My Quote Request
3110-00-799-9145
20 Products
GB525J4BF
BEARING,BALL,ROD END
NSN, MFG P/N
3110007999145
NSN
3110-00-799-9145
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
INNER RING WIDTH: 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.3340 INCHES MINIMUM AND 2.3540 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK BORE DEPTH: 1.2190 INCHES NOMINAL
SHANK BORE DIAMETER: 0.3860 INCHES NOMINAL
SHANK DIAMETER: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
SHANK STYLE: 659 HOLLOW
SPECIAL FEATURES: SHANK FILLED WITH NARCO NO. 3119 PUTTY
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
REP4H6FS243
BEARING,BALL,ROD END
NSN, MFG P/N
3110007999145
NSN
3110-00-799-9145
MFG
TIMKEN AEROSPACE INC
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
INNER RING WIDTH: 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.3340 INCHES MINIMUM AND 2.3540 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK BORE DEPTH: 1.2190 INCHES NOMINAL
SHANK BORE DIAMETER: 0.3860 INCHES NOMINAL
SHANK DIAMETER: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
SHANK STYLE: 659 HOLLOW
SPECIAL FEATURES: SHANK FILLED WITH NARCO NO. 3119 PUTTY
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
REP4H6FS570
BEARING,BALL,ROD END
NSN, MFG P/N
3110007999145
NSN
3110-00-799-9145
MFG
ROLLER BEARING COMPANY OF AMERICA INC. DBA RBC HEIM BEARINGS DIVISION
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
INNER RING WIDTH: 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.3340 INCHES MINIMUM AND 2.3540 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK BORE DEPTH: 1.2190 INCHES NOMINAL
SHANK BORE DIAMETER: 0.3860 INCHES NOMINAL
SHANK DIAMETER: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
SHANK STYLE: 659 HOLLOW
SPECIAL FEATURES: SHANK FILLED WITH NARCO NO. 3119 PUTTY
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
REP4H6FS570
BEARING,BALL,ROD END
NSN, MFG P/N
3110007999145
NSN
3110-00-799-9145
MFG
TIMKEN AEROSPACE INC
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
INNER RING WIDTH: 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT
OUTER RING WIDTH: 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
OVERALL LENGTH: 2.3340 INCHES MINIMUM AND 2.3540 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK BORE DEPTH: 1.2190 INCHES NOMINAL
SHANK BORE DIAMETER: 0.3860 INCHES NOMINAL
SHANK DIAMETER: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
SHANK STYLE: 659 HOLLOW
SPECIAL FEATURES: SHANK FILLED WITH NARCO NO. 3119 PUTTY
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
Related Searches:
7400
COLLAR,BEARING
NSN, MFG P/N
3110007999354
NSN
3110-00-799-9354
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 1.8765 INCHES MINIMUM AND 1.8785 INCHES MAXIMUM
MATERIAL: IRON OVERALL
OUTSIDE DIAMETER: 4.0000 INCHES NOMINAL
OVERALL WIDTH: 0.9687 INCHES NOMINAL
STYLE DESIGNATOR: 548 BEARING
Related Searches:
SM1114J
COLLAR,BEARING
NSN, MFG P/N
3110007999354
NSN
3110-00-799-9354
MFG
TIMKEN AEROSPACE INC
Description
BORE DIAMETER: 1.8765 INCHES MINIMUM AND 1.8785 INCHES MAXIMUM
MATERIAL: IRON OVERALL
OUTSIDE DIAMETER: 4.0000 INCHES NOMINAL
OVERALL WIDTH: 0.9687 INCHES NOMINAL
STYLE DESIGNATOR: 548 BEARING
Related Searches:
305SZZ01L0AG06A78000000
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
305SZZ01L0AG06A78000000
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
305SZZ7FIT
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
NCR CORPORATION
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
8000135
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
FF-B-171/5
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
FFB171/05J05N3B
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
Z99605L1BC
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
GENERAL MOTORS CORP
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
Z99605L1BC
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110007999725
NSN
3110-00-799-9725
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: LOOSE
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-B-171/5
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 17.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
77343925
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008000267
NSN
3110-00-800-0267
MFG
GOODRICH CONTROL SYSTEMS LIMITED
Description
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL CORROSION RESISTING BALL STEEL CORROSION RESISTING INNER RING STEEL CORROSION RESISTING OUTER RING PLASTIC PHENOLIC RETAINER
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
SURFACE FINISH: GROUND
Related Searches:
SR35B21
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008000267
NSN
3110-00-800-0267
MFG
NEW HAMPSHIRE BALL BEARINGS INC . DIV HITECH DIVISION
Description
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL CORROSION RESISTING BALL STEEL CORROSION RESISTING INNER RING STEEL CORROSION RESISTING OUTER RING PLASTIC PHENOLIC RETAINER
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
SURFACE FINISH: GROUND
Related Searches:
SR3B0-11
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008000267
NSN
3110-00-800-0267
MFG
BARDEN CORPORATION THE DIV BARDEN PRECISION BEARINGS DIVISION
Description
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL CORROSION RESISTING BALL STEEL CORROSION RESISTING INNER RING STEEL CORROSION RESISTING OUTER RING PLASTIC PHENOLIC RETAINER
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
SURFACE FINISH: GROUND
Related Searches:
SR3MB5
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008000267
NSN
3110-00-800-0267
MFG
TIMKEN AEROSPACE & SUPER PRECISION DBA TIMKEN SUPER PRECISION DIV TIMKEN SUPER PRECISION
Description
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL CORROSION RESISTING BALL STEEL CORROSION RESISTING INNER RING STEEL CORROSION RESISTING OUTER RING PLASTIC PHENOLIC RETAINER
RETAINER FABRICATION METHOD: MACHINED
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
SURFACE FINISH: GROUND
Related Searches:
114H4804-1
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110008001334
NSN
3110-00-800-1334
MFG
THE BOEING COMPANY DBA BOEING
Description
APERTURE DIAMETER: 0.938 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
DESIGN CONTROL REFERENCE: 114H4804-1
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM
DISTANCE BETWEEN HOLES ALONG WIDTH: 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM
DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE: 0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM
LENGTH: 2.000 INCHES NOMINAL
MANUFACTURERS CODE: 77272
MATERIAL: ALUMINUM ALLOY OVERALL
MOUNTING HOLE ARRANGEMENT STYLE: D12 FOUR HOLES
MOUNTING HOLE DIAMETER: 0.159 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OVERALL THICKNESS: 0.058 INCHES NOMINAL
SPECIFICATION/STANDARD DATA: 77272-114H4804-1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: B32 RECTANGLE
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
THE MANUFACTURERS DATA:
WIDTH: 1.750 INCHES NOMINAL
Related Searches:
114H4804-1
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110008001334
NSN
3110-00-800-1334
MFG
THE BOEING COMPANY DBA BOEING
Description
APERTURE DIAMETER: 0.938 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
DESIGN CONTROL REFERENCE: 114H4804-1
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.374 INCHES MINIMUM AND 1.376 INCHES MAXIMUM
DISTANCE BETWEEN HOLES ALONG WIDTH: 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM
DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE: 0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM
LENGTH: 2.000 INCHES NOMINAL
MANUFACTURERS CODE: 77272
MATERIAL: ALUMINUM ALLOY OVERALL
MOUNTING HOLE ARRANGEMENT STYLE: D12 FOUR HOLES
MOUNTING HOLE DIAMETER: 0.159 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OVERALL THICKNESS: 0.058 INCHES NOMINAL
SPECIFICATION/STANDARD DATA: 77272-114H4804-1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: B32 RECTANGLE
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
THE MANUFACTURERS DATA:
WIDTH: 1.750 INCHES NOMINAL
Related Searches:
204-001-058-1
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110008003434
NSN
3110-00-800-3434
MFG
BELL HELICOPTER TEXTRON INC.
Description
ALIGNMENT TYPE: SELF-ALIGNING
BORE DIAMETER: 0.2500 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 204-001-058-1
INNER RING WIDTH: 0.5930 INCHES NOMINAL
LENGTH FROM BORE CENTER TO SHANK END: 1.8750 INCHES NOMINAL
LUBRICATION MATERIAL: GREASE
MANUFACTURERS CODE: 97499
MATERIAL: STEEL SHAFT
NOMINAL THREAD SIZE: 0.438 INCHES
OUTER RING WIDTH: 0.3593 INCHES NOMINAL
OVERALL LENGTH: 2.3700 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.9350 INCHES MINIMUM AND 0.9700 INCHES MAXIMUM
SELF-ALIGNMENT ANGLE: 15.00 DEGREES NOMINAL
SHANK DIAMETER: 0.6200 INCHES NOMINAL
SHANK THREAD LENGTH: 1.1250 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF