My Quote Request
3110-00-823-4835
20 Products
91536
BALL CHECK VALVE
NSN, MFG P/N
3110008234835
NSN
3110-00-823-4835
MFG
UNITED STATES PLASTIC CORP.
Description
BALL CHECK VALVE
Related Searches:
015-37519-4034
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234849
NSN
3110-00-823-4849
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.3750 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL
OVERALL WIDTH: 0.2812 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
7230928P001
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234849
NSN
3110-00-823-4849
MFG
BARDEN CORPORATION THE DIV BARDEN PRECISION BEARINGS DIVISION
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.3750 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL
OVERALL WIDTH: 0.2812 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
7230928P001
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234849
NSN
3110-00-823-4849
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.3750 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL
OVERALL WIDTH: 0.2812 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
Z99R6DDZJ7CJ
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234849
NSN
3110-00-823-4849
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.3750 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL
OVERALL WIDTH: 0.2812 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
Z99R6XR7CJ
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234849
NSN
3110-00-823-4849
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.3750 INCHES NOMINAL
BORE SHAPE: STRAIGHT
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER RUBBER SYNTHETIC SEAL
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL
OVERALL WIDTH: 0.2812 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SEAL QUANTITY: 2
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
201525
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234851
NSN
3110-00-823-4851
MFG
FAIRCHILD CONTROLS CORPORATION
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
7303ABEC3
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234851
NSN
3110-00-823-4851
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
H20303-3A
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110008234851
NSN
3110-00-823-4851
MFG
GENERAL MOTORS CORP DELCO MORAINE NDH DIV
Description
BORE DIAMETER: 17.00 MILLIMETERS NOMINAL
BORE SHAPE: STRAIGHT
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
LOAD DIRECTION: ANGULAR
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 10D COUNTERBORED OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
CF-3/4S26
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
CF-3/4S26
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
MFG
MCGILL MANUFACTURING COMPANY INC DBA EMERSON POWER TRANSMISSION
Description
BEARING SEAL TYPE: CONTACT
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OUTER RING STEEL ROLLER RUBBER SYNTHETIC SEAL STEEL STUD STEEL COMP E52100 WASHER
NOMINAL THREAD SIZE: 0.375 INCHES
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL LENGTH: 1.4063 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: STUD END TAPPED FOR 0.250 @-28NF2 THREAD,ROLLER END DRILLED FOR 0.1875 IN. NO. 1633 ALEMITE @DRIVE FITTING AND SUPPLIED WITH LOOSE METAL PLUG,OIL HOLE IN UNTHREADED PART OF STUD 0.6250 IN. FROM STUD END,SEAL LIPS OUTWARD
STUD DIAMETER: 0.3750 INCHES NOMINAL
STUD LENGTH: 0.8750 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.3750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CF-3/4S26
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
CF-3/4S26
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
MFG
MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING.
Description
BEARING SEAL TYPE: CONTACT
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OUTER RING STEEL ROLLER RUBBER SYNTHETIC SEAL STEEL STUD STEEL COMP E52100 WASHER
NOMINAL THREAD SIZE: 0.375 INCHES
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL LENGTH: 1.4063 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: STUD END TAPPED FOR 0.250 @-28NF2 THREAD,ROLLER END DRILLED FOR 0.1875 IN. NO. 1633 ALEMITE @DRIVE FITTING AND SUPPLIED WITH LOOSE METAL PLUG,OIL HOLE IN UNTHREADED PART OF STUD 0.6250 IN. FROM STUD END,SEAL LIPS OUTWARD
STUD DIAMETER: 0.3750 INCHES NOMINAL
STUD LENGTH: 0.8750 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.3750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
EL09-011-99
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
EL09-011-99
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
MFG
SCIENCE APPLICATIONS INTERNATIONAL CORPORATION DBA SAIC
Description
BEARING SEAL TYPE: CONTACT
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OUTER RING STEEL ROLLER RUBBER SYNTHETIC SEAL STEEL STUD STEEL COMP E52100 WASHER
NOMINAL THREAD SIZE: 0.375 INCHES
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL LENGTH: 1.4063 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: STUD END TAPPED FOR 0.250 @-28NF2 THREAD,ROLLER END DRILLED FOR 0.1875 IN. NO. 1633 ALEMITE @DRIVE FITTING AND SUPPLIED WITH LOOSE METAL PLUG,OIL HOLE IN UNTHREADED PART OF STUD 0.6250 IN. FROM STUD END,SEAL LIPS OUTWARD
STUD DIAMETER: 0.3750 INCHES NOMINAL
STUD LENGTH: 0.8750 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.3750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
EL09-011-99
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
EL09-011-99
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008234874
NSN
3110-00-823-4874
MFG
HARSCO CORP BMY-COMBAT SYSTEMS DIV
Description
BEARING SEAL TYPE: CONTACT
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL OUTER RING STEEL ROLLER RUBBER SYNTHETIC SEAL STEEL STUD STEEL COMP E52100 WASHER
NOMINAL THREAD SIZE: 0.375 INCHES
OUTER RING WIDTH: 0.5000 INCHES NOMINAL
OVERALL LENGTH: 1.4063 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: STUD END TAPPED FOR 0.250 @-28NF2 THREAD,ROLLER END DRILLED FOR 0.1875 IN. NO. 1633 ALEMITE @DRIVE FITTING AND SUPPLIED WITH LOOSE METAL PLUG,OIL HOLE IN UNTHREADED PART OF STUD 0.6250 IN. FROM STUD END,SEAL LIPS OUTWARD
STUD DIAMETER: 0.3750 INCHES NOMINAL
STUD LENGTH: 0.8750 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.3750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
0904022
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110008236028
NSN
3110-00-823-6028
MFG
WABCO CONSTRUCTION AND MINING EQUIPMENT GROUP INDIANAPOLIS PLANT AN AMERICAN STANDARD INC CO
Description
APERTURE DIAMETER: 2.875 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
DESIGN CONTROL REFERENCE: V09-004-022
MANUFACTURERS CODE: 97403
MATERIAL: STEEL OVERALL
MOUNTING HOLE DIAMETER: 0.343 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 5.875 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 4.000 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
THE MANUFACTURERS DATA:
Related Searches:
B8005-09-004FN22
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110008236028
NSN
3110-00-823-6028
B8005-09-004FN22
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110008236028
NSN
3110-00-823-6028
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
APERTURE DIAMETER: 2.875 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
DESIGN CONTROL REFERENCE: V09-004-022
MANUFACTURERS CODE: 97403
MATERIAL: STEEL OVERALL
MOUNTING HOLE DIAMETER: 0.343 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 5.875 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 4.000 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
THE MANUFACTURERS DATA:
Related Searches:
V09-004-022
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110008236028
NSN
3110-00-823-6028
MFG
CECOM LR CENTER
Description
APERTURE DIAMETER: 2.875 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE: C4A RAISED SURFACE WITH APERTURE
DESIGN CONTROL REFERENCE: V09-004-022
MANUFACTURERS CODE: 97403
MATERIAL: STEEL OVERALL
MOUNTING HOLE DIAMETER: 0.343 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 5.875 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 4.000 INCHES NOMINAL
STYLE DESIGNATOR: B1 ROUND
THE MANUFACTURERS DATA:
Related Searches:
324266
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008236297
NSN
3110-00-823-6297
MFG
LUCENT TECHNOLOGIES INC DBA FEDERAL MARKETING GROUP
Description
MATERIAL: STEEL COMP E52100 OUTER RING STEEL COMP E52100 OR STEEL COMP E50100 ROLLER STEEL COMP 1117 AND STEEL COMP 1018 STUD
NOMINAL THREAD SIZE: 0.112 INCHES
OUTER RING WIDTH: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
OVERALL LENGTH: 0.3520 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM
SPECIAL FEATURES: 0.2500 IN. HEX LOCATED ON HEAD OF STUD,0.0470 IN HIGH; NYLON INSERT 1/16 IN. DIA ON THREADED SECTION OF STUD
STUD DIAMETER: 0.1120 INCHES NOMINAL
STUD LENGTH: 0.1830 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE OUTER RING OXIDE STUD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.1830 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
324266
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008236297
NSN
3110-00-823-6297
MFG
TELEMECHANICS INC
Description
MATERIAL: STEEL COMP E52100 OUTER RING STEEL COMP E52100 OR STEEL COMP E50100 ROLLER STEEL COMP 1117 AND STEEL COMP 1018 STUD
NOMINAL THREAD SIZE: 0.112 INCHES
OUTER RING WIDTH: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
OVERALL LENGTH: 0.3520 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM
SPECIAL FEATURES: 0.2500 IN. HEX LOCATED ON HEAD OF STUD,0.0470 IN HIGH; NYLON INSERT 1/16 IN. DIA ON THREADED SECTION OF STUD
STUD DIAMETER: 0.1120 INCHES NOMINAL
STUD LENGTH: 0.1830 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE OUTER RING OXIDE STUD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.1830 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
324266
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008236297
NSN
3110-00-823-6297
MFG
AMERICAN TELEPHONE AND TELEGRAPH CO
Description
MATERIAL: STEEL COMP E52100 OUTER RING STEEL COMP E52100 OR STEEL COMP E50100 ROLLER STEEL COMP 1117 AND STEEL COMP 1018 STUD
NOMINAL THREAD SIZE: 0.112 INCHES
OUTER RING WIDTH: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
OVERALL LENGTH: 0.3520 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM
SPECIAL FEATURES: 0.2500 IN. HEX LOCATED ON HEAD OF STUD,0.0470 IN HIGH; NYLON INSERT 1/16 IN. DIA ON THREADED SECTION OF STUD
STUD DIAMETER: 0.1120 INCHES NOMINAL
STUD LENGTH: 0.1830 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE OUTER RING OXIDE STUD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.1830 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
CC40861
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110008236297
NSN
3110-00-823-6297
MFG
TIMKEN AEROSPACE INC DBA TORRINGTON PRODUCT
Description
MATERIAL: STEEL COMP E52100 OUTER RING STEEL COMP E52100 OR STEEL COMP E50100 ROLLER STEEL COMP 1117 AND STEEL COMP 1018 STUD
NOMINAL THREAD SIZE: 0.112 INCHES
OUTER RING WIDTH: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
OVERALL LENGTH: 0.3520 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM
SPECIAL FEATURES: 0.2500 IN. HEX LOCATED ON HEAD OF STUD,0.0470 IN HIGH; NYLON INSERT 1/16 IN. DIA ON THREADED SECTION OF STUD
STUD DIAMETER: 0.1120 INCHES NOMINAL
STUD LENGTH: 0.1830 INCHES NOMINAL
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: OXIDE OUTER RING OXIDE STUD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.1830 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC