My Quote Request
3120-00-287-7031
20 Products
235721
BEARING,SLEEVE
NSN, MFG P/N
3120002877031
NSN
3120-00-287-7031
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BODY INSIDE DIAMETER: 0.2080 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.4300 INCHES MINIMUM AND 0.4500 INCHES MAXIMUM
CORNER SHAPE: SQUARE ALL CORNERS
MATERIAL: STEEL COMP 1117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2100 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM
STYLE DESIGNATOR: 17C SOLID
SURFACE TREATMENT: CADMIUM OVERALL
Related Searches:
NAS75-4-014
BUSHING,SLEEVE
NSN, MFG P/N
3120002876995
NSN
3120-00-287-6995
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER
MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM
SPECIAL FEATURES: ID AND OD TO BE PARALLEL AND CONCENTRIC WITHIN 0.0030 TIR
SPECIFICATION/STANDARD DATA: 80205-NAS75 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 17C SOLID
SURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS75
BUSHING,SLEEVE
NSN, MFG P/N
3120002876996
NSN
3120-00-287-6996
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER
MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
SPECIAL FEATURES: ID AND OD TO BE PARALLEL AND CONCENTRIC WITHIN 0.0030 TIR
SPECIFICATION/STANDARD DATA: 80205-NAS75 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 17C SOLID
SURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS75-4-024
BUSHING,SLEEVE
NSN, MFG P/N
3120002876996
NSN
3120-00-287-6996
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER
MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
SPECIAL FEATURES: ID AND OD TO BE PARALLEL AND CONCENTRIC WITHIN 0.0030 TIR
SPECIFICATION/STANDARD DATA: 80205-NAS75 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 17C SOLID
SURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77A6-050
BUSHING,SLEEVE
NSN, MFG P/N
3120002877000
NSN
3120-00-287-7000
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: COPPER ALLOY 642 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-465 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.5520 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM
SPECIAL FEATURES: ID AND OD TO BE PARALLEL AND CONCENTRIC WITHIN 0.0030 TIR
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
Related Searches:
NAS77A6-50
BUSHING,SLEEVE
NSN, MFG P/N
3120002877000
NSN
3120-00-287-7000
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: COPPER ALLOY 642 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-465 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.5520 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM
SPECIAL FEATURES: ID AND OD TO BE PARALLEL AND CONCENTRIC WITHIN 0.0030 TIR
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
Related Searches:
NAS77
BUSHING,SLEEVE
NSN, MFG P/N
3120002877002
NSN
3120-00-287-7002
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.9020 INCHES MINIMUM AND 0.9170 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-4-085
BUSHING,SLEEVE
NSN, MFG P/N
3120002877002
NSN
3120-00-287-7002
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.9020 INCHES MINIMUM AND 0.9170 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-4-85
BUSHING,SLEEVE
NSN, MFG P/N
3120002877002
NSN
3120-00-287-7002
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.9020 INCHES MINIMUM AND 0.9170 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-4-038
BUSHING,SLEEVE
NSN, MFG P/N
3120002877004
NSN
3120-00-287-7004
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.4320 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-4-38
BUSHING,SLEEVE
NSN, MFG P/N
3120002877004
NSN
3120-00-287-7004
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0620 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.3756 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.4320 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77
BUSHING,SLEEVE
NSN, MFG P/N
3120002877009
NSN
3120-00-287-7009
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2120 INCHES MINIMUM AND 0.2270 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-6-016
BUSHING,SLEEVE
NSN, MFG P/N
3120002877009
NSN
3120-00-287-7009
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2120 INCHES MINIMUM AND 0.2270 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-6-16
BUSHING,SLEEVE
NSN, MFG P/N
3120002877009
NSN
3120-00-287-7009
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2120 INCHES MINIMUM AND 0.2270 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-6-018
BUSHING,SLEEVE
NSN, MFG P/N
3120002877010
NSN
3120-00-287-7010
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2320 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-6-18
BUSHING,SLEEVE
NSN, MFG P/N
3120002877010
NSN
3120-00-287-7010
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2320 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77
BUSHING,SLEEVE
NSN, MFG P/N
3120002877011
NSN
3120-00-287-7011
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.1720 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-6-012
BUSHING,SLEEVE
NSN, MFG P/N
3120002877011
NSN
3120-00-287-7011
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.1720 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
NAS77-6-12
BUSHING,SLEEVE
NSN, MFG P/N
3120002877011
NSN
3120-00-287-7011
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
(NON-CORE DATA) CHAMFER ANGLE: 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
(NON-CORE DATA) CHAMFER LENGTH: 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT DEPTH: 0.0050 INCHES MAXIMUM
(NON-CORE DATA) UNDERCUT WIDTH: 0.0150 INCHES MAXIMUM
BODY INSIDE DIAMETER: 0.3750 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.5006 INCHES MINIMUM AND 0.5013 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM
FLANGE WIDTH: 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
MATERIAL: STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.1720 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA: 80205-NAS77 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR: 22C SOLID
SURFACE FINISH: 100.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
235721
BEARING,SLEEVE
NSN, MFG P/N
3120002877031
NSN
3120-00-287-7031
MFG
NEWELL WINDOW FURNISHINGS CO
Description
BODY INSIDE DIAMETER: 0.2080 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.4300 INCHES MINIMUM AND 0.4500 INCHES MAXIMUM
CORNER SHAPE: SQUARE ALL CORNERS
MATERIAL: STEEL COMP 1117 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH: 0.2100 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM
STYLE DESIGNATOR: 17C SOLID
SURFACE TREATMENT: CADMIUM OVERALL