My Quote Request
3110-00-019-6387
20 Products
1401W12P008
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110000196387
NSN
3110-00-019-6387
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
BORE DIAMETER: 0.2500 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.5470 INCHES NOMINAL
FLANGE WIDTH: 0.0450 INCHES NOMINAL
INNER RING WIDTH: 0.2187 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: OIL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL CORROSION RESISTING OVERALL
OUTER RING OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
OUTER RING WIDTH: 0.1875 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 16A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
2-300-034
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110000189654
NSN
3110-00-018-9654
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM AXIAL AND 0.0018 INCHES MAXIMUM AXIAL
LOCATING FEATURE: NONLOCATING
MANUFACTURERS CODE: 99193
MATERIAL: STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: M4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER M4001,91547 MFR REF SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 2-300-034
RETAINER FABRICATION METHOD: MACHINED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: OUTER RING RACEWAY 6 UIN AA,OUTER RING LIPS 16 UIN AA,OD SURFACE OF OUTER RING 10 UIN AA,ALL SURFACES OF ROLLERS 2 UIN AA,HEAT STABILIZED FOR OPERATION AT M65 TO P350 DEG F,BEARING SPECIFIC DYNAMIC LOAD CAP. 7270 LB,OUTER RING CONTAINERS 6 SLOTS ON EACH
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
SURFACE FINISH: GROUND
TEST DATA DOCUMENT: 91547-E1004 STANDARD AND 91547-AP4903AA STANDARD
~1: FACE EQUALLY SPACED SO THAT THE SLOTS ON 1 FACE ARE DISPLACED BY 30 DEG FROM SLOTS ON THE OPPOSITE FACE,0.050 IN. MIN,0.055 IN. MAX W,0.050 IN. MIN,0.055 IN. MAX DEEP,ID RETAINER AND LIP OF OUTER RING CONCENTRIC WITHIN 0.0003 IN.,OD PERPENDICULAR W/OUTER
~2: RING FACES WITHIN 0.00003 IN. TIR,RETAINER ID AND OD CONCENTRIC WITHIN 0.003 IN. TIR,CENTER RING FACES PARALLEL WITHIN 0.0002 IN.,ROLLER BEARING SURFACE PARALLEL WITHIN 0.000025 AND PERPENDICULAR W/FACES WITHIN 0.00005 IN.
Related Searches:
2-300-034-01
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110000189654
NSN
3110-00-018-9654
2-300-034-01
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110000189654
NSN
3110-00-018-9654
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM AXIAL AND 0.0018 INCHES MAXIMUM AXIAL
LOCATING FEATURE: NONLOCATING
MANUFACTURERS CODE: 99193
MATERIAL: STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: M4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER M4001,91547 MFR REF SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 2-300-034
RETAINER FABRICATION METHOD: MACHINED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: OUTER RING RACEWAY 6 UIN AA,OUTER RING LIPS 16 UIN AA,OD SURFACE OF OUTER RING 10 UIN AA,ALL SURFACES OF ROLLERS 2 UIN AA,HEAT STABILIZED FOR OPERATION AT M65 TO P350 DEG F,BEARING SPECIFIC DYNAMIC LOAD CAP. 7270 LB,OUTER RING CONTAINERS 6 SLOTS ON EACH
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
SURFACE FINISH: GROUND
TEST DATA DOCUMENT: 91547-E1004 STANDARD AND 91547-AP4903AA STANDARD
~1: FACE EQUALLY SPACED SO THAT THE SLOTS ON 1 FACE ARE DISPLACED BY 30 DEG FROM SLOTS ON THE OPPOSITE FACE,0.050 IN. MIN,0.055 IN. MAX W,0.050 IN. MIN,0.055 IN. MAX DEEP,ID RETAINER AND LIP OF OUTER RING CONCENTRIC WITHIN 0.0003 IN.,OD PERPENDICULAR W/OUTER
~2: RING FACES WITHIN 0.00003 IN. TIR,RETAINER ID AND OD CONCENTRIC WITHIN 0.003 IN. TIR,CENTER RING FACES PARALLEL WITHIN 0.0002 IN.,ROLLER BEARING SURFACE PARALLEL WITHIN 0.000025 AND PERPENDICULAR W/FACES WITHIN 0.00005 IN.
Related Searches:
D4-58499
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110000189654
NSN
3110-00-018-9654
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM AXIAL AND 0.0018 INCHES MAXIMUM AXIAL
LOCATING FEATURE: NONLOCATING
MANUFACTURERS CODE: 99193
MATERIAL: STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: M4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER M4001,91547 MFR REF SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 2-300-034
RETAINER FABRICATION METHOD: MACHINED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: OUTER RING RACEWAY 6 UIN AA,OUTER RING LIPS 16 UIN AA,OD SURFACE OF OUTER RING 10 UIN AA,ALL SURFACES OF ROLLERS 2 UIN AA,HEAT STABILIZED FOR OPERATION AT M65 TO P350 DEG F,BEARING SPECIFIC DYNAMIC LOAD CAP. 7270 LB,OUTER RING CONTAINERS 6 SLOTS ON EACH
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
SURFACE FINISH: GROUND
TEST DATA DOCUMENT: 91547-E1004 STANDARD AND 91547-AP4903AA STANDARD
~1: FACE EQUALLY SPACED SO THAT THE SLOTS ON 1 FACE ARE DISPLACED BY 30 DEG FROM SLOTS ON THE OPPOSITE FACE,0.050 IN. MIN,0.055 IN. MAX W,0.050 IN. MIN,0.055 IN. MAX DEEP,ID RETAINER AND LIP OF OUTER RING CONCENTRIC WITHIN 0.0003 IN.,OD PERPENDICULAR W/OUTER
~2: RING FACES WITHIN 0.00003 IN. TIR,RETAINER ID AND OD CONCENTRIC WITHIN 0.003 IN. TIR,CENTER RING FACES PARALLEL WITHIN 0.0002 IN.,ROLLER BEARING SURFACE PARALLEL WITHIN 0.000025 AND PERPENDICULAR W/FACES WITHIN 0.00005 IN.
Related Searches:
R109KEX307
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110000189654
NSN
3110-00-018-9654
R109KEX307
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110000189654
NSN
3110-00-018-9654
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM AXIAL AND 0.0018 INCHES MAXIMUM AXIAL
LOCATING FEATURE: NONLOCATING
MANUFACTURERS CODE: 99193
MATERIAL: STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: M4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER M4001,91547 MFR REF SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 2-300-034
RETAINER FABRICATION METHOD: MACHINED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: OUTER RING RACEWAY 6 UIN AA,OUTER RING LIPS 16 UIN AA,OD SURFACE OF OUTER RING 10 UIN AA,ALL SURFACES OF ROLLERS 2 UIN AA,HEAT STABILIZED FOR OPERATION AT M65 TO P350 DEG F,BEARING SPECIFIC DYNAMIC LOAD CAP. 7270 LB,OUTER RING CONTAINERS 6 SLOTS ON EACH
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
SURFACE FINISH: GROUND
TEST DATA DOCUMENT: 91547-E1004 STANDARD AND 91547-AP4903AA STANDARD
~1: FACE EQUALLY SPACED SO THAT THE SLOTS ON 1 FACE ARE DISPLACED BY 30 DEG FROM SLOTS ON THE OPPOSITE FACE,0.050 IN. MIN,0.055 IN. MAX W,0.050 IN. MIN,0.055 IN. MAX DEEP,ID RETAINER AND LIP OF OUTER RING CONCENTRIC WITHIN 0.0003 IN.,OD PERPENDICULAR W/OUTER
~2: RING FACES WITHIN 0.00003 IN. TIR,RETAINER ID AND OD CONCENTRIC WITHIN 0.003 IN. TIR,CENTER RING FACES PARALLEL WITHIN 0.0002 IN.,ROLLER BEARING SURFACE PARALLEL WITHIN 0.000025 AND PERPENDICULAR W/FACES WITHIN 0.00005 IN.
Related Searches:
441-116
BEARING,ROLLER,TRACK ROLLER
NSN, MFG P/N
3110000190401
NSN
3110-00-019-0401
MFG
RAYMOND CORPORATION THE
Description
BEARING,ROLLER,TRACK ROLLER
Related Searches:
2124502
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110000190574
NSN
3110-00-019-0574
MFG
DAIMLER CHRYSLER
Description
BEARING,ROLLER,NEEDLE
Related Searches:
P29008
BALL,BEARING
NSN, MFG P/N
3110000190594
NSN
3110-00-019-0594
MFG
CENTRAL SCIENTIFIC CO EDUCATIONAL
Description
MATERIAL: STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.2812 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR BALLS, GRADE 500
STYLE DESIGNATOR: 520 BALL
Related Searches:
56820G1
BEARING,PULLEY
NSN, MFG P/N
3110000190996
NSN
3110-00-019-0996
MFG
MOMENTUM TECHNOLOGIES INC
Description
BEARING,PULLEY
Related Searches:
1383097
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110000191470
NSN
3110-00-019-1470
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
APERTURE DIAMETER: 1.218 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 4
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
MATERIAL: LEAD ALLOY OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 2.625 INCHES NOMINAL
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.2187 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 3.000 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 2.041 INCHES MINIMUM AND 2.042 INCHES MAXIMUM
OVERALL THICKNESS: 0.156 INCHES NOMINAL
RAISED SURFACE HEIGHT: 0.0625 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
Related Searches:
1383097
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110000191470
NSN
3110-00-019-1470
MFG
JOY TECHNOLOGIES INC. DBA MINING JOY MACHINERY
Description
APERTURE DIAMETER: 1.218 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 4
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
MATERIAL: LEAD ALLOY OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 2.625 INCHES NOMINAL
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.2187 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 3.000 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 2.041 INCHES MINIMUM AND 2.042 INCHES MAXIMUM
OVERALL THICKNESS: 0.156 INCHES NOMINAL
RAISED SURFACE HEIGHT: 0.0625 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
Related Searches:
1383097
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110000191470
NSN
3110-00-019-1470
MFG
HAMILTON SUNDSTRAND CORPORATION USE CAGE CODE 55820 FOR CATALOGING.
Description
APERTURE DIAMETER: 1.218 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 4
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
MATERIAL: LEAD ALLOY OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 2.625 INCHES NOMINAL
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.2187 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 3.000 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 2.041 INCHES MINIMUM AND 2.042 INCHES MAXIMUM
OVERALL THICKNESS: 0.156 INCHES NOMINAL
RAISED SURFACE HEIGHT: 0.0625 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
Related Searches:
FF-B-171
BEARING,BALL,DUPLEX
NSN, MFG P/N
3110000192582
NSN
3110-00-019-2582
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
BEARING PRELOAD DESIGNATION: LIGHT
BORE DIAMETER: 55.0 MILLIMETERS NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING PLASTIC PHENOLIC RETAINER
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171
OVERALL OUTSIDE DIAMETER: 52.0 MILLIMETERS NOMINAL
OVERALL WIDTH: 30.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MOLDED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 35DEG CONTACT ANGLE
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 92B COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
SURFACE FINISH: GROUND
Related Searches:
Q30304DBL1A
BEARING,BALL,DUPLEX
NSN, MFG P/N
3110000192582
NSN
3110-00-019-2582
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING PRELOAD DESIGNATION: LIGHT
BORE DIAMETER: 55.0 MILLIMETERS NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING PLASTIC PHENOLIC RETAINER
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171
OVERALL OUTSIDE DIAMETER: 52.0 MILLIMETERS NOMINAL
OVERALL WIDTH: 30.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MOLDED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 35DEG CONTACT ANGLE
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 92B COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
SURFACE FINISH: GROUND
Related Searches:
Q30304DTL1A
BEARING,BALL,DUPLEX
NSN, MFG P/N
3110000192582
NSN
3110-00-019-2582
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING PRELOAD DESIGNATION: LIGHT
BORE DIAMETER: 55.0 MILLIMETERS NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING PLASTIC PHENOLIC RETAINER
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171
OVERALL OUTSIDE DIAMETER: 52.0 MILLIMETERS NOMINAL
OVERALL WIDTH: 30.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MOLDED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 35DEG CONTACT ANGLE
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 92B COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
SURFACE FINISH: GROUND
Related Searches:
37002-38
BEARING,BALL,THRUST
NSN, MFG P/N
3110000194862
NSN
3110-00-019-4862
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
BORE SMALLEST DIAMETER: 0.3390 INCHES NOMINAL
MATERIAL: STEEL OVERALL
OVERALL HEIGHT: 0.2830 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6630 INCHES NOMINAL
Related Searches:
6L3989
BEARING,BALL,THRUST
NSN, MFG P/N
3110000194862
NSN
3110-00-019-4862
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
BORE SMALLEST DIAMETER: 0.3390 INCHES NOMINAL
MATERIAL: STEEL OVERALL
OVERALL HEIGHT: 0.2830 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6630 INCHES NOMINAL
Related Searches:
10018960-002
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110000195210
NSN
3110-00-019-5210
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 3.9370 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 5.9055 INCHES NOMINAL
OVERALL WIDTH: 0.9449 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
9120NPPFS160
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110000195210
NSN
3110-00-019-5210
MFG
TIMKEN AEROSPACE INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 3.9370 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 5.9055 INCHES NOMINAL
OVERALL WIDTH: 0.9449 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3G11545-101
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110000195748
NSN
3110-00-019-5748
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
BOLT CIRCLE HOLE QUANTITY: 3
CORNER RADIUS: 2.220 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 3G11545-101
MANUFACTURERS CODE: 98897
MATERIAL: STEEL OVERALL
MOUNTING HOLE DIAMETER: 0.319 INCHES NOMINAL
OVERALL THICKNESS: 0.125 INCHES NOMINAL
THE MANUFACTURERS DATA: