My Quote Request
3110-00-678-0411
20 Products
5666683
RING,BEARING,OUTER
NSN, MFG P/N
3110006780411
NSN
3110-00-678-0411
MFG
GENERAL MOTORS CORP
Description
BORE DIAMETER: 1.1170 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
OVERALL WIDTH: 0.3010 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM
SPECIAL FEATURES: RACEWAY FOR 9/32 IN. DIA BALLS
STYLE DESIGNATOR: 502 OUTER RING, BALL
SURFACE FINISH: GROUND
Related Searches:
736838
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110006777664
NSN
3110-00-677-7664
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 20.0 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL
LOCATING FEATURE: ONE DIRECTION
MATERIAL: STEEL INNER RING STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA-724,97497 MFR REF 1ST MATERIAL RESPONSE INNER RING PWA-724,97497 MFR REF 2ND MATERIAL RESPONSE OUTER RING PWA-724,97497 MFR REF 3RD MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 47.0 MILLIMETERS NOMINAL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252E SINGLE ROW, ONE-DIRECTION LOCATING, TWO LIP INNER RING, ONE LIP OUTER RING, SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
78A22
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006779661
NSN
3110-00-677-9661
MFG
TELEX COMMUNICATIONS INC SUB OF TELEX CORP
Description
DESIGN CONTROL REFERENCE: 78A22
III END ITEM IDENTIFICATION: PT-6(V)R-R;DCX
MANUFACTURERS CODE: 28856
THE MANUFACTURERS DATA:
Related Searches:
492850-310
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780393
NSN
3110-00-678-0393
MFG
SPD ELECTRICAL SYSTEMS INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB171
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 8 CLASS AND 00 GRADE
OVERALL OUTSIDE DIAMETER: 75.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 16.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
993L09T1E
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780393
NSN
3110-00-678-0393
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB171
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 8 CLASS AND 00 GRADE
OVERALL OUTSIDE DIAMETER: 75.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 16.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
993L09T1E
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780393
NSN
3110-00-678-0393
MFG
GENERAL MOTORS CORP
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB171
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 8 CLASS AND 00 GRADE
OVERALL OUTSIDE DIAMETER: 75.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 16.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
FFB171
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780393
NSN
3110-00-678-0393
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB171
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 8 CLASS AND 00 GRADE
OVERALL OUTSIDE DIAMETER: 75.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 16.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
Z993L09T1E
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780393
NSN
3110-00-678-0393
MFG
GENERAL MOTORS CORP
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB171
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 8 CLASS AND 00 GRADE
OVERALL OUTSIDE DIAMETER: 75.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 16.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
Z993L09T1E
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780393
NSN
3110-00-678-0393
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: TIGHT
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB171
NONDEFINITIVE SPEC/STD DATA: 111 TYPE AND 8 CLASS AND 00 GRADE
OVERALL OUTSIDE DIAMETER: 75.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 16.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
202H5
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780394
NSN
3110-00-678-0394
MFG
BARDEN CORPORATION THE DIV BARDEN PRECISION BEARINGS DIVISION
Description
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING PLASTIC PHENOLIC RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL OUTSIDE DIAMETER: 35.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 11.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
2868830-2
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780394
NSN
3110-00-678-0394
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING PLASTIC PHENOLIC RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL OUTSIDE DIAMETER: 35.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 11.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
QH20202DTL7A
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780394
NSN
3110-00-678-0394
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING PLASTIC PHENOLIC RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL OUTSIDE DIAMETER: 35.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 11.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
GR24SRS
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110006780401
NSN
3110-00-678-0401
MFG
MCGILL MANUFACTURING COMPANY INC DBA EMERSON POWER TRANSMISSION
Description
ALIGNMENT TYPE: RIGID
BEARING SEAL TYPE: LIPS TURNED INWARDLY
BORE DIAMETER: 1.5000 INCHES NOMINAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 2.0625 INCHES NOMINAL
OVERALL WIDTH: 1.2500 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
SEAL QUANTITY: 2
SPECIAL FEATURES: OIL HOLE AND OIL GROOVE IN OUTER RACE,DUMBBELL SHAPED ROLLERS
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATOR: 424 NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
SURFACE FINISH: GROUND
Related Searches:
GR24SRS
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110006780401
NSN
3110-00-678-0401
MFG
MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING.
Description
ALIGNMENT TYPE: RIGID
BEARING SEAL TYPE: LIPS TURNED INWARDLY
BORE DIAMETER: 1.5000 INCHES NOMINAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 2.0625 INCHES NOMINAL
OVERALL WIDTH: 1.2500 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
SEAL QUANTITY: 2
SPECIAL FEATURES: OIL HOLE AND OIL GROOVE IN OUTER RACE,DUMBBELL SHAPED ROLLERS
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATOR: 424 NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
SURFACE FINISH: GROUND
Related Searches:
111074
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110006780403
NSN
3110-00-678-0403
111074
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110006780403
NSN
3110-00-678-0403
MFG
CINCINNATI MACHINE CO
Description
BORE DIAMETER: 1.1250 INCHES NOMINAL
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL
CONE WIDTH: 0.6875 INCHES NOMINAL
MATERIAL: STEEL OVERALL
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STYLE DESIGNATOR: 552 NORMAL ANGLE
Related Searches:
15590
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110006780403
NSN
3110-00-678-0403
15590
CONE AND ROLLERS,TAPERED ROLLER BEARING
NSN, MFG P/N
3110006780403
NSN
3110-00-678-0403
MFG
THE TIMKEN CORPORATION
Description
BORE DIAMETER: 1.1250 INCHES NOMINAL
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL
CONE WIDTH: 0.6875 INCHES NOMINAL
MATERIAL: STEEL OVERALL
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STYLE DESIGNATOR: 552 NORMAL ANGLE
Related Searches:
40815
BEARING,ROLLER,NEEDLE
NSN, MFG P/N
3110006780407
NSN
3110-00-678-0407
MFG
CNH AMERICA LLC
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.5625 INCHES NOMINAL
OVERALL WIDTH: 0.3125 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATOR: 410 NON-SEPARABLE, OPEN END, DRAWN SHELL
Related Searches:
909067
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780408
NSN
3110-00-678-0408
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BORE DIAMETER: 0.7498 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 0.4700 INCHES NOMINAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OUTER RING WIDTH: 0.4700 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.0794 INCHES MINIMUM AND 2.0800 INCHES MAXIMUM
OVERALL WIDTH: 0.6980 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: INNER RING SHOULDEREDONE SIDE; ANGULARITY 25 DEG PORM 10 DEG
STYLE DESIGNATOR: 22D COUNTERBORED OUTER RING, MAGNETO TYPE, SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
909067
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006780408
NSN
3110-00-678-0408
MFG
GENERAL MOTORS CORP
Description
BORE DIAMETER: 0.7498 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
INNER RING WIDTH: 0.4700 INCHES NOMINAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL OVERALL
OUTER RING WIDTH: 0.4700 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.0794 INCHES MINIMUM AND 2.0800 INCHES MAXIMUM
OVERALL WIDTH: 0.6980 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPECIAL FEATURES: INNER RING SHOULDEREDONE SIDE; ANGULARITY 25 DEG PORM 10 DEG
STYLE DESIGNATOR: 22D COUNTERBORED OUTER RING, MAGNETO TYPE, SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
5666683
RING,BEARING,OUTER
NSN, MFG P/N
3110006780411
NSN
3110-00-678-0411
MFG
GENERAL MOTORS CORP SAGINAW DIV
Description
BORE DIAMETER: 1.1170 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM
OVERALL WIDTH: 0.3010 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM
SPECIAL FEATURES: RACEWAY FOR 9/32 IN. DIA BALLS
STYLE DESIGNATOR: 502 OUTER RING, BALL
SURFACE FINISH: GROUND