My Quote Request
3110-01-123-2873
20 Products
0-81310 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232873
NSN
3110-01-123-2873
MFG
WINSTED PRECISION BALL CORP
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8131 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
Related Searches:
MS27641-4R
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110011232324
NSN
3110-01-123-2324
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.2810 INCHES NOMINAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL CORROSION RESISTING RETAINER PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 1ST MATERIAL RESPONSE AND AMS 3666 ASSN STD 2ND MATERIAL
OUTER RING WIDTH: 0.2190 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: HEAT STABILIZED FOR OPERATION AT 250 DEG F; 80 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 196 SINGLE ROW INNER RING EXTENDED BOTH SIDES
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 21,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
~1: RESPONSE SEAL
Related Searches:
MS27641-4R
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110011232324
NSN
3110-01-123-2324
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2500 INCHES NOMINAL
INNER RING WIDTH: 0.2810 INCHES NOMINAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL CORROSION RESISTING RETAINER PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 1ST MATERIAL RESPONSE AND AMS 3666 ASSN STD 2ND MATERIAL
OUTER RING WIDTH: 0.2190 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL
SEAL QUANTITY: 2
SPECIAL FEATURES: HEAT STABILIZED FOR OPERATION AT 250 DEG F; 80 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 196 SINGLE ROW INNER RING EXTENDED BOTH SIDES
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 21,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
~1: RESPONSE SEAL
Related Searches:
MS27641-8R
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110011232325
NSN
3110-01-123-2325
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.5000 INCHES NOMINAL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS27641-8R
INNER RING WIDTH: 0.3750 INCHES NOMINAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL CORROSION RESISTING RETAINER PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 1ST MATERIAL RESPONSE AND AMS 3666 ASSN STD 2ND MATERIAL
OUTER RING WIDTH: 0.3130 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: HEAT STABILIZED FOR OPERATION AT 250 DEG F; 80 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 196 SINGLE ROW INNER RING EXTENDED BOTH SIDES
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
~1: RESPONSE SEAL
Related Searches:
SAE-AS27641
BEARING,BALL,AIRFRAME
NSN, MFG P/N
3110011232325
NSN
3110-01-123-2325
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.5000 INCHES NOMINAL
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS27641-8R
INNER RING WIDTH: 0.3750 INCHES NOMINAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL CORROSION RESISTING RETAINER PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES BALL 66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 1ST MATERIAL RESPONSE AND AMS 3666 ASSN STD 2ND MATERIAL
OUTER RING WIDTH: 0.3130 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL
SEAL QUANTITY: 2
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: HEAT STABILIZED FOR OPERATION AT 250 DEG F; 80 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
STYLE DESIGNATOR: 196 SINGLE ROW INNER RING EXTENDED BOTH SIDES
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
~1: RESPONSE SEAL
Related Searches:
101R004
BALL,BEARING
NSN, MFG P/N
3110011232618
NSN
3110-01-123-2618
MFG
AEROCONTROLEX GROUP INC
Description
BALL,BEARING
Related Searches:
21-300002
BEARING,BALL,THRUST
NSN, MFG P/N
3110011232865
NSN
3110-01-123-2865
MFG
CROSBY VALVE LTD
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 55.00 MILLIMETERS NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL OVERALL
OVERALL HEIGHT: 16.00 MILLIMETERS NOMINAL
OVERALL OUTSIDE DIAMETER: 78.00 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 156 GROOVED RACE SURFACE
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
51111
BEARING,BALL,THRUST
NSN, MFG P/N
3110011232865
NSN
3110-01-123-2865
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 55.00 MILLIMETERS NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL OVERALL
OVERALL HEIGHT: 16.00 MILLIMETERS NOMINAL
OVERALL OUTSIDE DIAMETER: 78.00 MILLIMETERS NOMINAL
RETAINER FABRICATION METHOD: PRESSED
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 156 GROOVED RACE SURFACE
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
4202003-1
RING,BEARING,OUTER
NSN, MFG P/N
3110011232866
NSN
3110-01-123-2866
MFG
TRIUMPH ACTUATION SYSTEMS - CONNECTICUT LLC
Description
BORE DIAMETER: 1.7435 INCHES MINIMUM AND 1.7440 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: 4202003-1
MANUFACTURERS CODE: 33068
MATERIAL: STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER: 2.0005 INCHES MINIMUM AND 2.0010 INCHES MAXIMUM
OVERALL WIDTH: 0.3400 INCHES NOMINAL
SPECIAL FEATURES: ALL SURF. EXCEPT ID CADMIUM PLATED,PS13145,76301
STYLE DESIGNATOR: 488 OUTER RING, ROLLER, CYLINDRICAL
SURFACE FINISH: GROUND
TEST DATA DOCUMENT: 76301-PS21201 SPECIFICATION
THE MANUFACTURERS DATA:
Related Searches:
0-81210 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232867
NSN
3110-01-123-2867
MFG
WINSTED PRECISION BALL CORP
Description
DESIGN CONTROL REFERENCE: 0.81210 GRADE 10
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MANUFACTURERS CODE: 27872
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8121 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
THE MANUFACTURERS DATA:
Related Searches:
0.81210 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232867
NSN
3110-01-123-2867
MFG
WINSTED PRECISION BALL CORP
Description
DESIGN CONTROL REFERENCE: 0.81210 GRADE 10
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MANUFACTURERS CODE: 27872
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8121 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
THE MANUFACTURERS DATA:
Related Searches:
0.81220 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232868
NSN
3110-01-123-2868
MFG
WINSTED PRECISION BALL CORP
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8122 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
Related Searches:
1548037
BALL,BEARING
NSN, MFG P/N
3110011232868
NSN
3110-01-123-2868
MFG
INDUSTRIAL TECTONICS INC. DBA ITI
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8122 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
Related Searches:
0-81230 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232869
NSN
3110-01-123-2869
MFG
WINSTED PRECISION BALL CORP
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8123 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
Related Searches:
0.81230 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232869
NSN
3110-01-123-2869
MFG
WINSTED PRECISION BALL CORP
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8123 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
Related Searches:
1548035
BALL,BEARING
NSN, MFG P/N
3110011232869
NSN
3110-01-123-2869
MFG
INDUSTRIAL TECTONICS INC. DBA ITI
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8123 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
Related Searches:
0-81240 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232870
NSN
3110-01-123-2870
MFG
WINSTED PRECISION BALL CORP
Description
DESIGN CONTROL REFERENCE: 0.81240 GRADE 10
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MANUFACTURERS CODE: 27872
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8124 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
THE MANUFACTURERS DATA:
Related Searches:
0.81240 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232870
NSN
3110-01-123-2870
MFG
WINSTED PRECISION BALL CORP
Description
DESIGN CONTROL REFERENCE: 0.81240 GRADE 10
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MANUFACTURERS CODE: 27872
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8124 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
THE MANUFACTURERS DATA:
Related Searches:
0.81260 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232871
NSN
3110-01-123-2871
MFG
WINSTED PRECISION BALL CORP
Description
DESIGN CONTROL REFERENCE: 0.81260 GRADE 10
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MANUFACTURERS CODE: 27872
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: M50 TOOL STEEL GRADE 10,27872 MFR REF SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8126 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL
THE MANUFACTURERS DATA:
Related Searches:
0.81310 GRADE 10
BALL,BEARING
NSN, MFG P/N
3110011232873
NSN
3110-01-123-2873
MFG
WINSTED PRECISION BALL CORP
Description
III END ITEM IDENTIFICATION: ACFT ENG J-57/J-75/TF-33
MATERIAL: STEEL COMP M50 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 10 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
ROLLING ELEMENT DIAMETER: 0.8131 INCHES NOMINAL
STYLE DESIGNATOR: 520 BALL