My Quote Request
3110-01-338-7394
20 Products
14116-14283
BEARING,ROLLER,TAPERED
NSN, MFG P/N
3110013387394
NSN
3110-01-338-7394
MFG
THE TIMKEN CORPORATION
Description
BACKFACE CORNER RADIUS: 2.3 MILLIMETERS NOMINAL
BORE DIAMETER: 30.226 MILLIMETERS NOMINAL
CONE CORNER RADIUS: 0.8 MILLIMETERS NOMINAL
CONE WIDTH: 19.583 MILLIMETERS NOMINAL
CUP WIDTH: 18.415 MILLIMETERS NOMINAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 72.085 MILLIMETERS NOMINAL
OVERALL WIDTH: 22.385 MILLIMETERS NOMINAL
STANDOUT WIDTH: 3.97 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 350 STRAIGHT BORE, NORMAL ANGLE
Related Searches:
14116-14283
BEARING,ROLLER,TAPERED
NSN, MFG P/N
3110013387394
NSN
3110-01-338-7394
MFG
APPLIED INDUSTRIAL TECHNOLOGIES -- PA LLC DBA APPLIED INDUSTRIAL TECHNOLOGIES 0138 DIV HARRISBURG
Description
BACKFACE CORNER RADIUS: 2.3 MILLIMETERS NOMINAL
BORE DIAMETER: 30.226 MILLIMETERS NOMINAL
CONE CORNER RADIUS: 0.8 MILLIMETERS NOMINAL
CONE WIDTH: 19.583 MILLIMETERS NOMINAL
CUP WIDTH: 18.415 MILLIMETERS NOMINAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 72.085 MILLIMETERS NOMINAL
OVERALL WIDTH: 22.385 MILLIMETERS NOMINAL
STANDOUT WIDTH: 3.97 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 350 STRAIGHT BORE, NORMAL ANGLE
Related Searches:
15330-27
BEARING,ROLLER,TAPERED
NSN, MFG P/N
3110013387394
NSN
3110-01-338-7394
MFG
HYDE MARINE INC.
Description
BACKFACE CORNER RADIUS: 2.3 MILLIMETERS NOMINAL
BORE DIAMETER: 30.226 MILLIMETERS NOMINAL
CONE CORNER RADIUS: 0.8 MILLIMETERS NOMINAL
CONE WIDTH: 19.583 MILLIMETERS NOMINAL
CUP WIDTH: 18.415 MILLIMETERS NOMINAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 72.085 MILLIMETERS NOMINAL
OVERALL WIDTH: 22.385 MILLIMETERS NOMINAL
STANDOUT WIDTH: 3.97 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 350 STRAIGHT BORE, NORMAL ANGLE
Related Searches:
16365-27
BEARING,ROLLER,TAPERED
NSN, MFG P/N
3110013387394
NSN
3110-01-338-7394
MFG
HYDE MARINE INC.
Description
BACKFACE CORNER RADIUS: 2.3 MILLIMETERS NOMINAL
BORE DIAMETER: 30.226 MILLIMETERS NOMINAL
CONE CORNER RADIUS: 0.8 MILLIMETERS NOMINAL
CONE WIDTH: 19.583 MILLIMETERS NOMINAL
CUP WIDTH: 18.415 MILLIMETERS NOMINAL
MATERIAL: STEEL OVERALL
OVERALL OUTSIDE DIAMETER: 72.085 MILLIMETERS NOMINAL
OVERALL WIDTH: 22.385 MILLIMETERS NOMINAL
STANDOUT WIDTH: 3.97 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 350 STRAIGHT BORE, NORMAL ANGLE
Related Searches:
510-13411-5
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110013387395
NSN
3110-01-338-7395
510-13411-5
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110013387395
NSN
3110-01-338-7395
MFG
THE BOEING COMPANY DBA BOEING
Description
MATERIAL: STEEL COMP 630 END PLATE STEEL COMP 440C OUTER RACE STEEL COMP 630 STUD
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE END PLATE AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE STUD
NOMINAL THREAD SIZE: 0.5000 INCHES
OUTER RING WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
OVERALL LENGTH: 2.0880 INCHES MINIMUM AND 2.1180 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM
SPECIAL FEATURES: TEFLON FABRIC SELF-LUBRICATING LINER BONDED TO RACE I.D. AND FACES
STUD DIAMETER: 0.5000 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM
STUD LENGTH: 1.3430 INCHES MINIMUM AND 1.3680 INCHES MAXIMUM
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: PASSIVATE END PLATE PASSIVATE OUTER RACE PASSIVATE STUD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE END PLATE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STUD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HTR207-5
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110013387395
NSN
3110-01-338-7395
MFG
U S BEARINGS
Description
MATERIAL: STEEL COMP 630 END PLATE STEEL COMP 440C OUTER RACE STEEL COMP 630 STUD
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE END PLATE AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE STUD
NOMINAL THREAD SIZE: 0.5000 INCHES
OUTER RING WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
OVERALL LENGTH: 2.0880 INCHES MINIMUM AND 2.1180 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM
SPECIAL FEATURES: TEFLON FABRIC SELF-LUBRICATING LINER BONDED TO RACE I.D. AND FACES
STUD DIAMETER: 0.5000 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM
STUD LENGTH: 1.3430 INCHES MINIMUM AND 1.3680 INCHES MAXIMUM
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: PASSIVATE END PLATE PASSIVATE OUTER RACE PASSIVATE STUD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE END PLATE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STUD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
Related Searches:
217096-2
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110013387479
NSN
3110-01-338-7479
MFG
EATON INDUSTRIAL CORPORATION DBA ARGO-TECH
Description
PLATE,RETAINING,BEARING
Related Searches:
2230177
BEARING,BALL,THRUST
NSN, MFG P/N
3110013387935
NSN
3110-01-338-7935
MFG
DEUTZ CORPORATION
Description
BEARING,BALL,THRUST
Related Searches:
208S45
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013388265
NSN
3110-01-338-8265
MFG
SKF USA INC DBA SKF AEROENGINE NORTH AMERICA
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 1.5746 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: PLATED ON RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 99167
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL COMP 4340 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE BALL AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MFR SOURCE CONTROLLING REFERENCE: 5907398
OVERALL OUTSIDE DIAMETER: 3.1493 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM
OVERALL WIDTH: 0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 4 HOLES EQUALLY SPACED ON INNER RING
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
SURFACE TREATMENT: SILVER RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
Related Searches:
26HKH208-104
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013388265
NSN
3110-01-338-8265
MFG
TIMKEN AEROSPACE & SUPER PRECISION DBA TIMKEN AEROSPACE DIV AEROSPACE
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 1.5746 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: PLATED ON RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 99167
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL COMP 4340 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE BALL AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MFR SOURCE CONTROLLING REFERENCE: 5907398
OVERALL OUTSIDE DIAMETER: 3.1493 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM
OVERALL WIDTH: 0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 4 HOLES EQUALLY SPACED ON INNER RING
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
SURFACE TREATMENT: SILVER RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
Related Searches:
5907398
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013388265
NSN
3110-01-338-8265
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 1.5746 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: PLATED ON RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 99167
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL COMP 4340 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE BALL AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MFR SOURCE CONTROLLING REFERENCE: 5907398
OVERALL OUTSIDE DIAMETER: 3.1493 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM
OVERALL WIDTH: 0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 4 HOLES EQUALLY SPACED ON INNER RING
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
SURFACE TREATMENT: SILVER RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
Related Searches:
R-208SD603M1A5P610LY378UB
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013388265
NSN
3110-01-338-8265
R-208SD603M1A5P610LY378UB
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013388265
NSN
3110-01-338-8265
MFG
NEW HAMPSHIRE BALL BEARINGS INC . DIV HITECH DIVISION
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 1.5746 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: PLATED ON RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 99167
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL COMP 4340 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE BALL AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MFR SOURCE CONTROLLING REFERENCE: 5907398
OVERALL OUTSIDE DIAMETER: 3.1493 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM
OVERALL WIDTH: 0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 4 HOLES EQUALLY SPACED ON INNER RING
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
SURFACE TREATMENT: SILVER RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
Related Searches:
V208KVMMSRA
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013388265
NSN
3110-01-338-8265
MFG
TIMKEN AEROSPACE INC
Description
ALIGNMENT TYPE: RIGID
BORE DIAMETER: 1.5746 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: PLATED ON RETAINER SILVER
INTERNAL CLEARANCE: 0.0006 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL
LOAD DIRECTION: RADIAL
MANUFACTURERS CODE: 99167
MATERIAL: STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL COMP 4340 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE BALL AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MFR SOURCE CONTROLLING REFERENCE: 5907398
OVERALL OUTSIDE DIAMETER: 3.1493 INCHES MINIMUM AND 3.1496 INCHES MAXIMUM
OVERALL WIDTH: 0.7037 INCHES MINIMUM AND 0.7087 INCHES MAXIMUM
RETAINER FABRICATION METHOD: PRESSED
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: 4 HOLES EQUALLY SPACED ON INNER RING
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
STYLE DESIGNATOR: 10A NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
SURFACE TREATMENT: SILVER RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
Related Searches:
BUS-CA-2500
BEARING,BALL,LINEAR MOTION
NSN, MFG P/N
3110013388266
NSN
3110-01-338-8266
BUS-CA-2500
BEARING,BALL,LINEAR MOTION
NSN, MFG P/N
3110013388266
NSN
3110-01-338-8266
MFG
LINEAR INDUSTRIES LTD.
Description
ALIGNMENT TYPE: RIGID
BORE SHAPE: STRAIGHT
DESIGN CONTROL REFERENCE: BUS-CA-2500
MANUFACTURERS CODE: 70094
OUTSIDE DIAMETER: 4.9687 INCHES NOMINAL
OVERALL LENGTH: 6.0000 INCHES NOMINAL
SURFACE FINISH: GROUND
THE MANUFACTURERS DATA:
Related Searches:
746058
PLATE,RETAINING,BEARING
NSN, MFG P/N
3110013388371
NSN
3110-01-338-8371
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
PLATE,RETAINING,BEARING
Related Searches:
510-13411-7
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110013389371
NSN
3110-01-338-9371
510-13411-7
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110013389371
NSN
3110-01-338-9371
MFG
THE BOEING COMPANY DBA BOEING
Description
MATERIAL: STEEL COMP 630 END PLATE STEEL COMP 440C OUTER RING STEEL COMP 630 STUD
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE END PLATE AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE STUD
NOMINAL THREAD SIZE: 0.500 INCHES
OUTER RING WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
OVERALL LENGTH: 2.0390 INCHES MINIMUM AND 2.0690 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM
SPECIAL FEATURES: TEFLON FABRIC SELF-LUBRICATING LINER BONDED TO RACE ID AND FACES
STUD DIAMETER: 0.5000 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM
STUD LENGTH: 1.2940 INCHES MINIMUM AND 1.3190 INCHES MAXIMUM
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: PASSIVATE END PLATE PASSIVATE OUTER RING PASSIVATE STUD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE END PLATE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STUD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HTR207-7
CAM FOLLOWER,NEEDLE BEARING
NSN, MFG P/N
3110013389371
NSN
3110-01-338-9371
MFG
U S BEARINGS
Description
MATERIAL: STEEL COMP 630 END PLATE STEEL COMP 440C OUTER RING STEEL COMP 630 STUD
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE END PLATE AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE STUD
NOMINAL THREAD SIZE: 0.500 INCHES
OUTER RING WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
OVERALL LENGTH: 2.0390 INCHES MINIMUM AND 2.0690 INCHES MAXIMUM
OVERALL OUTSIDE DIAMETER: 1.2495 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM
SPECIAL FEATURES: TEFLON FABRIC SELF-LUBRICATING LINER BONDED TO RACE ID AND FACES
STUD DIAMETER: 0.5000 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM
STUD LENGTH: 1.2940 INCHES MINIMUM AND 1.3190 INCHES MAXIMUM
STYLE DESIGNATOR: 440 CAM FOLLOWER
SURFACE TREATMENT: PASSIVATE END PLATE PASSIVATE OUTER RING PASSIVATE STUD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE END PLATE QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STUD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.7020 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3831301-2
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013390124
NSN
3110-01-339-0124
MFG
PARKER-HANNIFIN CORPORATION DBA CONTROL SYSTEMS DIVISION DIV CONTROL SYSTEMS DIVISION - MILITARY
Description
BEARING,BALL,ANNULAR
Related Searches:
3831301-2
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013390124
NSN
3110-01-339-0124
MFG
PARKER-HANNIFIN CORPORATION DBA CUSTOMER SUPPORT MILITARY DIVISION DIV CUSTOMER SUPPORT OPERATIONS
Description
BEARING,BALL,ANNULAR
Related Searches:
3831301-2
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110013390124
NSN
3110-01-339-0124
MFG
PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS
Description
BEARING,BALL,ANNULAR