My Quote Request
3110-00-586-8305
20 Products
104579
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
104579
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
KELSEY-HAYES CO FRENCH AND HECHT DIV
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
WD38ZB3224
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005859698
NSN
3110-00-585-9698
MFG
GENERAL MOTORS CORP
Description
BORE DIAMETER: 0.3150 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0004 INCHES MINIMUM RADIAL AND 0.0006 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 0.8661 INCHES NOMINAL
OVERALL WIDTH: 0.2756 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: STABILIZED FOR HIGH TEMPERATURE OPERATION
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
203SSTX7K2
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005860827
NSN
3110-00-586-0827
MFG
BARDEN CORPORATION THE DIV BARDEN PRECISION BEARINGS DIVISION
Description
BORE DIAMETER: 0.6700 INCHES MINIMUM AND 0.6702 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.5739 INCHES MINIMUM AND 1.5742 INCHES MAXIMUM
OVERALL WIDTH: 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: INNER AND OUTER RING RUNOUT 0.0002 IN.
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
77503FZB5005E
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005860827
NSN
3110-00-586-0827
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BORE DIAMETER: 0.6700 INCHES MINIMUM AND 0.6702 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.5739 INCHES MINIMUM AND 1.5742 INCHES MAXIMUM
OVERALL WIDTH: 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: INNER AND OUTER RING RUNOUT 0.0002 IN.
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
77503FZB5005E
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005860827
NSN
3110-00-586-0827
MFG
GENERAL MOTORS CORP
Description
BORE DIAMETER: 0.6700 INCHES MINIMUM AND 0.6702 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.5739 INCHES MINIMUM AND 1.5742 INCHES MAXIMUM
OVERALL WIDTH: 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: INNER AND OUTER RING RUNOUT 0.0002 IN.
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
887264
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005860827
NSN
3110-00-586-0827
MFG
L-3 COMMUNICATIONS CORPORATION DBA L3 COMMUNICATION AVIATION RECORDERS DIVISION DIV L3 COMMUNICATIONS CORPORATION AVIATION RECORDERS DIVISION
Description
BORE DIAMETER: 0.6700 INCHES MINIMUM AND 0.6702 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.5739 INCHES MINIMUM AND 1.5742 INCHES MAXIMUM
OVERALL WIDTH: 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: INNER AND OUTER RING RUNOUT 0.0002 IN.
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
2546175
BEARING,BALL,ROD END
NSN, MFG P/N
3110005861205
NSN
3110-00-586-1205
MFG
BOEING COMPANY THE DBA BOEING
Description
ALIGNMENT TYPE: SELF-ALIGNING
DESIGN CONTROL REFERENCE: 2546175
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 76301
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL COMP 4140 ROD END BODY STEEL SHIELD
NOMINAL THREAD SIZE: 0.375 INCHES
SELF-ALIGNMENT LOCATION: INTERNAL
SHIELD QUANTITY: 2
SPECIAL FEATURES: SELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM SHIELD
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
2546175
BEARING,BALL,ROD END
NSN, MFG P/N
3110005861205
NSN
3110-00-586-1205
MFG
BOEING COMPANY THE DBA BOEING DIV DEFENSE SPACE & SECURITY
Description
ALIGNMENT TYPE: SELF-ALIGNING
DESIGN CONTROL REFERENCE: 2546175
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 76301
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL COMP 4140 ROD END BODY STEEL SHIELD
NOMINAL THREAD SIZE: 0.375 INCHES
SELF-ALIGNMENT LOCATION: INTERNAL
SHIELD QUANTITY: 2
SPECIAL FEATURES: SELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM SHIELD
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
2546175
BEARING,BALL,ROD END
NSN, MFG P/N
3110005861205
NSN
3110-00-586-1205
MFG
BOEING COMPANY THE DBA BOEING DIV DEFENSE SPACE & SECURITY - GLOBAL MOBILITY SYSTEMS
Description
ALIGNMENT TYPE: SELF-ALIGNING
DESIGN CONTROL REFERENCE: 2546175
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 76301
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL COMP 4140 ROD END BODY STEEL SHIELD
NOMINAL THREAD SIZE: 0.375 INCHES
SELF-ALIGNMENT LOCATION: INTERNAL
SHIELD QUANTITY: 2
SPECIAL FEATURES: SELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM SHIELD
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3E10
BEARING
NSN, MFG P/N
3110005864639
NSN
3110-00-586-4639
MFG
CHICAGO PNEUMATIC TOOL CO
Description
BEARING
Related Searches:
96658
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005868299
NSN
3110-00-586-8299
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
BORE DIAMETER: 6.0930 INCHES MINIMUM AND 6.0940 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 0.4990 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 73030
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: 96658
OUTER RING WIDTH: 0.4320 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 7.1247 INCHES MINIMUM AND 7.1257 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: CROSS-CORNER TOLERANCE W-END PLAY REMOVED 0.5010 IN. MAX TO 0.4910 IN. MIN UNDER A 15 LB LOAD
STYLE DESIGNATOR: 26B LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
96658
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005868299
NSN
3110-00-586-8299
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 6.0930 INCHES MINIMUM AND 6.0940 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 0.4990 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 73030
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: 96658
OUTER RING WIDTH: 0.4320 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 7.1247 INCHES MINIMUM AND 7.1257 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: CROSS-CORNER TOLERANCE W-END PLAY REMOVED 0.5010 IN. MAX TO 0.4910 IN. MIN UNDER A 15 LB LOAD
STYLE DESIGNATOR: 26B LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
96658CFS179
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110005868299
NSN
3110-00-586-8299
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 6.0930 INCHES MINIMUM AND 6.0940 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 0.4990 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 73030
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: 96658
OUTER RING WIDTH: 0.4320 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 7.1247 INCHES MINIMUM AND 7.1257 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: CROSS-CORNER TOLERANCE W-END PLAY REMOVED 0.5010 IN. MAX TO 0.4910 IN. MIN UNDER A 15 LB LOAD
STYLE DESIGNATOR: 26B LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
10A7051
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
10A7051
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT INC
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
1201
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
1201
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
NEW HOLLAND N.V.NC.
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
1205043
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
1205043
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
LMC OPERATING CORP
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
1304851
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
1304851
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
SEARS ROEBUCK AND CO. DBA SEARS DIV SEARS COMMERCIAL
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
13048510
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
13048510
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
TITAN INTERNATIONAL INC.
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
135657
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
135657
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
NACCO MATERIALS HANDLING GROUP INC
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
Related Searches:
135657
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
135657
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110005868305
NSN
3110-00-586-8305
MFG
NACCO MATERIALS HANDLING GROUP INC DBA HYSTER
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON MAXXPRO CAT I AND 33 OTHER WEAPON SYSTEMS
MATERIAL: STEEL OVERALL
SPECIAL FEATURES: DUTY CLASS LM SERIES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2