My Quote Request
4720-01-294-3193
20 Products
713426-1.00-051-4
HOSE,AIR DUCT
NSN, MFG P/N
4720012943193
NSN
4720-01-294-3193
MFG
ARROWHEAD PRODUCTS CORPORATION
Description
(NON-CORE DATA) TEMP RANGE: -65.0 TO 250.0 DEG FAHRENHEIT
CONNECTION STYLE: C3 ROUND FIRST END
CONNECTION TYPE: SOFT FIRST END
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 1.000 INCHES NOMINAL FIRST END
END OVERALL LENGTH: 1.000 INCHES NOMINAL FIRST END
EXTERNAL OPERATING PRESSURE: 6.0 POUNDS PER SQUARE INCH
INSIDE DIAMETER: 1.000 INCHES NOMINAL FIRST END
MATERIAL: PLASTIC POLYAMIDE AND RUBBER SILICONE CLASS Q 1ST PLY PLASTIC POLYAMIDE 2ND PLY
MAXIMUM OPERATING PRESSURE: 12.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 12.750 INCHES NOMINAL OVERALL
MINIMUM INSIDE BENDING RADIUS: 1.000 INCHES
SPECIAL FEATURES: NOMEX FABRIC PLIES,NONMETALLIC HELICAL WIRE REINFORCEMENT ZYTEL 103
WALL THICKNESS: 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
Related Searches:
L112579
HOSE,PREFORMED
NSN, MFG P/N
4720012941861
NSN
4720-01-294-1861
MFG
CNH AMERICA LLC
Description
DESIGN CONTROL REFERENCE: L112579
MANUFACTURERS CODE: 10988
SPECIAL FEATURES: USED ON J.I. CASE ROUGH TERRAIN 6000LB FORKLIFT TRUCK,MODEL M6KN
STYLE DESIGNATOR: C5 SINGLE BEND
THE MANUFACTURERS DATA:
Related Searches:
5R6247
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012942586
NSN
4720-01-294-2586
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
HOSE ASSEMBLY,NONMETALLIC
Related Searches:
0212-4.000
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
FLEXIBLE TECHNOLOGIES INC
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
0214-0400-0410-20
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
FLEXIBLE TECHNOLOGIES INC
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
6196495
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
NAVAL SEA SYSTEMS COMMAND
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
CEETS-16-108-8
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
HBD INDUSTRIES INC DIV HBD/THERMOID INC
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
FLX100132010808
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
FLEXFAB LLC
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
MIL320132010808
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
FLEXFAB LLC
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
WC021-4.00-108-8A
HOSE,AIR DUCT
NSN, MFG P/N
4720012942589
NSN
4720-01-294-2589
MFG
ARROWHEAD PRODUCTS CORPORATION
Description
CONNECTION STYLE: C3 ROUND BOTH ENDS
CONNECTION TYPE: SOFT BOTH ENDS
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 4.000 INCHES NOMINAL BOTH ENDS
END OVERALL LENGTH: 2.000 INCHES NOMINAL BOTH ENDS
INSIDE DIAMETER: 4.000 INCHES NOMINAL FIRST END
MATERIAL: FIBERGLASS AND RUBBER SILICONE CLASS Q 1ST PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 2ND PLY FIBERGLASS AND RUBBER SILICONE CLASS Q 3RD PLY STEEL REINFORCING WIRE
MAXIMUM OPERATING PRESSURE: 31.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 27.000 INCHES NOMINAL OVERALL
STYLE DESIGNATOR: A4 HELICALLY WOUND CONTINUOUS WIRE SUPPORTED
Related Searches:
6604662
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
MFG
TRAK INTERNATIONAL
Description
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: SAE J517,100R1,TYPE AT-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH
III END ITEM IDENTIFICATION: 3930-01-158-0849
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.250 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 40.500 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
6604662
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
MFG
JLG INDUSTRIES INC . DBA MILITARY / GOVERNMENT DIVISION
Description
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: SAE J517,100R1,TYPE AT-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH
III END ITEM IDENTIFICATION: 3930-01-158-0849
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.250 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 40.500 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
F410639-6-4-4-40.50
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
F410639-6-4-4-40.50
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
MFG
PARKER-HANNIFIN CORPORATION DBA HOSE PRODUCTS DIV DIV HOSE PRODUCTS DIVISION
Description
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: SAE J517,100R1,TYPE AT-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH
III END ITEM IDENTIFICATION: 3930-01-158-0849
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.250 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 40.500 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
F4210639-6-4-4-40.50
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
F4210639-6-4-4-40.50
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
MFG
PARKER-HANNIFIN CORPORATION DBA STRATOFLEX PRODUCTS DIVISION DIV STRATOFLEX PRODUCTS DIVISION
Description
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: SAE J517,100R1,TYPE AT-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH
III END ITEM IDENTIFICATION: 3930-01-158-0849
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.250 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 40.500 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
FL4030GEE0404
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
FL4030GEE0404
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
MFG
EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS
Description
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: SAE J517,100R1,TYPE AT-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH
III END ITEM IDENTIFICATION: 3930-01-158-0849
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.250 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 40.500 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
FL6068GEE0404AA
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
FL6068GEE0404AA
HOSE ASSEMBLY,NONMETALLIC
NSN, MFG P/N
4720012943161
NSN
4720-01-294-3161
MFG
EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS
Description
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
FIRST END CONNECTION DESIGN: STRAIGHT
FIRST END CONNECTION TYPE: THREADED INTERNAL TUBE
FIRST END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
FIRST END NOMINAL THREAD SIZE: 0.562 INCHES
FIRST END SEAT ANGLE IN DEG: 37.0
FIRST END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
FIRST END SWIVEL ACTION CAPABILITY: NOT INCLUDED
FIRST END THREAD CLASS: 3B
FIRST END THREAD DIRECTION: RIGHT-HAND
FIRST END THREAD SERIES DESIGNATOR: UNF
HOSE OR TUBING SPEC/STD DATA: SAE J517,100R1,TYPE AT-81343 STANDARD
HYDROSTATIC TEST PRESSURE: 5500.0 POUNDS PER SQUARE INCH
III END ITEM IDENTIFICATION: 3930-01-158-0849
INNER CONVEYING TUBE MATERIAL: RUBBER, SYNTHETIC
INSIDE DIAMETER: 0.250 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC
MAXIMUM OPERATING PRESSURE: 2750.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 40.500 INCHES NOMINAL OVERALL
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL
SECOND END CONNECTION DESIGN: ELBOW
SECOND END CONNECTION TYPE: THREADED INTERNAL TUBE
SECOND END FITTING/COMPONENT AND MATERIAL: COMPLETE FITTING STEEL
SECOND END FLOW ANGLE IN DEG: 90.0
SECOND END NOMINAL THREAD SIZE: 0.438 INCHES
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
SECOND END SEAT ANGLE IN DEG: 37.0
SECOND END STYLE DESIGNATOR: C3 SWIVEL NUT FLARE
SECOND END SWIVEL ACTION CAPABILITY: NOT INCLUDED
SECOND END THREAD CLASS: 3B
SECOND END THREAD DIRECTION: RIGHT-HAND
SECOND END THREAD SERIES DESIGNATOR: UNF
TEMP RATING: -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT
Related Searches:
910-10
HOSE,NONMETALLIC
NSN, MFG P/N
4720012943162
NSN
4720-01-294-3162
MFG
PARKER-HANNIFIN CORPORATION DBA PARFLEX DIV DIV PARFLEX DIVISION
Description
BURST TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.500 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES
OUTSIDE DIAMETER: 0.625 INCHES NOMINAL
TEMP RATING: -100.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT
Related Searches:
910-10
HOSE,NONMETALLIC
NSN, MFG P/N
4720012943162
NSN
4720-01-294-3162
MFG
PARKER-HANNIFIN CORPORATION DBA STRATOFLEX PRODUCTS DIVISION DIV STRATOFLEX PRODUCTS DIVISION
Description
BURST TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.500 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES
OUTSIDE DIAMETER: 0.625 INCHES NOMINAL
TEMP RATING: -100.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT
Related Searches:
919-10
HOSE,NONMETALLIC
NSN, MFG P/N
4720012943162
NSN
4720-01-294-3162
MFG
PARKER-HANNIFIN CORPORATION DBA TUBE FITTINGS DIVISION DIV TUBE FITTINGS DIVISION
Description
BURST TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH
CROSS-SECTIONAL SHAPE STYLE: 1 ROUND
EXTERIOR COLOR: ANY ACCEPTABLE
INNER CONVEYING TUBE MATERIAL: PLASTIC, POLYTETRAFLUOROETHYLENE
INSIDE DIAMETER: 0.500 INCHES NOMINAL
INSIDE SURFACE CONDITION: SMOOTH
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
MAXIMUM OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES
OUTSIDE DIAMETER: 0.625 INCHES NOMINAL
TEMP RATING: -100.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT
Related Searches:
C9601
HOSE,AIR DUCT
NSN, MFG P/N
4720012943193
NSN
4720-01-294-3193
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) TEMP RANGE: -65.0 TO 250.0 DEG FAHRENHEIT
CONNECTION STYLE: C3 ROUND FIRST END
CONNECTION TYPE: SOFT FIRST END
CROSS-SECTIONAL SHAPE STYLE: B3 ROUND
END INSIDE DIAMETER: 1.000 INCHES NOMINAL FIRST END
END OVERALL LENGTH: 1.000 INCHES NOMINAL FIRST END
EXTERNAL OPERATING PRESSURE: 6.0 POUNDS PER SQUARE INCH
INSIDE DIAMETER: 1.000 INCHES NOMINAL FIRST END
MATERIAL: PLASTIC POLYAMIDE AND RUBBER SILICONE CLASS Q 1ST PLY PLASTIC POLYAMIDE 2ND PLY
MAXIMUM OPERATING PRESSURE: 12.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH: 12.750 INCHES NOMINAL OVERALL
MINIMUM INSIDE BENDING RADIUS: 1.000 INCHES
SPECIAL FEATURES: NOMEX FABRIC PLIES,NONMETALLIC HELICAL WIRE REINFORCEMENT ZYTEL 103
WALL THICKNESS: 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM