My Quote Request
3110-00-236-0056
20 Products
10175206
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002360056
NSN
3110-00-236-0056
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
BORE DIAMETER: 2.4994 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MINIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING PLASTIC PHENOLIC RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL OUTSIDE DIAMETER: 3.0000 INCHES NOMINAL
OVERALL WIDTH: 0.2500 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
03-6010-018
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002354555
NSN
3110-00-235-4555
MFG
LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
Description
BEARING SEAL TYPE: LABYRINTH
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: 05-648296,31435 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 31435
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MFR SOURCE CONTROLLING REFERENCE: 03-6010-018
OVERALL OUTSIDE DIAMETER: 1.8502 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM
OVERALL WIDTH: 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: LUBRICATED 50 PCT PORM 10 PCT FULL
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
03-6010-18
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002354555
NSN
3110-00-235-4555
MFG
LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
Description
BEARING SEAL TYPE: LABYRINTH
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: 05-648296,31435 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 31435
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MFR SOURCE CONTROLLING REFERENCE: 03-6010-018
OVERALL OUTSIDE DIAMETER: 1.8502 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM
OVERALL WIDTH: 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: LUBRICATED 50 PCT PORM 10 PCT FULL
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
07-111253
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002354555
NSN
3110-00-235-4555
MFG
LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
Description
BEARING SEAL TYPE: LABYRINTH
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: 05-648296,31435 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 31435
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MFR SOURCE CONTROLLING REFERENCE: 03-6010-018
OVERALL OUTSIDE DIAMETER: 1.8502 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM
OVERALL WIDTH: 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: LUBRICATED 50 PCT PORM 10 PCT FULL
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
204SRRC111253
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002354555
NSN
3110-00-235-4555
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
BEARING SEAL TYPE: LABYRINTH
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: 05-648296,31435 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 31435
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MFR SOURCE CONTROLLING REFERENCE: 03-6010-018
OVERALL OUTSIDE DIAMETER: 1.8502 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM
OVERALL WIDTH: 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: LUBRICATED 50 PCT PORM 10 PCT FULL
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
S3504HH111253
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002354555
NSN
3110-00-235-4555
MFG
FAG BEARINGS CORPORATION
Description
BEARING SEAL TYPE: LABYRINTH
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: 05-648296,31435 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 31435
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MFR SOURCE CONTROLLING REFERENCE: 03-6010-018
OVERALL OUTSIDE DIAMETER: 1.8502 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM
OVERALL WIDTH: 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: LUBRICATED 50 PCT PORM 10 PCT FULL
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
W204PP111253
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002354555
NSN
3110-00-235-4555
MFG
TIMKEN AEROSPACE INC
Description
BEARING SEAL TYPE: LABYRINTH
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: 05-648296,31435 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 31435
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MFR SOURCE CONTROLLING REFERENCE: 03-6010-018
OVERALL OUTSIDE DIAMETER: 1.8502 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM
OVERALL WIDTH: 0.8075 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: LUBRICATED 50 PCT PORM 10 PCT FULL
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
106940
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110002355663
NSN
3110-00-235-5663
MFG
ASTRONAUTICS CORPORATION OF AMERICA
Description
DESIGN CONTROL REFERENCE: 106940
MANUFACTURERS CODE: 10138
MATERIAL: ALUMINUM ALLOY OVERALL
THE MANUFACTURERS DATA:
Related Searches:
10237512-2
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002357280
NSN
3110-00-235-7280
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
BORE DIAMETER: 120.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 180.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 28.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
773L24T1CJ
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002357280
NSN
3110-00-235-7280
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BORE DIAMETER: 120.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 180.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 28.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
43542
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110002357492
NSN
3110-00-235-7492
MFG
FLIGHTLINE ELECTRONICS INC. DBA ULTRA ELEC FLIGHTLINE SYSTEMS DIV ULTRA ELECTRONICS FLIGHTLINE SYSTEMS
Description
APERTURE DIAMETER: 0.598 INCHES MINIMUM AND 0.602 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 3
CROSS-SECTIONAL SHAPE STYLE: C1A FLAT WITH APERTURE
DESIGN CONTROL REFERENCE: 43542
MANUFACTURERS CODE: 50027
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.200 INCHES NOMINAL
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 1.380 INCHES NOMINAL
OVERALL THICKNESS: 0.593 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
44082
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110002357515
NSN
3110-00-235-7515
MFG
FLIGHTLINE ELECTRONICS INC. DBA ULTRA ELEC FLIGHTLINE SYSTEMS DIV ULTRA ELECTRONICS FLIGHTLINE SYSTEMS
Description
APERTURE DIAMETER: 0.343 INCHES NOMINAL
BOLT CIRCLE HOLE QUANTITY: 3
DESIGN CONTROL REFERENCE: 44082
MANUFACTURERS CODE: 50027
MATERIAL: STEEL COMP 630 OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 0.688 INCHES NOMINAL
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.128 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 1.060 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
30007-1041
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110002358112
NSN
3110-00-235-8112
MFG
LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
Description
PLATE,RETAINING,BEARING
Related Searches:
512046
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002358128
NSN
3110-00-235-8128
MFG
EASTMAN KODAK COMPANY DBA KODAK
Description
DESIGN CONTROL REFERENCE: 512046
MANUFACTURERS CODE: 19139
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
Related Searches:
4312-093LA
RING,BEARING,OUTER
NSN, MFG P/N
3110002358144
NSN
3110-00-235-8144
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
DESIGN CONTROL REFERENCE: 4312-093LA
MANUFACTURERS CODE: 99167
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
Related Searches:
113961
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110002358174
NSN
3110-00-235-8174
MFG
HONEYWELL INTERNATIONAL INC . DBA HONEYWELL DIV AEROSPACE - TEMPE WEST WARNER ROAD
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 59364
MATERIAL: STEEL OUTER RING STEEL COMP 440C ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 113961
OVERALL OUTSIDE DIAMETER: 0.4950 INCHES MINIMUM AND 0.4953 INCHES MAXIMUM
OVERALL WIDTH: 0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 410 NON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISH: GROUND
SURFACE TREATMENT: OXIDE OUTER RING
Related Searches:
113961
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110002358174
NSN
3110-00-235-8174
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 59364
MATERIAL: STEEL OUTER RING STEEL COMP 440C ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 113961
OVERALL OUTSIDE DIAMETER: 0.4950 INCHES MINIMUM AND 0.4953 INCHES MAXIMUM
OVERALL WIDTH: 0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 410 NON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISH: GROUND
SURFACE TREATMENT: OXIDE OUTER RING
Related Searches:
113961
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110002358174
NSN
3110-00-235-8174
MFG
BETTS INDUSTRIES INC
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 59364
MATERIAL: STEEL OUTER RING STEEL COMP 440C ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 113961
OVERALL OUTSIDE DIAMETER: 0.4950 INCHES MINIMUM AND 0.4953 INCHES MAXIMUM
OVERALL WIDTH: 0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 410 NON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISH: GROUND
SURFACE TREATMENT: OXIDE OUTER RING
Related Searches:
GB55AS
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110002358174
NSN
3110-00-235-8174
MFG
TIMKEN AEROSPACE INC DBA TORRINGTON PRODUCT
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM
LUBRICATION MATERIAL: LUBRICANT
MANUFACTURERS CODE: 59364
MATERIAL: STEEL OUTER RING STEEL COMP 440C ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MFR SOURCE CONTROLLING REFERENCE: 113961
OVERALL OUTSIDE DIAMETER: 0.4950 INCHES MINIMUM AND 0.4953 INCHES MAXIMUM
OVERALL WIDTH: 0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 410 NON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISH: GROUND
SURFACE TREATMENT: OXIDE OUTER RING
Related Searches:
10175206
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110002360056
NSN
3110-00-236-0056
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
BORE DIAMETER: 2.4994 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MINIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING PLASTIC PHENOLIC RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL OUTSIDE DIAMETER: 3.0000 INCHES NOMINAL
OVERALL WIDTH: 0.2500 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND