My Quote Request
3040-00-900-3696
20 Products
35170-1
RING,WIPER
NSN, MFG P/N
3040009003696
NSN
3040-00-900-3696
MFG
TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59
Description
CROSS-SECTIONAL SHAPE STYLE: B8 OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER: 2.378 INCHES NOMINAL
JOINT STYLE: 2 DIAGONAL JOINT
MATERIAL: CARBON OVERALL
MATERIAL THICKNESS: 0.468 INCHES NOMINAL
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL
RING STYLE: 8 CONCENTRIC
Related Searches:
65257-07009-041
CONNECTING LINK,RIGID
NSN, MFG P/N
3040008990923
NSN
3040-00-899-0923
65257-07009-041
CONNECTING LINK,RIGID
NSN, MFG P/N
3040008990923
NSN
3040-00-899-0923
MFG
AIRBUS DEUTSCHLAND GMBH -WERK BREMEN -
Description
(NON-CORE DATA) MATERIAL: ALUMINUM ALLOY, QQ-A-287-CANCELED OR ALUMINUM ALLOY, QQ-A-362, T3-CANCELED
(NON-CORE DATA) SURFACE TREATMENT: ANODIZED, MIL-A-8625
BODY CONSTRUCTION: SOLID
BODY THICKNESS: 0.250 INCHES NOMINAL
III END ITEM IDENTIFICATION: H-53 HELICOPTER
LINK STYLE: A8 ANGLED, EYE ENDS
Related Searches:
457673
GEARSHAFT,SPUR
NSN, MFG P/N
3040008995624
NSN
3040-00-899-5624
MFG
L-3 COMMUNICATIONS CORPORATION DIV LINK SIMULATION & TRAINING DIVISION
Description
GEARSHAFT,SPUR
Related Searches:
457673
GEARSHAFT,SPUR
NSN, MFG P/N
3040008995624
NSN
3040-00-899-5624
MFG
RAYTHEON TECHNICAL SERVICES COMPANY
Description
GEARSHAFT,SPUR
Related Searches:
32-65017-3
SHAFT,SHOULDERED
NSN, MFG P/N
3040008996102
NSN
3040-00-899-6102
MFG
BOEING COMPANY THE DBA BOEING
Description
DESIGN CONTROL REFERENCE: 32-65017-3
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 0.4970 INCHES NOMINAL
FIRST END STYLE: 1 PLAIN
III END ITEM IDENTIFICATION: F-4 AIRCRAFT
LARGEST STEP DIAMETER: 0.497 INCHES NOMINAL
MANUFACTURERS CODE: 76301
MATERIAL: ALUMINUM ALLOY 2024
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,COND T4 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 5.430 INCHES NOMINAL
SECOND END DIAMETER: 0.2480 INCHES NOMINAL
SECOND END DISTANCE FROM HOLE CENTER TO END: 0.220 INCHES NOMINAL
SECOND END HOLE DIAMETER: 0.0940 INCHES NOMINAL
SECOND END STYLE: 23 UNTHREADED CROSS DRILLED
SPECIAL FEATURES: ON FIRST END,FLAT GROOVE CUT 0.562 IN L,HOLE DRILLED THRU SHAFT CENTERED ON FLAT,0.250 DIA
STEP QUANTITY: 6
SURFACE FINISH: 250.0 MICROINCHES
THE MANUFACTURERS DATA:
Related Searches:
8060000654
SHAFT,STRAIGHT
NSN, MFG P/N
3040008996233
NSN
3040-00-899-6233
MFG
NAVCOM DEFENSE ELECTRONICS INC.
Description
DESIGN CONTROL REFERENCE: 8060000654
END SIMILARITY: NOT IDENTICAL
FIRST END DISTANCE FROM END TO GROOVE: 0.410 INCHES NOMINAL
III FSC APPLICATION DATA: 1. RADIO SET,NAVIGATION,AIRBORNE
MANUFACTURERS CODE: 57057
OVERALL LENGTH: 2.921 INCHES NOMINAL
SECOND END DISTANCE FROM HOLE CENTER TO END: 0.250 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
8060000654
SHAFT,STRAIGHT
NSN, MFG P/N
3040008996233
NSN
3040-00-899-6233
MFG
AERONAUTICAL INSTRUMENT & RADIO CO INC USE CAGE CODE 83942 FOR CATALOGING.
Description
DESIGN CONTROL REFERENCE: 8060000654
END SIMILARITY: NOT IDENTICAL
FIRST END DISTANCE FROM END TO GROOVE: 0.410 INCHES NOMINAL
III FSC APPLICATION DATA: 1. RADIO SET,NAVIGATION,AIRBORNE
MANUFACTURERS CODE: 57057
OVERALL LENGTH: 2.921 INCHES NOMINAL
SECOND END DISTANCE FROM HOLE CENTER TO END: 0.250 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
8262021
WORM SHAFT
NSN, MFG P/N
3040008996316
NSN
3040-00-899-6316
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 8262021
END SIMILARITY: NOT IDENTICAL
III FSC APPLICATION DATA: QUADRANT,ELEVATION,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT
MANUFACTURERS CODE: 19200
MATERIAL: STEEL, CORROSION RESISTING
OVERALL LENGTH: 5.070 INCHES NOMINAL
SCREW THREAD SERIES DESIGNATOR: UNF SECOND END, SECOND PORTION
SHAFT LOCATION: BOTH ENDS OF WORM
SHAFT THREAD DIRECTION: RIGHT-HAND SECOND END, SECOND PORTION
STRAIGHT UNTHREADED LENGTH: 0.375 INCHES NOMINAL FIRST END, FIRST PORTION 0.825 INCHES NOMINAL SECOND END, FIRST PORTION
STRAIGHT UNTHREADED SECTION DIAMETER: 0.041 INCHES NOMINAL FIRST END, FIRST PORTION 0.380 INCHES NOMINAL SECOND END, FIRST PORTION
SURFACE TREATMENT: PASSIVATED
THE MANUFACTURERS DATA:
THREAD LENGTH: 0.330 INCHES NOMINAL SECOND END, SECOND PORTION
THREADED SECTION PIN HOLE DIAMETER: 0.094 INCHES NOMINAL SECOND END, SECOND PORTION
WORM BODY LENGTH: 0.820 INCHES NOMINAL
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 4 DEG 59 MIN
WORM OUTSIDE DIAMETER: 0.753 INCHES NOMINAL
WORM PITCH DIAMETER: 0.647 INCHES NOMINAL
WORM PRESSURE ANGLE IN DEG: 14.500
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.1666 INCHES NOMINAL
WORM THREAD QUANTITY: 1
WORM THREAD SECTION LENGTH: 0.820 INCHES NOMINAL
Related Searches:
635E318P02
SHAFT,SHOULDERED
NSN, MFG P/N
3040008996506
NSN
3040-00-899-6506
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
SHAFT,SHOULDERED
Related Searches:
8247720
WORM SHAFT
NSN, MFG P/N
3040008996936
NSN
3040-00-899-6936
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 8247720
MANUFACTURERS CODE: 19200
MATERIAL: STEEL, CORROSION RESISTING
OVERALL LENGTH: 1.344 INCHES NOMINAL
SHAFT LOCATION: ONE END OF WORM
SPECIAL FEATURES: ITEM CONTAINS ONE HOLE NO. 29 (.136) DRILL TO DEPTH OF DRILL POINT; ONE HOLE NO. 42 (.093) DRILL .112-48UNF-2B
THE MANUFACTURERS DATA:
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 4 DEG 35 MIN
WORM OUTSIDE DIAMETER: 1.206 INCHES NOMINAL
WORM PITCH DIAMETER: 1.038 INCHES MINIMUM AND 1.039 INCHES MAXIMUM
WORM PRESSURE ANGLE IN DEG: 14.500
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.261 INCHES NOMINAL
WORM THREAD QUANTITY: 3
Related Searches:
8247720
WORM SHAFT
NSN, MFG P/N
3040008996936
NSN
3040-00-899-6936
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 8247720
MANUFACTURERS CODE: 19200
MATERIAL: STEEL, CORROSION RESISTING
OVERALL LENGTH: 1.344 INCHES NOMINAL
SHAFT LOCATION: ONE END OF WORM
SPECIAL FEATURES: ITEM CONTAINS ONE HOLE NO. 29 (.136) DRILL TO DEPTH OF DRILL POINT; ONE HOLE NO. 42 (.093) DRILL .112-48UNF-2B
THE MANUFACTURERS DATA:
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 4 DEG 35 MIN
WORM OUTSIDE DIAMETER: 1.206 INCHES NOMINAL
WORM PITCH DIAMETER: 1.038 INCHES MINIMUM AND 1.039 INCHES MAXIMUM
WORM PRESSURE ANGLE IN DEG: 14.500
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.261 INCHES NOMINAL
WORM THREAD QUANTITY: 3
Related Searches:
6025-3
CONNECTING LINK,RIGID
NSN, MFG P/N
3040008997045
NSN
3040-00-899-7045
MFG
BOEING COMPANY THE DBA BOEING
Description
(NON-CORE DATA) MATERIAL: ALUMINUM ALLOY, QQ-A-362, T4-CANCELED
(NON-CORE DATA) SURFACE TREATMENT: ANODIZED AND ZINC CHROMATE
BODY CONSTRUCTION: SOLID
BODY THICKNESS: 0.125 INCHES NOMINAL
BODY WIDTH: 0.380 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 6025-3
LINK STYLE: A1 STRAIGHT
MANUFACTURERS CODE: 43999
OVERALL LENGTH: 5.488 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
8587484
WORM SHAFT
NSN, MFG P/N
3040008997644
NSN
3040-00-899-7644
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 8587484
END SIMILARITY: NOT IDENTICAL
III FSC APPLICATION DATA: MOUNT,TELESCOPE
MANUFACTURERS CODE: 19200
MATERIAL: ALUMINUM,QQ-A-315,ALLOY 52S,COND F
OVERALL LENGTH: 2.156 INCHES NOMINAL
SHAFT HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
SHAFT LOCATION: BOTH ENDS OF WORM
STRAIGHT UNTHREADED LENGTH: 0.188 INCHES NOMINAL FIRST END, FIRST PORTION 0.188 INCHES NOMINAL FIRST END, SECOND PORTION 0.156 INCHES NOMINAL SECOND END, FIRST PORTION 0.875 INCHES NOMINAL SECOND END, SECOND PORTION
STRAIGHT UNTHREADED SECTION DIAMETER: 0.3750 INCHES NOMINAL FIRST END, FIRST PORTION 0.6872 INCHES NOMINAL FIRST END, SECOND PORTION 0.875 INCHES NOMINAL SECOND END, FIRST PORTION 0.3748 INCHES NOMINAL SECOND END, SECOND PORTION
SURFACE TREATMENT: ANODIZED
TEETH HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
THE MANUFACTURERS DATA:
WORM BODY LENGTH: 0.750 INCHES NOMINAL
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 5 DEG 50 MIN.
WORM OUTSIDE DIAMETER: 0.625 INCHES NOMINAL
WORM PITCH DIAMETER: 0.5188 INCHES NOMINAL
WORM PRESSURE ANGLE IN DEG: 14.500
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.1666 INCHES NOMINAL
WORM THREAD QUANTITY: 1
WORM THREAD SECTION LENGTH: 0.750 INCHES NOMINAL
Related Searches:
8587484
WORM SHAFT
NSN, MFG P/N
3040008997644
NSN
3040-00-899-7644
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DESIGN CONTROL REFERENCE: 8587484
END SIMILARITY: NOT IDENTICAL
III FSC APPLICATION DATA: MOUNT,TELESCOPE
MANUFACTURERS CODE: 19200
MATERIAL: ALUMINUM,QQ-A-315,ALLOY 52S,COND F
OVERALL LENGTH: 2.156 INCHES NOMINAL
SHAFT HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
SHAFT LOCATION: BOTH ENDS OF WORM
STRAIGHT UNTHREADED LENGTH: 0.188 INCHES NOMINAL FIRST END, FIRST PORTION 0.188 INCHES NOMINAL FIRST END, SECOND PORTION 0.156 INCHES NOMINAL SECOND END, FIRST PORTION 0.875 INCHES NOMINAL SECOND END, SECOND PORTION
STRAIGHT UNTHREADED SECTION DIAMETER: 0.3750 INCHES NOMINAL FIRST END, FIRST PORTION 0.6872 INCHES NOMINAL FIRST END, SECOND PORTION 0.875 INCHES NOMINAL SECOND END, FIRST PORTION 0.3748 INCHES NOMINAL SECOND END, SECOND PORTION
SURFACE TREATMENT: ANODIZED
TEETH HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
THE MANUFACTURERS DATA:
WORM BODY LENGTH: 0.750 INCHES NOMINAL
WORM BODY TAPERED BEARING SURFACE END: NOT PROVIDED
WORM HELIX ANGLE: 5 DEG 50 MIN.
WORM OUTSIDE DIAMETER: 0.625 INCHES NOMINAL
WORM PITCH DIAMETER: 0.5188 INCHES NOMINAL
WORM PRESSURE ANGLE IN DEG: 14.500
WORM THREAD DIRECTION: RIGHT-HAND
WORM THREAD LEAD: 0.1666 INCHES NOMINAL
WORM THREAD QUANTITY: 1
WORM THREAD SECTION LENGTH: 0.750 INCHES NOMINAL
Related Searches:
103670
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040009003292
NSN
3040-00-900-3292
MFG
HAWKER PACIFIC AEROSPACE
Description
LEVER,MANUAL CONTROL
Related Searches:
35170-1W
RING,WIPER
NSN, MFG P/N
3040009003696
NSN
3040-00-900-3696
MFG
DRESSER-RAND COMPANY DBA STEAM TRBINE MTR GENERATOR DIV
Description
CROSS-SECTIONAL SHAPE STYLE: B8 OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER: 2.378 INCHES NOMINAL
JOINT STYLE: 2 DIAGONAL JOINT
MATERIAL: CARBON OVERALL
MATERIAL THICKNESS: 0.468 INCHES NOMINAL
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL
RING STYLE: 8 CONCENTRIC
Related Searches:
35170-1W
RING,WIPER
NSN, MFG P/N
3040009003696
NSN
3040-00-900-3696
MFG
TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59
Description
CROSS-SECTIONAL SHAPE STYLE: B8 OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER: 2.378 INCHES NOMINAL
JOINT STYLE: 2 DIAGONAL JOINT
MATERIAL: CARBON OVERALL
MATERIAL THICKNESS: 0.468 INCHES NOMINAL
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL
RING STYLE: 8 CONCENTRIC
Related Searches:
W35170-1
RING,WIPER
NSN, MFG P/N
3040009003696
NSN
3040-00-900-3696
MFG
DRESSER-RAND COMPANY DBA STEAM TRBINE MTR GENERATOR DIV
Description
CROSS-SECTIONAL SHAPE STYLE: B8 OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER: 2.378 INCHES NOMINAL
JOINT STYLE: 2 DIAGONAL JOINT
MATERIAL: CARBON OVERALL
MATERIAL THICKNESS: 0.468 INCHES NOMINAL
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL
RING STYLE: 8 CONCENTRIC
Related Searches:
W35170-1
RING,WIPER
NSN, MFG P/N
3040009003696
NSN
3040-00-900-3696
MFG
CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION DIV EPD USE CAGE CODE 0UBG9 FOR CATALOGING.
Description
CROSS-SECTIONAL SHAPE STYLE: B8 OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER: 2.378 INCHES NOMINAL
JOINT STYLE: 2 DIAGONAL JOINT
MATERIAL: CARBON OVERALL
MATERIAL THICKNESS: 0.468 INCHES NOMINAL
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL
RING STYLE: 8 CONCENTRIC
Related Searches:
W35170-1
RING,WIPER
NSN, MFG P/N
3040009003696
NSN
3040-00-900-3696
MFG
TURBODYNE DIV OF DRESSER INDUSTRIES INC SEE CODE 0BR59
Description
CROSS-SECTIONAL SHAPE STYLE: B8 OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER: 2.378 INCHES NOMINAL
JOINT STYLE: 2 DIAGONAL JOINT
MATERIAL: CARBON OVERALL
MATERIAL THICKNESS: 0.468 INCHES NOMINAL
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL
RING STYLE: 8 CONCENTRIC