My Quote Request
3110-00-182-8142
20 Products
6157P60
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001828142
NSN
3110-00-182-8142
MFG
TELAIR INTERNATIONAL INCORPORATED DBA NORDISK AVIATION SERVICES
Description
BORE DIAMETER: 2.3115 INCHES MINIMUM AND 2.3135 INCHES MAXIMUM
INNER RING WIDTH: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 98889
MATERIAL: STEEL COMP E52100 OVERALL
MFR SOURCE CONTROLLING REFERENCE: 6157P60
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.8600 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM
SHIELD QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 196 SINGLE ROW INNER RING EXTENDED BOTH SIDES
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
Related Searches:
P200KDDFS50160
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828076
NSN
3110-00-182-8076
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 10.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA: 111CL3GR00 TYPE
OVERALL OUTSIDE DIAMETER: 30.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 9.0 MILLIMETERS NOMINAL
SHIELD QUANTITY: 2
SPECIAL FEATURES: ELECTRIC MOTOR QUALITY BEARING WITH NOISE TEST QUALITY
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
GR48SS
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110001828077
NSN
3110-00-182-8077
MFG
MCGILL MANUFACTURING COMPANY INC DBA EMERSON POWER TRANSMISSION
Description
ALIGNMENT TYPE: RIGID
BEARING SEAL TYPE: LIPS TURNED INWARDLY
BORE DIAMETER: 3.0000 INCHES NOMINAL
MATERIAL: STEEL OUTER RING STEEL ROLLER STEEL SEAL
OVERALL OUTSIDE DIAMETER: 3.7500 INCHES NOMINAL
OVERALL WIDTH: 1.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: DUMBBELL TYPE ROLLERS WITH RETAINING RING; OIL HOLE AND OIL GROOVE IN OD OF OUTER RACE; NEEDLE CONTAINING OUTER RACE,NO INNER RACE
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATOR: 424 NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
Related Searches:
GR48SS
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110001828077
NSN
3110-00-182-8077
MFG
MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING.
Description
ALIGNMENT TYPE: RIGID
BEARING SEAL TYPE: LIPS TURNED INWARDLY
BORE DIAMETER: 3.0000 INCHES NOMINAL
MATERIAL: STEEL OUTER RING STEEL ROLLER STEEL SEAL
OVERALL OUTSIDE DIAMETER: 3.7500 INCHES NOMINAL
OVERALL WIDTH: 1.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: DUMBBELL TYPE ROLLERS WITH RETAINING RING; OIL HOLE AND OIL GROOVE IN OD OF OUTER RACE; NEEDLE CONTAINING OUTER RACE,NO INNER RACE
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATOR: 424 NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
Related Searches:
2180573
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110001828078
NSN
3110-00-182-8078
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 3.7399 INCHES MINIMUM AND 3.7402 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0018 INCHES MINIMUM RADIAL AND 0.0023 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MATERIAL: STEEL INNER RING STEEL OUTER RING STEEL COMP 4340 RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING PWA-725,97497 MFR REF 1ST MATERIAL RESPONSE OUTER RING PWA-725,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 5.4331 INCHES MINIMUM AND 5.4336 INCHES MAXIMUM
OVERALL WIDTH: 1.2290 INCHES MINIMUM AND 1.2300 INCHES MAXIMUM
SPECIAL FEATURES: SILVER PLATE CAGE PER AMS 2412 0.001-0.002 THK ON LAND RIDING SURFACES AND ROLLER POCKETS. BAKE AT 475-500F FOR 2 HRS TO CHECK FOR BOND
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
2180631
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110001828078
NSN
3110-00-182-8078
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 3.7399 INCHES MINIMUM AND 3.7402 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0018 INCHES MINIMUM RADIAL AND 0.0023 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MATERIAL: STEEL INNER RING STEEL OUTER RING STEEL COMP 4340 RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING PWA-725,97497 MFR REF 1ST MATERIAL RESPONSE OUTER RING PWA-725,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 5.4331 INCHES MINIMUM AND 5.4336 INCHES MAXIMUM
OVERALL WIDTH: 1.2290 INCHES MINIMUM AND 1.2300 INCHES MAXIMUM
SPECIAL FEATURES: SILVER PLATE CAGE PER AMS 2412 0.001-0.002 THK ON LAND RIDING SURFACES AND ROLLER POCKETS. BAKE AT 475-500F FOR 2 HRS TO CHECK FOR BOND
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
654223
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110001828078
NSN
3110-00-182-8078
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 3.7399 INCHES MINIMUM AND 3.7402 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0018 INCHES MINIMUM RADIAL AND 0.0023 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MATERIAL: STEEL INNER RING STEEL OUTER RING STEEL COMP 4340 RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING PWA-725,97497 MFR REF 1ST MATERIAL RESPONSE OUTER RING PWA-725,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 5.4331 INCHES MINIMUM AND 5.4336 INCHES MAXIMUM
OVERALL WIDTH: 1.2290 INCHES MINIMUM AND 1.2300 INCHES MAXIMUM
SPECIAL FEATURES: SILVER PLATE CAGE PER AMS 2412 0.001-0.002 THK ON LAND RIDING SURFACES AND ROLLER POCKETS. BAKE AT 475-500F FOR 2 HRS TO CHECK FOR BOND
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
654224
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110001828078
NSN
3110-00-182-8078
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 3.7399 INCHES MINIMUM AND 3.7402 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0018 INCHES MINIMUM RADIAL AND 0.0023 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MATERIAL: STEEL INNER RING STEEL OUTER RING STEEL COMP 4340 RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING PWA-725,97497 MFR REF 1ST MATERIAL RESPONSE OUTER RING PWA-725,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 5.4331 INCHES MINIMUM AND 5.4336 INCHES MAXIMUM
OVERALL WIDTH: 1.2290 INCHES MINIMUM AND 1.2300 INCHES MAXIMUM
SPECIAL FEATURES: SILVER PLATE CAGE PER AMS 2412 0.001-0.002 THK ON LAND RIDING SURFACES AND ROLLER POCKETS. BAKE AT 475-500F FOR 2 HRS TO CHECK FOR BOND
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
654225
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110001828078
NSN
3110-00-182-8078
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 3.7399 INCHES MINIMUM AND 3.7402 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0018 INCHES MINIMUM RADIAL AND 0.0023 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MATERIAL: STEEL INNER RING STEEL OUTER RING STEEL COMP 4340 RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING PWA-725,97497 MFR REF 1ST MATERIAL RESPONSE OUTER RING PWA-725,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 5.4331 INCHES MINIMUM AND 5.4336 INCHES MAXIMUM
OVERALL WIDTH: 1.2290 INCHES MINIMUM AND 1.2300 INCHES MAXIMUM
SPECIAL FEATURES: SILVER PLATE CAGE PER AMS 2412 0.001-0.002 THK ON LAND RIDING SURFACES AND ROLLER POCKETS. BAKE AT 475-500F FOR 2 HRS TO CHECK FOR BOND
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
883579-1
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110001828079
NSN
3110-00-182-8079
MFG
HONEYWELL INTERNATIONAL INC . DBA HONEYWELL DIV AEROSPACE - TEMPE WEST WARNER ROAD
Description
PLATE,RETAINING,BEARING
Related Searches:
883579-1
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110001828079
NSN
3110-00-182-8079
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
PLATE,RETAINING,BEARING
Related Searches:
3017105
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
PRATT AND WHITNEY CANADA INC WHITNEY CANADA CIE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3017105
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
CANADIAN COMMERCIAL CORP ORATION DBA CORPORATION COMMERCIALE CANADIENNE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3032728
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
PRATT AND WHITNEY CANADA INC WHITNEY CANADA CIE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3032728
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
CANADIAN COMMERCIAL CORP ORATION DBA CORPORATION COMMERCIALE CANADIENNE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3100640-01
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
PRATT AND WHITNEY CANADA INC WHITNEY CANADA CIE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3100640-01
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
CANADIAN COMMERCIAL CORP ORATION DBA CORPORATION COMMERCIALE CANADIENNE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3101641-01
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
PRATT AND WHITNEY CANADA INC WHITNEY CANADA CIE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3101641-01
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001828131
NSN
3110-00-182-8131
MFG
CANADIAN COMMERCIAL CORP ORATION DBA CORPORATION COMMERCIALE CANADIENNE
Description
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
INNER RING WIDTH: 0.7927 INCHES MINIMUM AND 0.8027 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0012 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL BALL STEEL INNER RING COPPER ALLOY RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE BALL CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE INNER RING CPW 52,FSCM 00198 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
OUTER RING WIDTH: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM
OVERALL WIDTH: ANY ACCEPTABLE
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: EXTEND PORTION OF INNER RING EXTERNALLY GROOVED; MAGNETIC PARTICLE INSPECTION
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 22C COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
B546DD
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001828142
NSN
3110-00-182-8142
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 2.3115 INCHES MINIMUM AND 2.3135 INCHES MAXIMUM
INNER RING WIDTH: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 98889
MATERIAL: STEEL COMP E52100 OVERALL
MFR SOURCE CONTROLLING REFERENCE: 6157P60
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 2.8600 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM
SHIELD QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 196 SINGLE ROW INNER RING EXTENDED BOTH SIDES
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED