My Quote Request
3040-00-509-1052
20 Products
1548390-6
WEIGHT,COUNTERBALANCE
NSN, MFG P/N
3040005091052
NSN
3040-00-509-1052
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-TUCSON
Description
DESIGN CONTROL REFERENCE: 1548390-6
END ITEM IDENTIFICATION: ROTOR GENERATOR P/N 28B26-3-1A
MANUFACTURERS CODE: 64547
SPECIAL FEATURES: MATERIAL TUNGSTEN WIRE,NON/MAGNETIC BINDER,DIA. 0.093 IN.,LENGTH 0.547 IN.
THE MANUFACTURERS DATA:
Related Searches:
2487641
SHAFT,STUD
NSN, MFG P/N
3040005081785
NSN
3040-00-508-1785
MFG
GOODRICH CORPORATION DIV POWER TRANSMISSION SYSTEMS
Description
DESIGN CONTROL REFERENCE: 2487641
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL AMS6322,0.805 IN. LG
MANUFACTURERS CODE: 92003
THE MANUFACTURERS DATA:
Related Searches:
817005-1
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005081835
NSN
3040-00-508-1835
817005-1
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005081835
NSN
3040-00-508-1835
MFG
RAYTHEON COMPANY
Description
BOLT HOLE QUANTITY: 2
BOLT HOLE SIZE: 0.046 IN. DIA
BORE INSIDE DIAMETER: 0.046 INCHES NOMINAL
MATERIAL: STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766, CLASS 304 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL HEIGHT: 0.100 INCHES NOMINAL
OVERALL LENGTH: 0.785 INCHES NOMINAL
SPECIAL FEATURES: CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES: 0.360 IN.ETWEEN CENTERS
WIDTH: 0.260 INCHES NOMINAL
Related Searches:
3269977
GEAR ASSEMBLY
NSN, MFG P/N
3040005082568
NSN
3040-00-508-2568
MFG
HATCH & KIRK INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 1 DRIVE SCAVENGING PUMP,4.750 IN. OD,2.813 IN. GR FACE,RH HELIX W/1 PLUG-DRIVE GEAR OIL HOLE
Related Searches:
3269977
GEAR ASSEMBLY
NSN, MFG P/N
3040005082568
NSN
3040-00-508-2568
MFG
HATCH & KIRK INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 1 DRIVE SCAVENGING PUMP,4.750 IN. OD,2.813 IN. GR FACE,RH HELIX W/1 PLUG-DRIVE GEAR OIL HOLE
Related Searches:
3269977
GEAR ASSEMBLY
NSN, MFG P/N
3040005082568
NSN
3040-00-508-2568
MFG
GENERAL MOTORS CORP ELECTRO-MOTIVE DIV
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 1 DRIVE SCAVENGING PUMP,4.750 IN. OD,2.813 IN. GR FACE,RH HELIX W/1 PLUG-DRIVE GEAR OIL HOLE
Related Searches:
3269977
GEAR ASSEMBLY
NSN, MFG P/N
3040005082568
NSN
3040-00-508-2568
MFG
GENERAL MOTORS CORP ELECTRO-MOTIVE DIV
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: 1 DRIVE SCAVENGING PUMP,4.750 IN. OD,2.813 IN. GR FACE,RH HELIX W/1 PLUG-DRIVE GEAR OIL HOLE
Related Searches:
210752PC4
SHAFT,SHOULDERED
NSN, MFG P/N
3040005084586
NSN
3040-00-508-4586
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 0.2483 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
FIRST END STYLE: 1 PLAIN
LARGEST STEP DIAMETER: 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
MATERIAL: STEEL
OVERALL LENGTH: 5.880 INCHES NOMINAL
SECOND END DIAMETER: 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
SECOND END STYLE: 1 PLAIN
STEP QUANTITY: 3
Related Searches:
315388
GEARSHAFT,HELICAL
NSN, MFG P/N
3040005084647
NSN
3040-00-508-4647
MFG
REXNORD LLC D IV FALK GEAR GROUP DIVISION
Description
FACE WIDTH: 1.750 INCHES NOMINAL
GEAR MATERIAL: STEEL
GEAR OUTSIDE DIAMETER: 3.084 INCHES NOMINAL
OVERALL LENGTH: 8.562 INCHES NOMINAL
SHAFT DIAMETER: 1.573 INCHES NOMINAL
SHAFT END TYPE: BEARING SEAT AND THREADED INTERNAL
SHAFT LENGTH: 0.875 INCHES NOMINAL
SHAFT MATERIAL: STEEL
SHAFT TYPE: STRAIGHT
TEETH QUANTITY: 29
TEETH TYPE: SINGLE HELIX
TOOTH DIRECTION: RIGHT
Related Searches:
5043800
WORM SHAFT
NSN, MFG P/N
3040005085094
NSN
3040-00-508-5094
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 5043800
END SIMILARITY: NOT IDENTICAL
MANUFACTURERS CODE: 19200
MATERIAL: STEEL, CORROSION RESISTING
OVERALL LENGTH: 4.406 INCHES NOMINAL
SHAFT LOCATION: BOTH ENDS OF WORM
STRAIGHT UNTHREADED LENGTH: 0.562 INCHES NOMINAL FIRST END, FIRST PORTION 0.538 INCHES NOMINAL FIRST END, SECOND PORTION 0.752 INCHES NOMINAL SECOND END, THIRD PORTION 0.480 INCHES NOMINAL SECOND END, FOURTH PORTION 0.194 INCHES NOMINAL SECOND END, FIFTH PORTION 0.047 INCHES NOMINAL
STRAIGHT UNTHREADED SECTION DIAMETER: 0.370 INCHES NOMINAL FIRST END, FIRST PORTION 0.374 INCHES NOMINAL FIRST END, SECOND PORTION 0.340 INCHES NOMINAL SECOND END, THIRD PORTION 0.625 INCHES NOMINAL SECOND END, FOURTH PORTION 0.340 INCHES NOMINAL SECOND END, FIFTH PORTION 0.308 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATED
THE MANUFACTURERS DATA:
UNTHREADED SECTION PIN HOLE DIAMETER: 0.1090 INCHES NOMINAL SECOND END, SEVENTH PORTION
WORM BODY LENGTH: 1.000 INCHES NOMINAL
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 3 DEG 10 MIN
WORM OUTSIDE DIAMETER: 0.640 INCHES NOMINAL
WORM PITCH DIAMETER: 0.578 INCHES NOMINAL
WORM PRESSURE ANGLE IN DEG: 29.000
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.100 INCHES NOMINAL
WORM THREAD QUANTITY: 1
WORM THREAD SECTION LENGTH: 0.944 INCHES NOMINAL
~1: SECOND END, SIXTH PORTION 0.3128 INCHES NOMINAL SECOND END, SEVENTH PORTION
~1: SECOND END, SIXTH PORTION 0.833 INCHES NOMINAL SECOND END, SEVENTH PORTION
Related Searches:
7666232
LEVER,REMOTE CONTROL
NSN, MFG P/N
3040005085171
NSN
3040-00-508-5171
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
BORE DIAMETER: 0.377 INCHES NOMINAL
BORE LENGTH: 0.562 INCHES NOMINAL
BORE TYPE: PLAIN STRAIGHT
FEATURES PROVIDED: LINK END THREADED HOLE
LINK END THICKNESS: 0.500 INCHES NOMINAL
MATERIAL: COPPER ALLOY
SCREW THREAD SERIES DESIGNATOR: UNC
SHAFT END THICKNESS: 0.562 INCHES NOMINAL
THREAD LENGTH: 1.188 INCHES NOMINAL
THREAD SIZE: 1/4-20
Related Searches:
68A327181-1003
CONNECTING LINK,RIGID
NSN, MFG P/N
3040005089045
NSN
3040-00-508-9045
MFG
BOEING COMPANY THE DBA BOEING
Description
(NON-CORE DATA) CONNECTING HOLE BEARING LOCATION: BOTH ENDS
BODY CONSTRUCTION: SOLID
DESIGN CONTROL REFERENCE: 68A327181-1003
MANUFACTURERS CODE: 76301
THE MANUFACTURERS DATA:
Related Searches:
68A327181-1003
CONNECTING LINK,RIGID
NSN, MFG P/N
3040005089045
NSN
3040-00-508-9045
MFG
K & K PRECISION MANUFACTURING INC
Description
(NON-CORE DATA) CONNECTING HOLE BEARING LOCATION: BOTH ENDS
BODY CONSTRUCTION: SOLID
DESIGN CONTROL REFERENCE: 68A327181-1003
MANUFACTURERS CODE: 76301
THE MANUFACTURERS DATA:
Related Searches:
8B724263-3
SHAFT,STRAIGHT
NSN, MFG P/N
3040005089510
NSN
3040-00-508-9510
MFG
HILLER AIRCRAFT CORPORATION
Description
DESIGN CONTROL REFERENCE: 8B724263-3
END SIMILARITY: IDENTICAL
MANUFACTURERS CODE: 89446
OVERALL LENGTH: 7.094 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
4016T53P06
CAM,CONTROL
NSN, MFG P/N
3040005089639
NSN
3040-00-508-9639
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
DESIGN CONTROL REFERENCE: 4016T53P06
III END ITEM IDENTIFICATION: ACFT ENGINE FUEL CONTROL
MANUFACTURERS CODE: 99207
SPECIAL FEATURES: CRES AMS 5630;IRREGULAR SHAPE;APPROX DIM. 1.703 IN. LG;1.370 IN. DIA
THE MANUFACTURERS DATA:
Related Searches:
H260I00400
SHAFT,ROCKER ARM
NSN, MFG P/N
3040005090345
NSN
3040-00-509-0345
MFG
TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 1 IN. OD; 19-3/8 IN. LG O/A; BOTH ENDS THREADED INTERNALLY 5/8-18 UNF 3/4 IN. THD LG; 8 SMALL HOLES 3/16 IN. DIA THROUGH 1 WALL ONLY; 4 LARGER HOLES 7/16 IN. DIA THROUGH BOTH WALLS
Related Searches:
H260I400
SHAFT,ROCKER ARM
NSN, MFG P/N
3040005090345
NSN
3040-00-509-0345
MFG
TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 1 IN. OD; 19-3/8 IN. LG O/A; BOTH ENDS THREADED INTERNALLY 5/8-18 UNF 3/4 IN. THD LG; 8 SMALL HOLES 3/16 IN. DIA THROUGH 1 WALL ONLY; 4 LARGER HOLES 7/16 IN. DIA THROUGH BOTH WALLS
Related Searches:
H260I400
SHAFT,ROCKER ARM
NSN, MFG P/N
3040005090345
NSN
3040-00-509-0345
MFG
HARSCO CORP BMY-COMBAT SYSTEMS DIV
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 1 IN. OD; 19-3/8 IN. LG O/A; BOTH ENDS THREADED INTERNALLY 5/8-18 UNF 3/4 IN. THD LG; 8 SMALL HOLES 3/16 IN. DIA THROUGH 1 WALL ONLY; 4 LARGER HOLES 7/16 IN. DIA THROUGH BOTH WALLS
Related Searches:
T427I400
SHAFT,SHOULDERED
NSN, MFG P/N
3040005090348
NSN
3040-00-509-0348
MFG
TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC
Description
SHAFT,SHOULDERED
Related Searches:
70773
SHAFT,SHOULDERED
NSN, MFG P/N
3040005090964
NSN
3040-00-509-0964
MFG
ITT CORPORATION DBA ITT GILFILLAN
Description
SHAFT,SHOULDERED