My Quote Request
3040-00-522-3923
20 Products
371108
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005223923
NSN
3040-00-522-3923
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BOLT HOLE QUANTITY: 4
BOLT HOLE SIZE: 1/2 INCH DIAMETER
BORE INSIDE DIAMETER: 0.500 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: 5223923
MANUFACTURERS CODE: 19204
MATERIAL: STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-11415,CLASS C-6 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL HEIGHT: 1.560 INCHES NOMINAL
OVERALL LENGTH: 2.760 INCHES NOMINAL
SPECIAL FEATURES: CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES: IRREGULAR
THE MANUFACTURERS DATA:
WIDTH: 2.380 INCHES NOMINAL
Related Searches:
5222412
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040005222412
NSN
3040-00-522-2412
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
DESIGN CONTROL REFERENCE: 5222412
MANUFACTURERS CODE: 19206
SPECIAL FEATURES: MATERIAL CONSISTS OF:.37-.46C AISI ALLOY STEEL PER FED-STD-66.
THE MANUFACTURERS DATA:
Related Searches:
323874PC1
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040005222434
NSN
3040-00-522-2434
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 5222434
END ITEM IDENTIFICATION: USED ON 2350007968000
MANUFACTURERS CODE: 19204
SPECIAL FEATURES: -46C AISI ALLOY STEEL PER FED-STD-66 OR CASTING PER DWG B1157 7275 COMP 2 OR 3 CLASS A; HARDEN TO ROCKWELL C23-C30 UNLESS OTHERWISE SPECIFIED
THE MANUFACTURERS DATA:
Related Searches:
5222434
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040005222434
NSN
3040-00-522-2434
MFG
ARMY UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL
Description
DESIGN CONTROL REFERENCE: 5222434
END ITEM IDENTIFICATION: USED ON 2350007968000
MANUFACTURERS CODE: 19204
SPECIAL FEATURES: -46C AISI ALLOY STEEL PER FED-STD-66 OR CASTING PER DWG B1157 7275 COMP 2 OR 3 CLASS A; HARDEN TO ROCKWELL C23-C30 UNLESS OTHERWISE SPECIFIED
THE MANUFACTURERS DATA:
Related Searches:
298785PC4
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
298785PC4
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BOLT HOLE QUANTITY: 2
BOLT HOLE SIZE: 9/32 INCH DIAMETER
BORE INSIDE DIAMETER: 0.590 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 5222477
III END ITEM IDENTIFICATION: GOES ON GUN SP FT 40MM M42A1
MANUFACTURERS CODE: 19206
MATERIAL: COPPER ALLOY
OVERALL HEIGHT: 0.860 INCHES NOMINAL
OVERALL LENGTH: 2.750 INCHES NOMINAL
SPECIAL FEATURES: CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES: 1.890
THE MANUFACTURERS DATA:
WIDTH: 0.906 INCHES NOMINAL
Related Searches:
323900PC5
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
323900PC5
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BOLT HOLE QUANTITY: 2
BOLT HOLE SIZE: 9/32 INCH DIAMETER
BORE INSIDE DIAMETER: 0.590 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 5222477
III END ITEM IDENTIFICATION: GOES ON GUN SP FT 40MM M42A1
MANUFACTURERS CODE: 19206
MATERIAL: COPPER ALLOY
OVERALL HEIGHT: 0.860 INCHES NOMINAL
OVERALL LENGTH: 2.750 INCHES NOMINAL
SPECIAL FEATURES: CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES: 1.890
THE MANUFACTURERS DATA:
WIDTH: 0.906 INCHES NOMINAL
Related Searches:
342190
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BOLT HOLE QUANTITY: 2
BOLT HOLE SIZE: 9/32 INCH DIAMETER
BORE INSIDE DIAMETER: 0.590 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 5222477
III END ITEM IDENTIFICATION: GOES ON GUN SP FT 40MM M42A1
MANUFACTURERS CODE: 19206
MATERIAL: COPPER ALLOY
OVERALL HEIGHT: 0.860 INCHES NOMINAL
OVERALL LENGTH: 2.750 INCHES NOMINAL
SPECIAL FEATURES: CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES: 1.890
THE MANUFACTURERS DATA:
WIDTH: 0.906 INCHES NOMINAL
Related Searches:
5222477
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
5222477
BRACKET,EYE,NONROTATING SHAFT
NSN, MFG P/N
3040005222477
NSN
3040-00-522-2477
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
BOLT HOLE QUANTITY: 2
BOLT HOLE SIZE: 9/32 INCH DIAMETER
BORE INSIDE DIAMETER: 0.590 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 5222477
III END ITEM IDENTIFICATION: GOES ON GUN SP FT 40MM M42A1
MANUFACTURERS CODE: 19206
MATERIAL: COPPER ALLOY
OVERALL HEIGHT: 0.860 INCHES NOMINAL
OVERALL LENGTH: 2.750 INCHES NOMINAL
SPECIAL FEATURES: CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES: 1.890
THE MANUFACTURERS DATA:
WIDTH: 0.906 INCHES NOMINAL
Related Searches:
5222508
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040005222508
NSN
3040-00-522-2508
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
DESIGN CONTROL REFERENCE: 5222508
END ITEM IDENTIFICATION: GOES ON GUN SP FT 40MM M42A1
MANUFACTURERS CODE: 19206
SPECIAL FEATURES: MATERIAL: AISI ALLOY STEEL PER FED-STD-66 OR CASTING PER DWG B11577275 COMP 1,2,3,5 OR 9 CLASS E; 17/32 COUNTERBORED; 3/64 IN. DEEP; INSIDE DIA 0.484; OUTSIDE DIA 0.706
THE MANUFACTURERS DATA:
Related Searches:
5222561
CRANK,FIRING ASSY
NSN, MFG P/N
3040005222561
NSN
3040-00-522-2561
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
CRANK,FIRING ASSY
Related Searches:
5222563
CONNECTING LINK,RIGID
NSN, MFG P/N
3040005222563
NSN
3040-00-522-2563
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
(NON-CORE DATA) MATERIAL: STEEL,QQ-S-633,COMP C1017 TO C1037
(NON-CORE DATA) SURFACE TREATMENT: PHOSPHATE
BODY CONSTRUCTION: SOLID
BODY THICKNESS: 0.250 INCHES NOMINAL
BODY WIDTH: 0.500 INCHES NOMINAL
LINK STYLE: A24 TONGUE ENDS
OVERALL LENGTH: 5.877 INCHES NOMINAL
Related Searches:
5222635
PLATE,RETAINING,SHAFT
NSN, MFG P/N
3040005222635
NSN
3040-00-522-2635
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
DESIGN CONTROL REFERENCE: 5222635
MANUFACTURERS CODE: 19206
MATERIAL: STEEL
MOUNTING HOLE DIAMETER: 0.469 INCHES NOMINAL
MOUNTING HOLE QUANTITY: 1
THE MANUFACTURERS DATA:
THICKNESS: 0.156 INCHES NOMINAL
Related Searches:
298762PC1
PAWL
NSN, MFG P/N
3040005222641
NSN
3040-00-522-2641
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 5222641
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.782 IN. NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED STD 66,AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE COATED;FSC
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
~1: APPLICATION DATA:CANNON,DUAL AUTO GUN,40MM
Related Searches:
323977-1
PAWL
NSN, MFG P/N
3040005222641
NSN
3040-00-522-2641
MFG
NAVAL SEA SYSTEMS COMMAND
Description
DESIGN CONTROL REFERENCE: 5222641
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.782 IN. NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED STD 66,AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE COATED;FSC
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
~1: APPLICATION DATA:CANNON,DUAL AUTO GUN,40MM
Related Searches:
323977PC1
PAWL
NSN, MFG P/N
3040005222641
NSN
3040-00-522-2641
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 5222641
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.782 IN. NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED STD 66,AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE COATED;FSC
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
~1: APPLICATION DATA:CANNON,DUAL AUTO GUN,40MM
Related Searches:
323977PC2
PAWL
NSN, MFG P/N
3040005222641
NSN
3040-00-522-2641
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 5222641
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.782 IN. NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED STD 66,AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE COATED;FSC
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
~1: APPLICATION DATA:CANNON,DUAL AUTO GUN,40MM
Related Searches:
339266
PAWL
NSN, MFG P/N
3040005222641
NSN
3040-00-522-2641
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 5222641
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.782 IN. NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED STD 66,AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE COATED;FSC
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
~1: APPLICATION DATA:CANNON,DUAL AUTO GUN,40MM
Related Searches:
5222641
PAWL
NSN, MFG P/N
3040005222641
NSN
3040-00-522-2641
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
DESIGN CONTROL REFERENCE: 5222641
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.782 IN. NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED STD 66,AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE COATED;FSC
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
~1: APPLICATION DATA:CANNON,DUAL AUTO GUN,40MM
Related Searches:
5222642
PAWL
NSN, MFG P/N
3040005222642
NSN
3040-00-522-2642
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
DESIGN CONTROL REFERENCE: 5222642
MANUFACTURERS CODE: 19206
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
OVERALL LENGTH: 2.101 INCHES NOMINAL
PIVOT PIN HOLE DIAMETER: 0.3922 INCHES NOMINAL
SPECIAL FEATURES: DEPTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.234 IN.NOM;LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT:0.391 IN,NOM;MATERIAL DOCUMENT AND CLASSIFICATION:STEEL,FED,FED-STD-66,COMP AISI 1030 TO 1045;SURFACE FINISH:PHOSPHATE
STYLE DESIGNATOR: A19 CENTER PIVOT, POINTER
THE MANUFACTURERS DATA:
Related Searches:
5222645
PAWL
NSN, MFG P/N
3040005222645
NSN
3040-00-522-2645
MFG
DEPARTMENT OF THE ARMY WATERVLIET ARSENAL SIOWV SP
Description
DESIGN CONTROL REFERENCE: 5222645
MANUFACTURERS CODE: 19206
MATERIAL: STEEL
MATERIAL THICKNESS: 0.746 INCHES NOMINAL
THE MANUFACTURERS DATA: