My Quote Request
3110-00-516-2404
20 Products
607552
RETAINER,ROLLER,BEARING
NSN, MFG P/N
3110005162404
NSN
3110-00-516-2404
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
RETAINER,ROLLER,BEARING
Related Searches:
6-38359-5
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162411
NSN
3110-00-516-2411
MFG
THE BOEING COMPANY DBA BOEING
Description
BEARING,ROLLER,ROD END
Related Searches:
9-47388
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162415
NSN
3110-00-516-2415
MFG
TECT AEROSPACE INC DBA TECT AEROSPACE SOUTHWEST DIV TECT AEROSPACE SOUTHWEST
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
INNER RING WIDTH: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 3.0800 INCHES NOMINAL
MATERIAL: STEEL ALIGNMENT RING STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL ROLLER STEEL COMP E4340 SHAFT
NOMINAL THREAD SIZE: 0.875 INCHES
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
OVERALL LENGTH: 4.5200 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.8800 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.8750 INCHES NOMINAL
SHANK STYLE: 667 EXTERNALLY THREADED W/SLOT
SHANK THREAD LENGTH: 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM
STYLE DESIGNATOR: 478 NEEDLE ROLLER
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-47388
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162415
NSN
3110-00-516-2415
MFG
CM MANUFACTURING INC.
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
INNER RING WIDTH: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 3.0800 INCHES NOMINAL
MATERIAL: STEEL ALIGNMENT RING STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL ROLLER STEEL COMP E4340 SHAFT
NOMINAL THREAD SIZE: 0.875 INCHES
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
OVERALL LENGTH: 4.5200 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.8800 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.8750 INCHES NOMINAL
SHANK STYLE: 667 EXTERNALLY THREADED W/SLOT
SHANK THREAD LENGTH: 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM
STYLE DESIGNATOR: 478 NEEDLE ROLLER
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-47388
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162415
NSN
3110-00-516-2415
MFG
HEROUX INC LONGUEUIL DIV LONGUEUIL DIV
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
INNER RING WIDTH: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 3.0800 INCHES NOMINAL
MATERIAL: STEEL ALIGNMENT RING STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL ROLLER STEEL COMP E4340 SHAFT
NOMINAL THREAD SIZE: 0.875 INCHES
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
OVERALL LENGTH: 4.5200 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.8800 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.8750 INCHES NOMINAL
SHANK STYLE: 667 EXTERNALLY THREADED W/SLOT
SHANK THREAD LENGTH: 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM
STYLE DESIGNATOR: 478 NEEDLE ROLLER
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-47388
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162415
NSN
3110-00-516-2415
MFG
CANADIAN COMMERCIAL CORP ORATION DBA CORPORATION COMMERCIALE CANADIENNE
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
INNER RING WIDTH: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 3.0800 INCHES NOMINAL
MATERIAL: STEEL ALIGNMENT RING STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL ROLLER STEEL COMP E4340 SHAFT
NOMINAL THREAD SIZE: 0.875 INCHES
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
OVERALL LENGTH: 4.5200 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.8800 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.8750 INCHES NOMINAL
SHANK STYLE: 667 EXTERNALLY THREADED W/SLOT
SHANK THREAD LENGTH: 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM
STYLE DESIGNATOR: 478 NEEDLE ROLLER
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-47388
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162415
NSN
3110-00-516-2415
MFG
ALTA PRECISION INC
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
INNER RING WIDTH: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 3.0800 INCHES NOMINAL
MATERIAL: STEEL ALIGNMENT RING STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL ROLLER STEEL COMP E4340 SHAFT
NOMINAL THREAD SIZE: 0.875 INCHES
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
OVERALL LENGTH: 4.5200 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.8800 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.8750 INCHES NOMINAL
SHANK STYLE: 667 EXTERNALLY THREADED W/SLOT
SHANK THREAD LENGTH: 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM
STYLE DESIGNATOR: 478 NEEDLE ROLLER
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-47388
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162415
NSN
3110-00-516-2415
MFG
THE BOEING COMPANY DBA BOEING
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
INNER RING WIDTH: 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 3.0800 INCHES NOMINAL
MATERIAL: STEEL ALIGNMENT RING STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL ROLLER STEEL COMP E4340 SHAFT
NOMINAL THREAD SIZE: 0.875 INCHES
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
OVERALL LENGTH: 4.5200 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.8800 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.8750 INCHES NOMINAL
SHANK STYLE: 667 EXTERNALLY THREADED W/SLOT
SHANK THREAD LENGTH: 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM
STYLE DESIGNATOR: 478 NEEDLE ROLLER
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-61102
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162416
NSN
3110-00-516-2416
MFG
THE BOEING COMPANY DBA BOEING
Description
BEARING,ROLLER,ROD END
Related Searches:
MS21151-63
BEARING,BALL,ROD END
NSN, MFG P/N
3110005162556
NSN
3110-00-516-2556
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS21151-63
INNER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 96906
MATERIAL: STEEL BALL STEEL INNER RING STEEL OPPOSITE SHIELD SIDE STEEL OUTER RING RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.1930 INCHES MINIMUM AND 2.2130 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: ANY ACCEPTABLE
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.2500 INCHES NOMINAL
SHANK STYLE: 651 EXTERNALLY THREADED
SHANK THREAD LENGTH: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: KEYWAY ON SHANK PARALLEL TO AXIS 1.0000 IN. LG,0.0620 IN. MIN,0.0670 IN. MAX W,0.0490 IN. MIN,0.0540 IN. MAX DEEP
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
RAP3MS4-2
BEARING,BALL,ROD END
NSN, MFG P/N
3110005162556
NSN
3110-00-516-2556
MFG
TIMKEN AEROSPACE INC
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS21151-63
INNER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 96906
MATERIAL: STEEL BALL STEEL INNER RING STEEL OPPOSITE SHIELD SIDE STEEL OUTER RING RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.1930 INCHES MINIMUM AND 2.2130 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: ANY ACCEPTABLE
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.2500 INCHES NOMINAL
SHANK STYLE: 651 EXTERNALLY THREADED
SHANK THREAD LENGTH: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: KEYWAY ON SHANK PARALLEL TO AXIS 1.0000 IN. LG,0.0620 IN. MIN,0.0670 IN. MAX W,0.0490 IN. MIN,0.0540 IN. MAX DEEP
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
S1565-61357
BEARING,BALL,ROD END
NSN, MFG P/N
3110005162556
NSN
3110-00-516-2556
MFG
SIKORSKY AIRCRAFT CORPORATION
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS21151-63
INNER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 96906
MATERIAL: STEEL BALL STEEL INNER RING STEEL OPPOSITE SHIELD SIDE STEEL OUTER RING RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.1930 INCHES MINIMUM AND 2.2130 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: ANY ACCEPTABLE
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.2500 INCHES NOMINAL
SHANK STYLE: 651 EXTERNALLY THREADED
SHANK THREAD LENGTH: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: KEYWAY ON SHANK PARALLEL TO AXIS 1.0000 IN. LG,0.0620 IN. MIN,0.0670 IN. MAX W,0.0490 IN. MIN,0.0540 IN. MAX DEEP
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
272-4162076
BEARING,BALL,ROD END
NSN, MFG P/N
3110005162573
NSN
3110-00-516-2573
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.1900 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 272-4162076
INNER RING WIDTH: 0.2450 INCHES NOMINAL
LENGTH FROM BORE CENTER TO SHANK END: 3.9063 INCHES NOMINAL
MANUFACTURERS CODE: 38597
MATERIAL: ALUMINUM ROD END BODY STEEL CORROSION RESISTING ROLLER
OVERALL LENGTH: 4.3438 INCHES NOMINAL
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SHANK DIAMETER: 0.5310 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
9-67145
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162705
NSN
3110-00-516-2705
MFG
MILLING PRECISION TOOL CORPORATION
Description
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
INNER RING WIDTH: 1.1820 INCHES MINIMUM AND 1.1870 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 2.6500 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
MATERIAL: STEEL ROD END BODY
NOMINAL THREAD SIZE: 0.750 INCHES
OVERALL LENGTH: 3.7000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1000 INCHES NOMINAL
SEAL QUANTITY: 2
SHANK DIAMETER: 0.7500 INCHES NOMINAL
SHANK THREAD LENGTH: 1.5000 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OUTER RING CADMIUM ROD END BODY
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-67145
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162705
NSN
3110-00-516-2705
MFG
PRECI-MANUFACTURING INCORPORATED
Description
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
INNER RING WIDTH: 1.1820 INCHES MINIMUM AND 1.1870 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 2.6500 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
MATERIAL: STEEL ROD END BODY
NOMINAL THREAD SIZE: 0.750 INCHES
OVERALL LENGTH: 3.7000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1000 INCHES NOMINAL
SEAL QUANTITY: 2
SHANK DIAMETER: 0.7500 INCHES NOMINAL
SHANK THREAD LENGTH: 1.5000 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OUTER RING CADMIUM ROD END BODY
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-67145
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162705
NSN
3110-00-516-2705
MFG
TECT AEROSPACE INC DBA TECT AEROSPACE SOUTHWEST DIV TECT AEROSPACE SOUTHWEST
Description
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
INNER RING WIDTH: 1.1820 INCHES MINIMUM AND 1.1870 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 2.6500 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
MATERIAL: STEEL ROD END BODY
NOMINAL THREAD SIZE: 0.750 INCHES
OVERALL LENGTH: 3.7000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1000 INCHES NOMINAL
SEAL QUANTITY: 2
SHANK DIAMETER: 0.7500 INCHES NOMINAL
SHANK THREAD LENGTH: 1.5000 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OUTER RING CADMIUM ROD END BODY
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
Related Searches:
9-67145
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110005162705
NSN
3110-00-516-2705
MFG
THE BOEING COMPANY DBA BOEING
Description
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
INNER RING WIDTH: 1.1820 INCHES MINIMUM AND 1.1870 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 2.6500 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
MATERIAL: STEEL ROD END BODY
NOMINAL THREAD SIZE: 0.750 INCHES
OVERALL LENGTH: 3.7000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1000 INCHES NOMINAL
SEAL QUANTITY: 2
SHANK DIAMETER: 0.7500 INCHES NOMINAL
SHANK THREAD LENGTH: 1.5000 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OUTER RING CADMIUM ROD END BODY
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
Related Searches:
SS993L02
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005165121
NSN
3110-00-516-5121
MFG
GENERAL MOTORS CORP
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL CORROSION RESISTING BALL STEEL CORROSION RESISTING INNER RING STEEL CORROSION RESISTING OUTER RING STEEL CORROSION RESISTING RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 32.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 9.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
SS993L02
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005165121
NSN
3110-00-516-5121
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL CORROSION RESISTING BALL STEEL CORROSION RESISTING INNER RING STEEL CORROSION RESISTING OUTER RING STEEL CORROSION RESISTING RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 32.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 9.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
A7HMILG23827
BEARING,ROLLER,AIRFRAME
NSN, MFG P/N
3110005165134
NSN
3110-00-516-5134
MFG
REXNORD INDUSTRIES LLC DIV BEARING OPERATION
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.4375 INCHES NOMINAL
INNER RING WIDTH: 1.5000 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL INNER RING STEEL LOCKING COLLAR STEEL OUTER RING STEEL RETAINER STEEL ROLLER GLASS FIBER SEAL STEEL SLEEVE
OUTER RING WIDTH: 1.0000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.0000 INCHES NOMINAL
RETAINER FABRICATION METHOD: CAST
SEAL QUANTITY: 2
SPECIAL FEATURES: 10 DEG SELF-ALIGNMENT IN EITHER DIRECTION; LUBRICANT HOLE AND GROOVE IN OD OF OUTER RING; HEAT TREATED SLEVE AND COLLARS ON OD OF INNER RING
STYLE DESIGNATOR: 276 CONCAVE ROLLERS, DOUBLE CLOSURE, SELF ALIGNING
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES