My Quote Request
3110-01-180-5223
20 Products
0098-LL-TJ2-4651
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110011805223
NSN
3110-01-180-5223
0098-LL-TJ2-4651
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110011805223
NSN
3110-01-180-5223
MFG
NAVAL SEA SYSTEMS COMMAND
Description
APERTURE DIAMETER: 0.562 INCHES NOMINAL
BOLT CIRCLE HOLE QUANTITY: 4
MATERIAL: STEEL COMP E4340 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING BOLT CIRCLE DIAMETER: 0.801 INCHES NOMINAL
MOUNTING HOLE ARRANGEMENT STYLE: D15 SINGLE BOLT HOLE CIRCLE
MOUNTING HOLE DIAMETER: 0.277 INCHES NOMINAL
MOUNTING HOLE TYPE: ROUND, UNTHREADED
OUTSIDE DIAMETER: 2.710 INCHES NOMINAL
OUTSIDE RAISED SURFACE DIAMETER: 1.560 INCHES NOMINAL
OVERALL THICKNESS: 0.187 INCHES NOMINAL
RAISED SURFACE HEIGHT: 0.188 INCHES NOMINAL
SPECIAL FEATURES: 6 LEGGED,STAR SHAPED BODY; CENTRALLY LOCATED RAISED SURFACE; ROUND APERTURE
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
S326
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
NEW HAMPSHIRE BALL BEARINGS INC. DBA NHBB DIV PRECISION DIVISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
S326-4
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
TIMKEN AEROSPACE & SUPER PRECISION DBA TIMKEN SUPER PRECISION DIV TIMKEN SUPER PRECISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
S326-4
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
NEW HAMPSHIRE BALL BEARINGS INC. DBA NHBB DIV PRECISION DIVISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
S326-4
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
SIMMONDS PRECISION PRODUCTS INC. DBA SENSORS AND INTEGRATED SYSTEMS
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
S5FCHH3
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
TIMKEN AEROSPACE & SUPER PRECISION DBA TIMKEN SUPER PRECISION DIV TIMKEN SUPER PRECISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
S5FCHH5
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
TIMKEN AEROSPACE & SUPER PRECISION DBA TIMKEN SUPER PRECISION DIV TIMKEN SUPER PRECISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
SFR1-53PPK18/36
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
NEW HAMPSHIRE BALL BEARINGS INC . DIV HITECH DIVISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
SSR1F-5ZZA3
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
NEW HAMPSHIRE BALL BEARINGS INC. DBA NHBB DIV PRECISION DIVISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
SSRIF-5ZZHA3P18LY15
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
SSRIF-5ZZHA3P18LY15
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804822
NSN
3110-01-180-4822
MFG
NEW HAMPSHIRE BALL BEARINGS INC. DBA NHBB DIV PRECISION DIVISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 0.0937 INCHES NOMINAL
BORE SHAPE: STRAIGHT
FLANGE OUTSIDE DIAMETER: 0.3590 INCHES NOMINAL
FLANGE WIDTH: 0.0310 INCHES NOMINAL
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: VERSILUBE G-300,FSCM 01139 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP 440C BALL STEEL COMP 440C INNER RING STEEL COMP 440C OUTER RING STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J405 ASSN STD ALL MATERIAL RESPONSES BALL SAE J405 ASSN STD ALL MATERIAL RESPONSES INNER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES OUTER RING SAE J405 ASSN STD ALL MATERIAL RESPONSES RETAINER SAE J405 ASSN STD ALL MATERIAL RESPONSES SHIELD
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL
OVERALL WIDTH: 0.1406 INCHES NOMINAL
RETAINER FABRICATION METHOD: PRESSED
SHIELD QUANTITY: 2
SPECIAL FEATURES: 25 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
STYLE DESIGNATOR: 14A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
~1: COMP 420FSE OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 RETAINER STEEL COMP 301 OR STEEL COMP 302 OR STEEL
~2: COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL
~3: COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 SHIELD
Related Searches:
1A/1202
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
SKF AEROENGINE UK
Description
BEARING,BALL,ANNULAR
Related Searches:
75B668301-201
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
BOEING COMPANY THE DBA BOEING
Description
BEARING,BALL,ANNULAR
Related Searches:
75B668301-201
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
RBC AIRCRAFT PRODUCTS INC.
Description
BEARING,BALL,ANNULAR
Related Searches:
75B668301-201
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
SKF AEROENGINE UK
Description
BEARING,BALL,ANNULAR
Related Searches:
75B668301-201
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
BRITISH AEROSPACE MILITARY AIRCRAFT & AEROSTRUCTURES
Description
BEARING,BALL,ANNULAR
Related Searches:
75B668301-201
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
BAE SYSTEMS PLC
Description
BEARING,BALL,ANNULAR
Related Searches:
75B668301-201
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
BAE SYSTEMS OPERATIONS LTD
Description
BEARING,BALL,ANNULAR
Related Searches:
C90907
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110011804823
NSN
3110-01-180-4823
MFG
RBC AIRCRAFT PRODUCTS INC.
Description
BEARING,BALL,ANNULAR
Related Searches:
47740-6
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110011804825
NSN
3110-01-180-4825
MFG
REXNORD INDUSTRIES LLC DIV BEARING OPERATION
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
DISTANCE FROM HOLE CENTER TO END: 0.3750 INCHES NOMINAL
FEATURES PROVIDED: FLUSH LUBRICATION FITTING
HOLE DIAMETER: 0.0700 INCHES NOMINAL
INNER RING WIDTH: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LENGTH FROM BORE CENTER TO SHANK END: 1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP E52100 INNER RING STEEL COMP 4620 ROD END BODY STEEL COMP E52100 ROLLER PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS SEAL STEEL COMP 430 SHIELD
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM
OVERALL LENGTH: 1.7400 INCHES MINIMUM AND 1.7950 INCHES MAXIMUM
SEAL QUANTITY: 1
SELF-ALIGNMENT ANGLE: 4.00 DEGREES MINIMUM
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.4370 INCHES NOMINAL
SHANK STYLE: 669 INTERNALLY THREADED W/BEAD, WRENCH FLATS AND HOLE
SHANK THREAD LENGTH: 0.7500 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM
SHIELD QUANTITY: 1
SPECIAL FEATURES: SECOND FLUSH LUBRICATION FITTING OPTIONAL
STYLE DESIGNATOR: 468 SINGLE ROW, CONCAVE ROLLERS
SURFACE TREATMENT: CADMIUM ROD END BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH ACROSS FLATS: 0.4370 INCHES NOMINAL
Related Searches:
SF4-4A1-501
BEARING,ROLLER,ROD END
NSN, MFG P/N
3110011804825
NSN
3110-01-180-4825
MFG
REXNORD INDUSTRIES LLC DIV BEARING OPERATION
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
DISTANCE FROM HOLE CENTER TO END: 0.3750 INCHES NOMINAL
FEATURES PROVIDED: FLUSH LUBRICATION FITTING
HOLE DIAMETER: 0.0700 INCHES NOMINAL
INNER RING WIDTH: 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LENGTH FROM BORE CENTER TO SHANK END: 1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL COMP E52100 INNER RING STEEL COMP 4620 ROD END BODY STEEL COMP E52100 ROLLER PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS SEAL STEEL COMP 430 SHIELD
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM
OVERALL LENGTH: 1.7400 INCHES MINIMUM AND 1.7950 INCHES MAXIMUM
SEAL QUANTITY: 1
SELF-ALIGNMENT ANGLE: 4.00 DEGREES MINIMUM
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.4370 INCHES NOMINAL
SHANK STYLE: 669 INTERNALLY THREADED W/BEAD, WRENCH FLATS AND HOLE
SHANK THREAD LENGTH: 0.7500 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM
SHIELD QUANTITY: 1
SPECIAL FEATURES: SECOND FLUSH LUBRICATION FITTING OPTIONAL
STYLE DESIGNATOR: 468 SINGLE ROW, CONCAVE ROLLERS
SURFACE TREATMENT: CADMIUM ROD END BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH ACROSS FLATS: 0.4370 INCHES NOMINAL