My Quote Request
4720-00-124-1489
20 Products
8438252
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001241489
NSN
4720-00-124-1489
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
BURST TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
DESIGN CONTROL REFERENCE: 8438252
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING SPEC/STD DATA: MS33656 STANDARD
FIRST END NOMINAL THREAD SIZE: 0.438 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C14 INVERTED FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD QUANTITY PER INCH: 20
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: MIL-H-13531 SPECIFICATION
INNER CONVEYING TUBE MATERIAL: PLASTIC
INSIDE DIAMETER: 0.242 INCHES MINIMUM AND 0.273 INCHES MAXIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED STEEL WIRE
MANUFACTURERS CODE: 19200
MAXIMUM OPERATING PRESSURE: 2800.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 46.180 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID
MINIMUM INSIDE BENDING RADIUS: NOT RATED
OUTSIDE DIAMETER: 0.656 INCHES MINIMUM AND 0.718 INCHES MAXIMUM
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TEMP RATING: NOT RATED
Related Searches:
S1053K24T144-00
HOSE,AIR DUCT
NSN, MFG P/N
4720001239149
NSN
4720-00-123-9149
MFG
CESSNA AIRCRAFT COMPANY
Description
CONNECTION TYPE: PLAIN FIRST END
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
INSIDE DIAMETER: 3.030 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER BUTYL 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY STEEL REINFORCING WIRE
MEASURING METHOD AND LENGTH: 144.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
170005-8CR0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
170005-8CR0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MFG
PARKER-HANNIFIN CORPORATION DBA STRATOFLEX PRODUCTS DIVISION DIV STRATOFLEX PRODUCTS DIVISION
Description
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.750 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNJF
HOSE OR TUBING SPEC/STD DATA: SAE AS604,SIZE 8-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, TETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.391 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
LAYER COMPOSITION AND LOCATION: 2ND LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: 3RD LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.000 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 5.750 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.765 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.750 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNJF
SPECIFICATION/STANDARD DATA: 81343-AS629 GOVERNMENT STANDARD
TEMP RATING: -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT
Related Searches:
66000208-0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
66000208-0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MFG
SMITHS TUBULAR SYSTEMS-LACONIA INC.
Description
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.750 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNJF
HOSE OR TUBING SPEC/STD DATA: SAE AS604,SIZE 8-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, TETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.391 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
LAYER COMPOSITION AND LOCATION: 2ND LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: 3RD LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.000 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 5.750 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.765 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.750 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNJF
SPECIFICATION/STANDARD DATA: 81343-AS629 GOVERNMENT STANDARD
TEMP RATING: -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT
Related Searches:
AS604
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.750 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNJF
HOSE OR TUBING SPEC/STD DATA: SAE AS604,SIZE 8-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, TETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.391 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
LAYER COMPOSITION AND LOCATION: 2ND LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: 3RD LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.000 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 5.750 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.765 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.750 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNJF
SPECIFICATION/STANDARD DATA: 81343-AS629 GOVERNMENT STANDARD
TEMP RATING: -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT
Related Searches:
AS629-08-0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
AS629-08-0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.750 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNJF
HOSE OR TUBING SPEC/STD DATA: SAE AS604,SIZE 8-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, TETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.391 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
LAYER COMPOSITION AND LOCATION: 2ND LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: 3RD LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.000 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 5.750 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.765 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.750 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNJF
SPECIFICATION/STANDARD DATA: 81343-AS629 GOVERNMENT STANDARD
TEMP RATING: -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT
Related Searches:
MS27365H0186
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MS27365H0186
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.750 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNJF
HOSE OR TUBING SPEC/STD DATA: SAE AS604,SIZE 8-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, TETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.391 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
LAYER COMPOSITION AND LOCATION: 2ND LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: 3RD LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.000 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 5.750 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.765 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.750 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNJF
SPECIFICATION/STANDARD DATA: 81343-AS629 GOVERNMENT STANDARD
TEMP RATING: -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT
Related Searches:
MS27365H0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MS27365H0190
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240707
NSN
4720-00-124-0707
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FEATURES PROVIDED: ELECTROSTATIC DISCHARGE CAPABILITY
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.750 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNJF
HOSE OR TUBING SPEC/STD DATA: SAE AS604,SIZE 8-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, TETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.391 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
LAYER COMPOSITION AND LOCATION: 2ND LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: 3RD LAYER SPIRALLY LAID STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.000 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 5.750 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.765 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING PASSIVATED
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.750 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNJF
SPECIFICATION/STANDARD DATA: 81343-AS629 GOVERNMENT STANDARD
TEMP RATING: -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT
Related Searches:
16C16FJS48
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
MFG
ANCHOR SWAN CORP
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
MFG
ANCHOR SWAN CORP
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
MFG
VEYANCE TECHNOLOGIES, INC.
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
MFG
ANCHOR SWAN CORP SUB OF AMERACE CORP
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
16C16FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
MFG
GOODYEAR TIRE AND RUBBER CO THE
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
16C1FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
16C1FJS48IN
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240721
NSN
4720-00-124-0721
MFG
VEYANCE TECHNOLOGIES INC. DIV ENGINEERED PRODUCTS
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
130S5277-0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
130S5277-0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
MFG
SMITHS TUBULAR SYSTEMS-LACONIA INC.
Description
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
DESIGN CONTROL REFERENCE: C832B6-0087
EXTERIOR COLOR: NATURAL
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
FIRST END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HYDROSTATIC TEST PRESSURE: 3000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.298 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MANUFACTURERS CODE: 81755
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 8.875 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.469 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 321/SAE 30321
SECOND END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
SECOND END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
SECOND END FLOW ANGLE IN DEG: 45.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 2B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT
VACUUM IN TORR: 50.8
Related Searches:
C832B6-0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
C832B6-0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
DESIGN CONTROL REFERENCE: C832B6-0087
EXTERIOR COLOR: NATURAL
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
FIRST END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HYDROSTATIC TEST PRESSURE: 3000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.298 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MANUFACTURERS CODE: 81755
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 8.875 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.469 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 321/SAE 30321
SECOND END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
SECOND END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
SECOND END FLOW ANGLE IN DEG: 45.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 2B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT
VACUUM IN TORR: 50.8
Related Searches:
G002DBD0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
G002DBD0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
MFG
PARKER-HANNIFIN CORPORATION DBA STRATOFLEX PRODUCTS DIVISION DIV STRATOFLEX PRODUCTS DIVISION
Description
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
DESIGN CONTROL REFERENCE: C832B6-0087
EXTERIOR COLOR: NATURAL
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
FIRST END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HYDROSTATIC TEST PRESSURE: 3000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.298 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MANUFACTURERS CODE: 81755
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 8.875 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.469 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 321/SAE 30321
SECOND END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
SECOND END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
SECOND END FLOW ANGLE IN DEG: 45.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 2B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT
VACUUM IN TORR: 50.8
Related Searches:
R25005-6-0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
R25005-6-0087
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001240730
NSN
4720-00-124-0730
MFG
PARKER-HANNIFIN CORPORATION DBA STRATOFLEX PRODUCT DIVISION DIV STRATOFLEX PRODUCT DIVISION
Description
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
DESIGN CONTROL REFERENCE: C832B6-0087
EXTERIOR COLOR: NATURAL
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
FIRST END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HYDROSTATIC TEST PRESSURE: 3000.0 POUNDS PER SQUARE INCH
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.298 INCHES MINIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MANUFACTURERS CODE: 81755
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 8.875 INCHES NOMINAL WORKING
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT
OUTSIDE DIAMETER: 0.469 INCHES MAXIMUM
OUTSIDE SURFACE TREATMENT: PASSIVATED
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: NIPPLE STEEL, FED STD 66, AISI 321/SAE 30321
SECOND END FITTING/COMPONENT AND MATERIAL: NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024
SECOND END FITTING/COMPONENT AND MATERIAL: SOCKET STEEL, FED STD 66, AISI 304/SAE 30304
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NIPPLE PASSIVATED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: NUT ANODIZED
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT: SOCKET PASSIVATED
SECOND END FLOW ANGLE IN DEG: 45.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 2B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT
VACUUM IN TORR: 50.8
Related Searches:
8438251
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001241480
NSN
4720-00-124-1480
MFG
ARMY UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL
Description
BURST TEST PRESSURE: 20000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END NOMINAL THREAD SIZE: 0.438 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: MIL-H-13531,TYPE 2 CLASS A SPECIFICATION
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.242 INCHES MINIMUM AND 0.273 INCHES MAXIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 5000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.375 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: AIR AND FUEL/OIL, HYDROCARBON AND GREASE AND WATER
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
OUTSIDE DIAMETER: 0.656 INCHES MINIMUM AND 0.718 INCHES MAXIMUM
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FLOW ANGLE IN DEG: 45.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 2B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
8438251
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720001241480
NSN
4720-00-124-1480
MFG
ARMY UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL
Description
BURST TEST PRESSURE: 20000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
FIRST END NOMINAL THREAD SIZE: 0.438 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 2B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: MIL-H-13531,TYPE 2 CLASS A SPECIFICATION
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.242 INCHES MINIMUM AND 0.273 INCHES MAXIMUM
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 5000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 19.375 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: AIR AND FUEL/OIL, HYDROCARBON AND GREASE AND WATER
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
OUTSIDE DIAMETER: 0.656 INCHES MINIMUM AND 0.718 INCHES MAXIMUM
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL, CORROSION RESISTING
SECOND END FLOW ANGLE IN DEG: 45.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 2B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT