My Quote Request
3120-01-524-8737
20 Products
244587
BUSHING,SLEEVE
NSN, MFG P/N
3120015248737
NSN
3120-01-524-8737
MFG
ALLIED SYSTEMS COMPANY
Description
BODY INSIDE DIAMETER: 2.2500 INCHES NOMINAL
BODY OUTSIDE DIAMETER: 2.0000 INCHES NOMINAL
III END ITEM IDENTIFICATION: CRANE
OVERALL LENGTH: 0.8750 INCHES NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END
Related Searches:
20735B003
BEARING,SLEEVE
NSN, MFG P/N
3120015247823
NSN
3120-01-524-7823
MFG
DUBIED EDOUARD ET CIE SA
Description
BODY INSIDE DIAMETER: 2.0040 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 2.3765 INCHES MINIMUM AND 2.3775 INCHES MAXIMUM
CORNER SHAPE: UNDERCUT ALL CORNERS
FLANGE OUTSIDE DIAMETER: 2.9900 INCHES MINIMUM AND 3.0010 INCHES MAXIMUM
FLANGE WIDTH: 0.1870 INCHES NOMINAL
III END ITEM IDENTIFICATION: DOGGING ASSY BRIDGE RAMP FWD AND AFT
MATERIAL: STEEL CORROSION RESISTING OVERALL
OVERALL LENGTH: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM
STYLE DESIGNATOR: 22C SOLID
Related Searches:
20735B003 REV H FN 9
BEARING,SLEEVE
NSN, MFG P/N
3120015247823
NSN
3120-01-524-7823
MFG
JERED LLC
Description
BODY INSIDE DIAMETER: 2.0040 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 2.3765 INCHES MINIMUM AND 2.3775 INCHES MAXIMUM
CORNER SHAPE: UNDERCUT ALL CORNERS
FLANGE OUTSIDE DIAMETER: 2.9900 INCHES MINIMUM AND 3.0010 INCHES MAXIMUM
FLANGE WIDTH: 0.1870 INCHES NOMINAL
III END ITEM IDENTIFICATION: DOGGING ASSY BRIDGE RAMP FWD AND AFT
MATERIAL: STEEL CORROSION RESISTING OVERALL
OVERALL LENGTH: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM
STYLE DESIGNATOR: 22C SOLID
Related Searches:
KNRJ32-UDV-032-5
BEARING,SLEEVE
NSN, MFG P/N
3120015247823
NSN
3120-01-524-7823
MFG
KAMATICS CORPORATION
Description
BODY INSIDE DIAMETER: 2.0040 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 2.3765 INCHES MINIMUM AND 2.3775 INCHES MAXIMUM
CORNER SHAPE: UNDERCUT ALL CORNERS
FLANGE OUTSIDE DIAMETER: 2.9900 INCHES MINIMUM AND 3.0010 INCHES MAXIMUM
FLANGE WIDTH: 0.1870 INCHES NOMINAL
III END ITEM IDENTIFICATION: DOGGING ASSY BRIDGE RAMP FWD AND AFT
MATERIAL: STEEL CORROSION RESISTING OVERALL
OVERALL LENGTH: 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM
STYLE DESIGNATOR: 22C SOLID
Related Searches:
AS81934
BEARING,SLEEVE
NSN, MFG P/N
3120015248107
NSN
3120-01-524-8107
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BODY INSIDE DIAMETER: 0.5630 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.6887 INCHES MINIMUM AND 0.6892 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: M81934-2-09A007
FLANGE OUTSIDE DIAMETER: 1.1050 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
FLANGE WIDTH: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
III END ITEM IDENTIFICATION: ASTOR RADAR
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER ALUMINUM ALLOY 2024 OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3 T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
OVERALL LENGTH: 0.3287 INCHES MINIMUM AND 0.3437 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 22C SOLID
SURFACE TREATMENT: ANODIZE OR CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 T1 IR T2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
M81934-2-09A007
BEARING,SLEEVE
NSN, MFG P/N
3120015248107
NSN
3120-01-524-8107
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
BODY INSIDE DIAMETER: 0.5630 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.6887 INCHES MINIMUM AND 0.6892 INCHES MAXIMUM
CORNER SHAPE: SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: M81934-2-09A007
FLANGE OUTSIDE DIAMETER: 1.1050 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
FLANGE WIDTH: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
III END ITEM IDENTIFICATION: ASTOR RADAR
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER ALUMINUM ALLOY 2024 OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3 T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
OVERALL LENGTH: 0.3287 INCHES MINIMUM AND 0.3437 INCHES MAXIMUM
SPEC/STD CONTROLLING DATA:
STYLE DESIGNATOR: 22C SOLID
SURFACE TREATMENT: ANODIZE OR CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 T1 IR T2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
0,2MS-57153-10-T
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248130
NSN
3120-01-524-8130
0,2MS-57153-10-T
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248130
NSN
3120-01-524-8130
MFG
TRELLEBORG SEALING SOLUTIONS US INC. DBA TRELLEBORG SEALING SOLUTIONS FORT WAYNE
Description
BORE DIAMETER: 15.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: TO PREVENT METAL TO METAL CONTACT BETWEEN SHAFT AND HOUSING AND PREVENT INGRESS OF DIRT, WHILST ABSORBING SHOCK LOADS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SLYDRING 2
III SUPPLEMENTARY FEATURES: PLAIN, PTFE BASED, THERMOPLASTIC STRIP CUT AND FORMED TO ASSEMBLED REQUIREMENTS; OPER TEMP RANGE -60 DEG C TO +200 DEG C
INNER MEMBER WIDTH: 15.0 MILLIMETERS NOMINAL
MATERIAL: PLASTIC OVERALL
OUTER MEMBER OUTSIDE DIAMETER: 15.2 MILLIMETERS NOMINAL
OUTER MEMBER WIDTH: 200.0 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 8B WITHOUT INSERT OR LINER
Related Searches:
0,2MS-57153-10-T
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248130
NSN
3120-01-524-8130
0,2MS-57153-10-T
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248130
NSN
3120-01-524-8130
MFG
TRELLEBORG SEALING SOLUTIONS UK LTD
Description
BORE DIAMETER: 15.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: TO PREVENT METAL TO METAL CONTACT BETWEEN SHAFT AND HOUSING AND PREVENT INGRESS OF DIRT, WHILST ABSORBING SHOCK LOADS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SLYDRING 2
III SUPPLEMENTARY FEATURES: PLAIN, PTFE BASED, THERMOPLASTIC STRIP CUT AND FORMED TO ASSEMBLED REQUIREMENTS; OPER TEMP RANGE -60 DEG C TO +200 DEG C
INNER MEMBER WIDTH: 15.0 MILLIMETERS NOMINAL
MATERIAL: PLASTIC OVERALL
OUTER MEMBER OUTSIDE DIAMETER: 15.2 MILLIMETERS NOMINAL
OUTER MEMBER WIDTH: 200.0 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 8B WITHOUT INSERT OR LINER
Related Searches:
AM-04-00-20206
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248130
NSN
3120-01-524-8130
AM-04-00-20206
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248130
NSN
3120-01-524-8130
MFG
BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
Description
BORE DIAMETER: 15.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: TO PREVENT METAL TO METAL CONTACT BETWEEN SHAFT AND HOUSING AND PREVENT INGRESS OF DIRT, WHILST ABSORBING SHOCK LOADS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SLYDRING 2
III SUPPLEMENTARY FEATURES: PLAIN, PTFE BASED, THERMOPLASTIC STRIP CUT AND FORMED TO ASSEMBLED REQUIREMENTS; OPER TEMP RANGE -60 DEG C TO +200 DEG C
INNER MEMBER WIDTH: 15.0 MILLIMETERS NOMINAL
MATERIAL: PLASTIC OVERALL
OUTER MEMBER OUTSIDE DIAMETER: 15.2 MILLIMETERS NOMINAL
OUTER MEMBER WIDTH: 200.0 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 8B WITHOUT INSERT OR LINER
Related Searches:
LP122-PM2515DX
BEARING,SLEEVE
NSN, MFG P/N
3120015248140
NSN
3120-01-524-8140
MFG
BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
Description
BODY INSIDE DIAMETER: 24.9 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER: 25.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: TO REDUCE FRICTION AND WAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BUSH
III SUPPLEMENTARY FEATURES: BEARING, PLAIN IS A COMPOSITE MATERIAL SPLIT BEARING INTENDED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; SERVICE TEMP RANGE -40 TO +130 DEG C; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND STEEL OVERALL
OVERALL LENGTH: 26.6000 INCHES NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END
Related Searches:
PM 2515DX
BEARING,SLEEVE
NSN, MFG P/N
3120015248140
NSN
3120-01-524-8140
MFG
GLACIER VANDERVELL INC
Description
BODY INSIDE DIAMETER: 24.9 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER: 25.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: TO REDUCE FRICTION AND WAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BUSH
III SUPPLEMENTARY FEATURES: BEARING, PLAIN IS A COMPOSITE MATERIAL SPLIT BEARING INTENDED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; SERVICE TEMP RANGE -40 TO +130 DEG C; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND STEEL OVERALL
OVERALL LENGTH: 26.6000 INCHES NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END
Related Searches:
PM 2515DX
BEARING,SLEEVE
NSN, MFG P/N
3120015248140
NSN
3120-01-524-8140
MFG
GGB GERMANY GMBH AND CO KG
Description
BODY INSIDE DIAMETER: 24.9 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER: 25.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: TO REDUCE FRICTION AND WAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BUSH
III SUPPLEMENTARY FEATURES: BEARING, PLAIN IS A COMPOSITE MATERIAL SPLIT BEARING INTENDED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; SERVICE TEMP RANGE -40 TO +130 DEG C; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND STEEL OVERALL
OVERALL LENGTH: 26.6000 INCHES NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END
Related Searches:
LP122-PM1212DX
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248142
NSN
3120-01-524-8142
LP122-PM1212DX
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248142
NSN
3120-01-524-8142
MFG
BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
Description
BORE DIAMETER: 4.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: SPLIT BEARING INTENDED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; REDUCES FRICTION AND WEAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING, PLAIN
III SUPPLEMENTARY FEATURES: OPER TEMP RANGE: -40 TO +130 DEG C; MATERIAL IS COMPOSITE, POROUS BRONZE SINTER BONDED TO A STEEL BACKING AND IMPREGNATED AND LINED WITH AN ACETAL COPOLYMER BEARING SURFACE; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND PLASTIC AND STEEL OVERALL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
Related Searches:
PM 1212DX
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248142
NSN
3120-01-524-8142
PM 1212DX
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248142
NSN
3120-01-524-8142
MFG
GLACIER VANDERVELL INC
Description
BORE DIAMETER: 4.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: SPLIT BEARING INTENDED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; REDUCES FRICTION AND WEAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING, PLAIN
III SUPPLEMENTARY FEATURES: OPER TEMP RANGE: -40 TO +130 DEG C; MATERIAL IS COMPOSITE, POROUS BRONZE SINTER BONDED TO A STEEL BACKING AND IMPREGNATED AND LINED WITH AN ACETAL COPOLYMER BEARING SURFACE; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND PLASTIC AND STEEL OVERALL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
Related Searches:
PM 1212DX
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248142
NSN
3120-01-524-8142
PM 1212DX
BEARING,PLAIN,SELF-ALIGNING
NSN, MFG P/N
3120015248142
NSN
3120-01-524-8142
MFG
GGB GERMANY GMBH AND CO KG
Description
BORE DIAMETER: 4.0 MILLIMETERS NOMINAL
III END ITEM IDENTIFICATION: LW155 HOWITZER
III FUNCTIONAL DESCRIPTION: SPLIT BEARING INTENDED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; REDUCES FRICTION AND WEAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BEARING, PLAIN
III SUPPLEMENTARY FEATURES: OPER TEMP RANGE: -40 TO +130 DEG C; MATERIAL IS COMPOSITE, POROUS BRONZE SINTER BONDED TO A STEEL BACKING AND IMPREGNATED AND LINED WITH AN ACETAL COPOLYMER BEARING SURFACE; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND PLASTIC AND STEEL OVERALL
OVERALL WIDTH: 14.0 MILLIMETERS NOMINAL
Related Searches:
83309-37-PT27
BUSHING,SLEEVE
NSN, MFG P/N
3120015248225
NSN
3120-01-524-8225
MFG
VELAN VALVE CORPORATION DIV VELAN VALVE CORPORATION
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 83309-37-PT27
MANUFACTURERS CODE: 57574
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATION
THE MANUFACTURERS DATA:
Related Searches:
N9623
BUSHING,SLEEVE
NSN, MFG P/N
3120015248408
NSN
3120-01-524-8408
MFG
C. E. NIEHOFF & CO.
Description
III END ITEM IDENTIFICATION: 2320013539098
Related Searches:
LP122-PM2520DX
BEARING,SLEEVE
NSN, MFG P/N
3120015248597
NSN
3120-01-524-8597
MFG
BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
Description
BODY INSIDE DIAMETER: 24.9 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER: 25.0 MILLIMETERS NOMINAL
III FUNCTIONAL DESCRIPTION: TO REDUCE FRICTION AND WEAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III SUPPLEMENTARY FEATURES: BEARING, PLAIN IS A COMPOSITE MATERIAL SPLIT BEARING INDENTED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; SERVICE TEMP RANGE: -40 TO +130 DEG C; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND STEEL OVERALL
OVERALL LENGTH: 25.0 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END
Related Searches:
PM 2520DX
BEARING,SLEEVE
NSN, MFG P/N
3120015248597
NSN
3120-01-524-8597
MFG
GLACIER VANDERVELL INC
Description
BODY INSIDE DIAMETER: 24.9 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER: 25.0 MILLIMETERS NOMINAL
III FUNCTIONAL DESCRIPTION: TO REDUCE FRICTION AND WEAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III SUPPLEMENTARY FEATURES: BEARING, PLAIN IS A COMPOSITE MATERIAL SPLIT BEARING INDENTED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; SERVICE TEMP RANGE: -40 TO +130 DEG C; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND STEEL OVERALL
OVERALL LENGTH: 25.0 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END
Related Searches:
PM 2520DX
BEARING,SLEEVE
NSN, MFG P/N
3120015248597
NSN
3120-01-524-8597
MFG
GGB GERMANY GMBH AND CO KG
Description
BODY INSIDE DIAMETER: 24.9 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER: 25.0 MILLIMETERS NOMINAL
III FUNCTIONAL DESCRIPTION: TO REDUCE FRICTION AND WEAR OF THE WORKING JOURNAL, WITH MARGINAL LUBRICATION
III SUPPLEMENTARY FEATURES: BEARING, PLAIN IS A COMPOSITE MATERIAL SPLIT BEARING INDENTED FOR THE RETENTION OF GREASE AND IS SUPPLIED IN A PREFINISHED CONDITION; SERVICE TEMP RANGE: -40 TO +130 DEG C; OPERATING LOADS OF UP TO 140N/MM2
MATERIAL: BRONZE LEADED AND STEEL OVERALL
OVERALL LENGTH: 25.0 MILLIMETERS NOMINAL
STYLE DESIGNATOR: 17A-1 SPLIT INTERNAL FLANGE ONE END