My Quote Request
3110-00-198-1535
20 Products
102668-324
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001981535
NSN
3110-00-198-1535
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 58536
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AA59584-105JAPT
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 15.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
N1109-1-35
BEARING,ROLLER,TAPERED
NSN, MFG P/N
3110001981486
NSN
3110-00-198-1486
MFG
CONTROL FLOW INC. DBA WESTECH HEAVY MACHINERY DIVISION DIV WESTECH HEAVY MACHINERY DIVISION
Description
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL
BORE DIAMETER: 1.1250 INCHES NOMINAL
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL
CONE WIDTH: 0.9550 INCHES NOMINAL
CUP WIDTH: 0.6875 INCHES NOMINAL
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-187
NONDEFINITIVE SPEC/STD DATA: 753 TYPE
OVERALL OUTSIDE DIAMETER: 2.8593 INCHES NOMINAL
OVERALL WIDTH: 0.9688 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STANDOUT WIDTH: 0.2813 INCHES NOMINAL
STYLE DESIGNATOR: 354 STRAIGHT BORE, STEEP ANGLE
Related Searches:
N1109-1-35
BEARING,ROLLER,TAPERED
NSN, MFG P/N
3110001981486
NSN
3110-00-198-1486
MFG
CONTROL FLOW INC. DBA WESTECH HEAVY MACHINERY DIV DIV WESTECH HEAVY MACHINER DIV
Description
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL
BORE DIAMETER: 1.1250 INCHES NOMINAL
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL
CONE WIDTH: 0.9550 INCHES NOMINAL
CUP WIDTH: 0.6875 INCHES NOMINAL
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-187
NONDEFINITIVE SPEC/STD DATA: 753 TYPE
OVERALL OUTSIDE DIAMETER: 2.8593 INCHES NOMINAL
OVERALL WIDTH: 0.9688 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STANDOUT WIDTH: 0.2813 INCHES NOMINAL
STYLE DESIGNATOR: 354 STRAIGHT BORE, STEEP ANGLE
Related Searches:
2135-1
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
2412T2
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
DIAMOND REO TRUCK CO
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
30-76-2
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
DANA CORP SPICER TRANSMISSION DIV
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
3110001981502
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
550148
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
DANA CORP SPICER TRANSMISSION DIV
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
5863A
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
7743X
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
DANA CORP SPICER TRANSMISSION DIV
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
914312
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
SASCO INC CANADIAN DIV
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
A-3419
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
A-3419-2
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
DP7743X
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
DANA CORP SPICER AXLE DIV
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EX270
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
F5153
BEARING,BALL,THRUST
NSN, MFG P/N
3110001981502
NSN
3110-00-198-1502
MFG
CLEVELAND TRENCHER CO INC
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: ANY ACCEPTABLE
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL BAND STEEL RETAINER COPPER ALLOY OR STEEL WASHER
OVERALL HEIGHT: 0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: WASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
STYLE DESIGNATOR: 234 CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
102668-329
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001981534
NSN
3110-00-198-1534
MFG
NAVAL SEA SYSTEMS COMMAND
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 12.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
102668-329
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001981534
NSN
3110-00-198-1534
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 12.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
MM203
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001981534
NSN
3110-00-198-1534
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 12.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
MM203K
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110001981534
NSN
3110-00-198-1534
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 12.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND