My Quote Request
3040-00-518-0890
20 Products
5180890
WORM SHAFT
NSN, MFG P/N
3040005180890
NSN
3040-00-518-0890
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 5180890
END SIMILARITY: NOT IDENTICAL
III FSC APPLICATION DATA: MOUNT,TELESCOPE,INTEGRATED WITH FIRE CONTROL EQUIPMENT
KEYWAY DEPTH: 0.067 INCHES NOMINAL SECOND END, FIFTH PORTION
KEYWAY WIDTH: 0.093 INCHES NOMINAL SECOND END, FIFTH PORTION
MANUFACTURERS CODE: 19200
MATERIAL: STEEL
OVERALL LENGTH: 5.313 INCHES NOMINAL
SCREW THREAD SERIES DESIGNATOR: UNF SECOND END, FIFTH PORTION
SHAFT HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM
SHAFT LOCATION: BOTH ENDS OF WORM
SHAFT THREAD DIRECTION: RIGHT-HAND SECOND END, FIFTH PORTION
STRAIGHT UNTHREADED LENGTH: 0.7825 INCHES NOMINAL FIRST END, FIRST PORTION 0.313 INCHES NOMINAL FIRST END, SECOND PORTION 0.500 INCHES NOMINAL FIRST END, THIRD PORTION 0.563 INCHES NOMINAL SECOND END, FIRST PORTION 1.234 INCHES NOMINAL SECOND END, SECOND PORTION 0.790 INCHES NOMINAL
STRAIGHT UNTHREADED SECTION DIAMETER: 0.390 INCHES NOMINAL FIRST END, FIRST PORTION 0.340 INCHES NOMINAL FIRST END, SECOND PORTION 0.625 INCHES NOMINAL FIRST END, THIRD PORTION 0.390 INCHES NOMINAL SECOND END, FIRST PORTION 0.375 INCHES NOMINAL SECOND END, SECOND PORTION 0.340 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATED
TEETH HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM
THE MANUFACTURERS DATA:
THREAD LENGTH: 0.219 INCHES NOMINAL SECOND END, FIFTH PORTION
WORM BODY LENGTH: 0.810 INCHES NOMINAL
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 5 DEG 52 MIN
WORM OUTSIDE DIAMETER: 0.625 INCHES NOMINAL
WORM PITCH DIAMETER: 0.519 INCHES NOMINAL
WORM PRESSURE ANGLE IN DEG: 29.000
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.1666 INCHES NOMINAL
WORM THREAD QUANTITY: 1
WORM THREAD SECTION LENGTH: 0.810 INCHES NOMINAL
~1: SECOND END, THIRD PORTION 0.219 INCHES NOMINAL SECOND END, FOURTH PORTION
~1: SECOND END, THIRD PORTION 0.313 INCHES NOMINAL SECOND END, FOURTH PORTION
Related Searches:
5181698
SHAFT,SHOULDERED
NSN, MFG P/N
3040005181698
NSN
3040-00-518-1698
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 5181698
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 0.2540 INCHES NOMINAL
FIRST END INTERNAL THREAD LENGTH: 0.531 INCHES NOMINAL
FIRST END STYLE: 9 INTERNAL THREADED
LARGEST STEP DIAMETER: 0.406 INCHES NOMINAL
MANUFACTURERS CODE: 19200
MATERIAL: STEEL CORROSION RESISTING
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 2.100 INCHES NOMINAL
SECOND END DIAMETER: 0.4060 INCHES NOMINAL
SECOND END INTERNAL THREAD LENGTH: 0.531 INCHES NOMINAL
SECOND END STYLE: 9 INTERNAL THREADED
STEP QUANTITY: 3
SURFACE FINISH: 125.0 MICROINCHES
THE MANUFACTURERS DATA:
Related Searches:
5181698
SHAFT,SHOULDERED
NSN, MFG P/N
3040005181698
NSN
3040-00-518-1698
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 5181698
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 0.2540 INCHES NOMINAL
FIRST END INTERNAL THREAD LENGTH: 0.531 INCHES NOMINAL
FIRST END STYLE: 9 INTERNAL THREADED
LARGEST STEP DIAMETER: 0.406 INCHES NOMINAL
MANUFACTURERS CODE: 19200
MATERIAL: STEEL CORROSION RESISTING
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 2.100 INCHES NOMINAL
SECOND END DIAMETER: 0.4060 INCHES NOMINAL
SECOND END INTERNAL THREAD LENGTH: 0.531 INCHES NOMINAL
SECOND END STYLE: 9 INTERNAL THREADED
STEP QUANTITY: 3
SURFACE FINISH: 125.0 MICROINCHES
THE MANUFACTURERS DATA:
Related Searches:
5182044
SHAFT,SHOULDERED
NSN, MFG P/N
3040005182044
NSN
3040-00-518-2044
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
END SIMILARITY: NOT IDENTICAL
FIRST END INTERNAL THREAD LENGTH: 0.375 INCHES NOMINAL
FIRST END STYLE: 9 INTERNAL THREADED
LARGEST STEP DIAMETER: 0.408 INCHES NOMINAL
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 2.6875 INCHES NOMINAL
SECOND END DIAMETER: 0.4080 INCHES NOMINAL
SECOND END INTERNAL THREAD LENGTH: 0.375 INCHES NOMINAL
SECOND END STYLE: 9 INTERNAL THREADED
SPECIAL FEATURES: FIRST END SHAFT IS TAPERED;SECOND END IS DRILLED FOR 2 0.078 IN.PINS,1/8 IN.DEEP,PARALLEL WITH AXIS OF SHAFT
STEP QUANTITY: 3
Related Searches:
5182044
SHAFT,SHOULDERED
NSN, MFG P/N
3040005182044
NSN
3040-00-518-2044
MFG
DANKA OFFICE IMAGING COMPANY
Description
END SIMILARITY: NOT IDENTICAL
FIRST END INTERNAL THREAD LENGTH: 0.375 INCHES NOMINAL
FIRST END STYLE: 9 INTERNAL THREADED
LARGEST STEP DIAMETER: 0.408 INCHES NOMINAL
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 2.6875 INCHES NOMINAL
SECOND END DIAMETER: 0.4080 INCHES NOMINAL
SECOND END INTERNAL THREAD LENGTH: 0.375 INCHES NOMINAL
SECOND END STYLE: 9 INTERNAL THREADED
SPECIAL FEATURES: FIRST END SHAFT IS TAPERED;SECOND END IS DRILLED FOR 2 0.078 IN.PINS,1/8 IN.DEEP,PARALLEL WITH AXIS OF SHAFT
STEP QUANTITY: 3
Related Searches:
5182044
SHAFT,SHOULDERED
NSN, MFG P/N
3040005182044
NSN
3040-00-518-2044
MFG
EASTMAN KODAK CO COMMERCIAL & GOVERNMENT SYSTEMS
Description
END SIMILARITY: NOT IDENTICAL
FIRST END INTERNAL THREAD LENGTH: 0.375 INCHES NOMINAL
FIRST END STYLE: 9 INTERNAL THREADED
LARGEST STEP DIAMETER: 0.408 INCHES NOMINAL
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 2.6875 INCHES NOMINAL
SECOND END DIAMETER: 0.4080 INCHES NOMINAL
SECOND END INTERNAL THREAD LENGTH: 0.375 INCHES NOMINAL
SECOND END STYLE: 9 INTERNAL THREADED
SPECIAL FEATURES: FIRST END SHAFT IS TAPERED;SECOND END IS DRILLED FOR 2 0.078 IN.PINS,1/8 IN.DEEP,PARALLEL WITH AXIS OF SHAFT
STEP QUANTITY: 3
Related Searches:
32-83048-5
SHAFT,STRAIGHT
NSN, MFG P/N
3040005182692
NSN
3040-00-518-2692
MFG
BOEING COMPANY THE DBA BOEING
Description
DESIGN CONTROL REFERENCE: 32-83048-5
END SIMILARITY: IDENTICAL
FIRST END DIAMETER: 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM
FIRST END DISTANCE FROM HOLE CENTER TO END: 0.400 INCHES NOMINAL
FIRST END HOLE DIAMETER: 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM
FIRST END STYLE: 23 UNTHREADED CROSS DRILLED
MANUFACTURERS CODE: 76301
MATERIAL: ALUMINUM ALLOY 2024
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-268 CONDITION T4 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 3.160 INCHES NOMINAL
SPECIAL FEATURES: 1.313 IN. LG BY 0.180 IN. W SLOT 45 DEG OFFSET FROM END HOLES
SURFACE FINISH: 125.0 MICROINCHES
THE MANUFACTURERS DATA:
Related Searches:
3912422
PAWL
NSN, MFG P/N
3040005184268
NSN
3040-00-518-4268
MFG
GENERAL MOTORS LLC DBA GENERAL MOTORS
Description
PAWL
Related Searches:
3912422
PAWL
NSN, MFG P/N
3040005184268
NSN
3040-00-518-4268
MFG
GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
Description
PAWL
Related Searches:
PA9393C
SHAFT,SHOULDERED
NSN, MFG P/N
3040005184289
NSN
3040-00-518-4289
MFG
HALDEX HYDRAULICS CORP
Description
SHAFT,SHOULDERED
Related Searches:
PA9393C
SHAFT,SHOULDERED
NSN, MFG P/N
3040005184289
NSN
3040-00-518-4289
MFG
HALDEX HYDRAULICS CORP
Description
SHAFT,SHOULDERED
Related Searches:
94409-1
BELL CRANK
NSN, MFG P/N
3040005184310
NSN
3040-00-518-4310
MFG
NORTHROP GRUMMAN CORPORATION DBA WESTERN REGION DIV INTEGRATED SYSTEMS SECTOR
Description
BORE DIAMETER: 0.560 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 94409-1
MANUFACTURERS CODE: 77646
MATERIAL: STEEL
SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
Related Searches:
A299643
SHAFT,SHOULDERED
NSN, MFG P/N
3040005184804
NSN
3040-00-518-4804
MFG
BRITISH AEROSPACE MILITARY AIRCRAFT & AEROSTRUCTURES
Description
SHAFT,SHOULDERED
Related Searches:
A299643
SHAFT,SHOULDERED
NSN, MFG P/N
3040005184804
NSN
3040-00-518-4804
MFG
BAE SYSTEMS OPERATIONS LTD
Description
SHAFT,SHOULDERED
Related Searches:
215-00509-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
215-00509-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BODY MATERIAL: IRON, CAST
CRITICALITY CODE JUSTIFICATION: FEAT
DESIGN CONTROL REFERENCE: 6711-017-2
III END ITEM IDENTIFICATION: USED ON F/A-18 HORNET AIRCRAFT
MANUFACTURERS CODE: 91561
SPECIAL FEATURES: WEAPON SYSTEM ESSENTAIL
THE MANUFACTURERS DATA:
Related Searches:
215-00509-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
215-00509-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
MFG
ERIE ENGINEERED PRODUCTS INC.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BODY MATERIAL: IRON, CAST
CRITICALITY CODE JUSTIFICATION: FEAT
DESIGN CONTROL REFERENCE: 6711-017-2
III END ITEM IDENTIFICATION: USED ON F/A-18 HORNET AIRCRAFT
MANUFACTURERS CODE: 91561
SPECIAL FEATURES: WEAPON SYSTEM ESSENTAIL
THE MANUFACTURERS DATA:
Related Searches:
6711-017
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
6711-017
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
MFG
PARKER HANNIFIN CORPORATION DBA QUICK COUPLING DIV DIV QUICK COUPLING DIVISION BRUNING OPERATION
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BODY MATERIAL: IRON, CAST
CRITICALITY CODE JUSTIFICATION: FEAT
DESIGN CONTROL REFERENCE: 6711-017-2
III END ITEM IDENTIFICATION: USED ON F/A-18 HORNET AIRCRAFT
MANUFACTURERS CODE: 91561
SPECIAL FEATURES: WEAPON SYSTEM ESSENTAIL
THE MANUFACTURERS DATA:
Related Searches:
6711-017-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
6711-017-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
MFG
PARKER HANNIFIN CORPORATION DBA QUICK COUPLING DIV DIV QUICK COUPLING DIVISION BRUNING OPERATION
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BODY MATERIAL: IRON, CAST
CRITICALITY CODE JUSTIFICATION: FEAT
DESIGN CONTROL REFERENCE: 6711-017-2
III END ITEM IDENTIFICATION: USED ON F/A-18 HORNET AIRCRAFT
MANUFACTURERS CODE: 91561
SPECIAL FEATURES: WEAPON SYSTEM ESSENTAIL
THE MANUFACTURERS DATA:
Related Searches:
6711-017-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
6711-017-2
CYLINDER ASSEMBLY,ACTUATING,LINEAR
NSN, MFG P/N
3040005185318
NSN
3040-00-518-5318
MFG
ERIE ENGINEERED PRODUCTS INC.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BODY MATERIAL: IRON, CAST
CRITICALITY CODE JUSTIFICATION: FEAT
DESIGN CONTROL REFERENCE: 6711-017-2
III END ITEM IDENTIFICATION: USED ON F/A-18 HORNET AIRCRAFT
MANUFACTURERS CODE: 91561
SPECIAL FEATURES: WEAPON SYSTEM ESSENTAIL
THE MANUFACTURERS DATA:
Related Searches:
627953
PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY
NSN, MFG P/N
3040005185839
NSN
3040-00-518-5839
627953
PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY
NSN, MFG P/N
3040005185839
NSN
3040-00-518-5839
MFG
PARKER HANNIFIN CORPORATION DBA OILDYNE DIV OILDYNE DIVISION
Description
COMPONENT QUANTITY: 7
END ITEM IDENTIFICATION: 2350-406-3842
END ITEM NAME: LANDING VEHICLE,TRACKED,PERSONNEL,LVTP7
END ITEM SOURCE: 80064
NONSUPPLY ITEMS AND QUANTITIES: 05448 357456 RING 1,05448 409103 PACKING 1,05448 409106 PACKING 1,05448 409108 PACKING 1,05448 409089 PACKING 1
SUPPLY ITEMS AND QUANTITIES: 4320-004-8201 SEAL 1,4320-004-8202 RING WIPER 1