438 IN. FLANGE THK; 6 MOUNTING HOLES 0.375 IN. DIA; EQUALLY SPACED ON 3.625 IN. BOLT CIRCLE; SECOND END THD MALE,1-1/2-18 THD SIZE; 0.750 IN. THD LG
Related Searches:
20001
HOUSING,AXLE
NSN, MFG P/N
2530004509272
NSN
2530-00-450-9272
MFG
WESTERN MFG CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 0.375-16 NC,4 HOLES,0.312-18 NC,6 HOLES,3.625 IN.BC,2.312 IN.ID ONE END,2.0472 IN.MIN 2.0479 IN.MAXOPPOSITE END
Related Searches:
20001
HOUSING,AXLE
NSN, MFG P/N
2530004509272
NSN
2530-00-450-9272
MFG
WESTERN MFG CO
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 0.375-16 NC,4 HOLES,0.312-18 NC,6 HOLES,3.625 IN.BC,2.312 IN.ID ONE END,2.0472 IN.MIN 2.0479 IN.MAXOPPOSITE END
Related Searches:
31-8-177
BRAKE SHOE
NSN, MFG P/N
2530004509276
NSN
2530-00-450-9276
MFG
LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE
Description
ACTUATION METHOD AND LOCATION: CAM INTERNAL
APPLICATION TYPE: DRY
DESIGN CONTROL REFERENCE: 8-403
DRUM DIAMETER FOR WHICH DESIGNED: 22.022 INCHES MINIMUM AND 22.032 INCHES MAXIMUM
DRUM WIDTH FOR WHICH DESIGNED: 5.500 INCHES NOMINAL
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FRICTION LINING
FRICTION LINING MATERIAL: ASBESTOS COMPOSITION
MANUFACTURERS CODE: 60250
SEGMENT QUANTITY: 1
SURFACE CONDITION AND LOCATION: BOTH SIDES GROUND
THE MANUFACTURERS DATA:
Related Searches:
8-177
BRAKE SHOE
NSN, MFG P/N
2530004509276
NSN
2530-00-450-9276
MFG
MOTION CONTROL INDUSTRIES INC.
Description
ACTUATION METHOD AND LOCATION: CAM INTERNAL
APPLICATION TYPE: DRY
DESIGN CONTROL REFERENCE: 8-403
DRUM DIAMETER FOR WHICH DESIGNED: 22.022 INCHES MINIMUM AND 22.032 INCHES MAXIMUM
DRUM WIDTH FOR WHICH DESIGNED: 5.500 INCHES NOMINAL
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FRICTION LINING
FRICTION LINING MATERIAL: ASBESTOS COMPOSITION
MANUFACTURERS CODE: 60250
SEGMENT QUANTITY: 1
SURFACE CONDITION AND LOCATION: BOTH SIDES GROUND
THE MANUFACTURERS DATA:
Related Searches:
8-177
BRAKE SHOE
NSN, MFG P/N
2530004509276
NSN
2530-00-450-9276
MFG
GOODRICH CORPORATION DBA GOODRICH AEROSPACE DIV AIRCRAFT WHEELS AND BRAKES
Description
ACTUATION METHOD AND LOCATION: CAM INTERNAL
APPLICATION TYPE: DRY
DESIGN CONTROL REFERENCE: 8-403
DRUM DIAMETER FOR WHICH DESIGNED: 22.022 INCHES MINIMUM AND 22.032 INCHES MAXIMUM
DRUM WIDTH FOR WHICH DESIGNED: 5.500 INCHES NOMINAL
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FRICTION LINING
FRICTION LINING MATERIAL: ASBESTOS COMPOSITION
MANUFACTURERS CODE: 60250
SEGMENT QUANTITY: 1
SURFACE CONDITION AND LOCATION: BOTH SIDES GROUND
THE MANUFACTURERS DATA:
Related Searches:
8-403
BRAKE SHOE
NSN, MFG P/N
2530004509276
NSN
2530-00-450-9276
MFG
MOTION CONTROL INDUSTRIES INC.
Description
ACTUATION METHOD AND LOCATION: CAM INTERNAL
APPLICATION TYPE: DRY
DESIGN CONTROL REFERENCE: 8-403
DRUM DIAMETER FOR WHICH DESIGNED: 22.022 INCHES MINIMUM AND 22.032 INCHES MAXIMUM
DRUM WIDTH FOR WHICH DESIGNED: 5.500 INCHES NOMINAL
FABRICATION METHOD: MOLDED
FEATURES PROVIDED: FRICTION LINING
FRICTION LINING MATERIAL: ASBESTOS COMPOSITION
MANUFACTURERS CODE: 60250
SEGMENT QUANTITY: 1
SURFACE CONDITION AND LOCATION: BOTH SIDES GROUND
THE MANUFACTURERS DATA:
Related Searches:
8EC8UFS
ADAPTER,ACTUATOR
NSN, MFG P/N
2530004509278
NSN
2530-00-450-9278
MFG
VEYANCE TECHNOLOGIES INC. DIV ENGINEERED PRODUCTS
Description
ADAPTER,ACTUATOR
Related Searches:
8EC8UFS
ADAPTER,ACTUATOR
NSN, MFG P/N
2530004509278
NSN
2530-00-450-9278
MFG
VEYANCE TECHNOLOGIES INC. DIV ENGINEERED PRODUCTS
Description
ADAPTER,ACTUATOR
Related Searches:
8EC8UFS
ADAPTER,ACTUATOR
NSN, MFG P/N
2530004509278
NSN
2530-00-450-9278
MFG
ANCHOR SWAN CORP SUB OF AMERACE CORP
Description
ADAPTER,ACTUATOR
Related Searches:
8EC8UFS
ADAPTER,ACTUATOR
NSN, MFG P/N
2530004509278
NSN
2530-00-450-9278
MFG
ANCHOR SWAN CORP SUB OF AMERACE CORP
Description
ADAPTER,ACTUATOR