My Quote Request
3110-00-190-9385
20 Products
525-150-001
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
MOMENTUM TECHNOLOGIES INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
53540D
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001909364
NSN
3110-00-190-9364
MFG
INTERNATIONAL HARVESTER CO AGRICULTURAL EQUIPMENT DIV
Description
BORE DIAMETER: 100.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 24.00 MILLIMETERS NOMINAL
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-7421 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OUTER RING WIDTH: 20.00 MILLIMETERS NOMINAL
OVERALL OUTSIDE DIAMETER: 150.00 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STYLE DESIGNATOR: 12A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
K7879993
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001909364
NSN
3110-00-190-9364
MFG
GENERAL ELECTRIC CO
Description
BORE DIAMETER: 100.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 24.00 MILLIMETERS NOMINAL
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-7421 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OUTER RING WIDTH: 20.00 MILLIMETERS NOMINAL
OVERALL OUTSIDE DIAMETER: 150.00 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STYLE DESIGNATOR: 12A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
ST511
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001909364
NSN
3110-00-190-9364
MFG
INTERNATIONAL HARVESTER CO AGRICULTURAL EQUIPMENT DIV
Description
BORE DIAMETER: 100.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 24.00 MILLIMETERS NOMINAL
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-7421 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OUTER RING WIDTH: 20.00 MILLIMETERS NOMINAL
OVERALL OUTSIDE DIAMETER: 150.00 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STYLE DESIGNATOR: 12A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
3B3985
RING,BEARING,INNER
NSN, MFG P/N
3110001909370
NSN
3110-00-190-9370
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
BORE DIAMETER: 1.3780 INCHES NOMINAL
BORE SHAPE: STRAIGHT
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.8440 INCHES NOMINAL
OVERALL WIDTH: 1.0000 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
STYLE DESIGNATOR: 494 INNER RING, ROLLER, CYLINDRICAL
SURFACE FINISH: GROUND
Related Searches:
AB1307
RING,BEARING,INNER
NSN, MFG P/N
3110001909370
NSN
3110-00-190-9370
MFG
GENERAL MOTORS CORP
Description
BORE DIAMETER: 1.3780 INCHES NOMINAL
BORE SHAPE: STRAIGHT
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.8440 INCHES NOMINAL
OVERALL WIDTH: 1.0000 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
STYLE DESIGNATOR: 494 INNER RING, ROLLER, CYLINDRICAL
SURFACE FINISH: GROUND
Related Searches:
AB1307
RING,BEARING,INNER
NSN, MFG P/N
3110001909370
NSN
3110-00-190-9370
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BORE DIAMETER: 1.3780 INCHES NOMINAL
BORE SHAPE: STRAIGHT
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.8440 INCHES NOMINAL
OVERALL WIDTH: 1.0000 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
STYLE DESIGNATOR: 494 INNER RING, ROLLER, CYLINDRICAL
SURFACE FINISH: GROUND
Related Searches:
538112
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
600-7558-001
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
APPLIED BIOSYSTEMS LLC DIV APPLIED BIOSYSTEMS
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
AS27647
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
AS27647-4AL
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
TIMKEN EUROPA SARL
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
TIMKEN AEROSPACE INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2FS160
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
RBC AIRCRAFT PRODUCTS INC.
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2FS160
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
TIMKEN AEROSPACE INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2MILG3278
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
TIMKEN AEROSPACE INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2SD610
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
NEW HAMPSHIRE BALL BEARINGS INC . DIV HITECH DIVISION
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
DW4K2ZZ
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
GB520M4A
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110001909385
NSN
3110-00-190-9385
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.5625 INCHES NOMINAL
LOAD DIRECTION: ANGULAR
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 204 DOUBLE ROW
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES