My Quote Request
3110-00-155-9105
20 Products
309-1241-010
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1-4
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559103
NSN
3110-00-155-9103
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.2500 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6562 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
24166
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
POLYTECHNIC INSTITUTE OF NEW YORK UNIVERSITY
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
5318670
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
ORDNANCE CORPS
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-5/16
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW5-16
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
TC136
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
GWILLIAM COMPANY INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
TC136
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559104
NSN
3110-00-155-9104
MFG
GWILLIAM COMPANY INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3125 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
309-1241-010
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
309-1241-010
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
309-1241-010
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW-3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW3-8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW3-8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559105
NSN
3110-00-155-9105
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COPPER ALLOY RETAINER STEEL WASHER
OVERALL HEIGHT: 0.2500 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE