My Quote Request
3110-00-697-8230
20 Products
2444576
BEARING,LANDING GEA
NSN, MFG P/N
3110006978230
NSN
3110-00-697-8230
MFG
BOEING COMPANY THE DBA BOEING DIV DEFENSE SPACE & SECURITY - GLOBAL MOBILITY SYSTEMS
Description
BEARING,LANDING GEA
Related Searches:
MFS1KDD7C5FS160
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006955102
NSN
3110-00-695-5102
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
DESIGN CONTROL REFERENCE: 440947
FLANGE OUTSIDE DIAMETER: 0.6830 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM
FLANGE WIDTH: 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: TG-2573,FSCM 59595 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 94580
MATERIAL: STEEL OVERALL
OUTER RING OUTSIDE DIAMETER: 0.6247 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
OVERALL WIDTH: 0.0910 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: SELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
Related Searches:
MFSKDD7E7023
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006955102
NSN
3110-00-695-5102
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
DESIGN CONTROL REFERENCE: 440947
FLANGE OUTSIDE DIAMETER: 0.6830 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM
FLANGE WIDTH: 0.0400 INCHES MINIMUM AND 0.0440 INCHES MAXIMUM
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: TG-2573,FSCM 59595 MFR REF SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 94580
MATERIAL: STEEL OVERALL
OUTER RING OUTSIDE DIAMETER: 0.6247 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
OVERALL WIDTH: 0.0910 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: SELECTED,CLASSIFIED AND TESTED BY ASSY MFR AT HIS PLANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
Related Searches:
273825
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110006957452
NSN
3110-00-695-7452
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 40.0 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
DESIGN CONTROL REFERENCE: 273825
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0019 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MANUFACTURERS CODE: 77445
MATERIAL: STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING COPPER ALLOY RETAINER STEEL COMP E52100 ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6440 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6441 ASSN STD 2ND MATERIAL RESPONSE INNER RING AMS 6440 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6441 ASSN STD 2ND MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER AMS 6440 ASSN
OVERALL OUTSIDE DIAMETER: 68.0 MILLIMETERS NOMINAL
OVERALL WIDTH: 15.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
STYLE DESIGNATOR: 252A SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
~1: STD SINGLE MATERIAL RESPONSE ROLLER
Related Searches:
277789
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110006957452
NSN
3110-00-695-7452
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 40.0 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
DESIGN CONTROL REFERENCE: 273825
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0019 INCHES MAXIMUM RADIAL
LOCATING FEATURE: NONLOCATING
MANUFACTURERS CODE: 77445
MATERIAL: STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING COPPER ALLOY RETAINER STEEL COMP E52100 ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6440 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6441 ASSN STD 2ND MATERIAL RESPONSE INNER RING AMS 6440 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6441 ASSN STD 2ND MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER AMS 6440 ASSN
OVERALL OUTSIDE DIAMETER: 68.0 MILLIMETERS NOMINAL
OVERALL WIDTH: 15.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
STYLE DESIGNATOR: 252A SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
~1: STD SINGLE MATERIAL RESPONSE ROLLER
Related Searches:
253539
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006960032
NSN
3110-00-696-0032
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 4.3304 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III END ITEM IDENTIFICATION: ACFT ENG J-57
INNER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0015 INCHES MINIMUM RADIAL AND 0.0019 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL COMP E51100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING COPPER ALLOY RETAINER
OUTER RING WIDTH: 0.7824 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 5.9051 INCHES MINIMUM AND 5.9055 INCHES MAXIMUM
RETAINER FABRICATION METHOD: MACHINED
SPECIAL FEATURES: SILVER PLATE CAGE 0.0005-0.0015 THK PER AMS 2412. NO STRIKE METAL REQD.BAKE 475-500F FOR 2HRS TO CHECK FOR BOND ON LAND RIDING SURFACES AND BALL POCKETS. LEAD PLATE ALL SILVER SURFACES 0.0005-0.0015 THK PER AMS 2414
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 26A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
261136
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006960032
NSN
3110-00-696-0032
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 4.3304 INCHES MINIMUM AND 4.3307 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III END ITEM IDENTIFICATION: ACFT ENG J-57
INNER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0015 INCHES MINIMUM RADIAL AND 0.0019 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MATERIAL: STEEL COMP E51100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING COPPER ALLOY RETAINER
OUTER RING WIDTH: 0.7824 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 5.9051 INCHES MINIMUM AND 5.9055 INCHES MAXIMUM
RETAINER FABRICATION METHOD: MACHINED
SPECIAL FEATURES: SILVER PLATE CAGE 0.0005-0.0015 THK PER AMS 2412. NO STRIKE METAL REQD.BAKE 475-500F FOR 2HRS TO CHECK FOR BOND ON LAND RIDING SURFACES AND BALL POCKETS. LEAD PLATE ALL SILVER SURFACES 0.0005-0.0015 THK PER AMS 2414
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 26A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
10012814
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006963611
NSN
3110-00-696-3611
MFG
L-3 COMMUNICATIONS CORPORATION DBA COMMUNICATIONS SYSTEMS WEST DIV COMMUNICATION SYSTEMS WEST
Description
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 6
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
10012814
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006963611
NSN
3110-00-696-3611
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 6
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
10012814
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006963611
NSN
3110-00-696-3611
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 6
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
48322
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006963611
NSN
3110-00-696-3611
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 6
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
48322
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006963611
NSN
3110-00-696-3611
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 6
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
48322
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110006963611
NSN
3110-00-696-3611
MFG
ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO
Description
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
BOLT CIRCLE HOLE QUANTITY: 6
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
25-3096Y
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110006968971
NSN
3110-00-696-8971
MFG
PARKER-HANNIFIN CORPORATION DBA HYDRAULIC PUMP DIVISION
Description
BORE DIAMETER: 2.7550 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: 50128
MANUFACTURERS CODE: 93835
OVERALL OUTSIDE DIAMETER: 3.7490 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM
OVERALL WIDTH: 1.0000 INCHES NOMINAL
STYLE DESIGNATOR: 252D SINGLE ROW, NON-LOCATING, CYLINDRICAL INNER AND OUTER RING, SEPARABLE
THE MANUFACTURERS DATA:
Related Searches:
25-3096Z
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110006968971
NSN
3110-00-696-8971
MFG
PARKER-HANNIFIN CORPORATION DBA HYDRAULIC PUMP DIVISION
Description
BORE DIAMETER: 2.7550 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: 50128
MANUFACTURERS CODE: 93835
OVERALL OUTSIDE DIAMETER: 3.7490 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM
OVERALL WIDTH: 1.0000 INCHES NOMINAL
STYLE DESIGNATOR: 252D SINGLE ROW, NON-LOCATING, CYLINDRICAL INNER AND OUTER RING, SEPARABLE
THE MANUFACTURERS DATA:
Related Searches:
50128
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110006968971
NSN
3110-00-696-8971
MFG
PARKER-HANNIFIN CORPORATION DBA HYDRAULIC SYSTEMS DIVISION DIV HYDRAULIC SYSTEMS DIVISION
Description
BORE DIAMETER: 2.7550 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: 50128
MANUFACTURERS CODE: 93835
OVERALL OUTSIDE DIAMETER: 3.7490 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM
OVERALL WIDTH: 1.0000 INCHES NOMINAL
STYLE DESIGNATOR: 252D SINGLE ROW, NON-LOCATING, CYLINDRICAL INNER AND OUTER RING, SEPARABLE
THE MANUFACTURERS DATA:
Related Searches:
G75KP4
BEARING,BALL,ROD END
NSN, MFG P/N
3110006970039
NSN
3110-00-697-0039
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: LIPS TURNED INWARDLY
BORE DIAMETER: 0.2500 INCHES NOMINAL
DESIGN CONTROL REFERENCE: G75KP4
INNER RING WIDTH: 0.4840 INCHES NOMINAL
LENGTH FROM BORE CENTER TO SHANK END: 2.7500 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 26512
MATERIAL: STEEL COMP 4130 ROD END BODY
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
NOMINAL THREAD SIZE: 0.375 INCHES
OVERALL LENGTH: 3.3120 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.9180 INCHES MINIMUM AND 0.9190 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT LOCATION: EXTERNAL
SHANK DIAMETER: 0.3710 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM
SHANK STYLE: 651 EXTERNALLY THREADED
SHIELD QUANTITY: 2
STYLE DESIGNATOR: 460 SINGLE ROW, BALL
SURFACE TREATMENT: CADMIUM ROD END BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
37F38249-1
BEARING,BALL,ROD END
NSN, MFG P/N
3110006970432
NSN
3110-00-697-0432
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
DESIGN CONTROL REFERENCE: 37F38249-1
LENGTH FROM BORE CENTER TO SHANK END: 3.4800 INCHES NOMINAL
MANUFACTURERS CODE: 26512
NOMINAL THREAD SIZE: 0.562 INCHES
OVERALL LENGTH: 4.5600 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 4.5600 INCHES NOMINAL
SHANK DIAMETER: 0.5625 INCHES NOMINAL
SHANK STYLE: 651 EXTERNALLY THREADED
SHANK THREAD LENGTH: 1.6700 INCHES NOMINAL
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNF
Related Searches:
83166-01
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110006970486
NSN
3110-00-697-0486
MFG
GE AVIATION SYSTEMS LLC
Description
BORE DIAMETER: 0.1684 INCHES NOMINAL
BORE SHAPE: STRAIGHT
DESIGN CONTROL REFERENCE: 83166-01
III END ITEM IDENTIFICATION: VERTICAL GYRO,AIRCRAFT
INTERNAL FIT-UP DESIGNATION: STANDARD
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
MANUFACTURERS CODE: 35351
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
OVERALL WIDTH: 0.1969 INCHES NOMINAL
RETAINER FABRICATION METHOD: MACHINED
SPECIAL FEATURES: OUTER RING AND BALL ASSEMBLY ONLY,SELECTED,CLASSIFIED AND TESTED BY THE ASSEMBLY MFR AT HIS PLANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
Related Searches:
207W6
BEARING,BALL
NSN, MFG P/N
3110006978182
NSN
3110-00-697-8182
MFG
OTIS ELEVATOR CO SUB OF UNITED TECHNOLOGIES CORP
Description
BEARING,BALL