My Quote Request
4810-00-328-3472
20 Products
35-02910
HOUSING,VALVE
NSN, MFG P/N
4810003283472
NSN
4810-00-328-3472
MFG
HYDRO-AIRE INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: ALUMINUM;ANODIZED;2.500 IN. LG;1.500 IN. WIDTH;1.406 IN. HIGTH;TWO PORTS INTERNAL 0.375-20 UN THD;0NE PORT INTERNAL 0.875 IN. DIA; FOUR MTG HOLES 0.188 IN. DIA;TWO MTG HOLES 0.281 IN. DIA
Related Searches:
35-02913
SEAT,VALVE
NSN, MFG P/N
4810003283473
NSN
4810-00-328-3473
MFG
HYDRO-AIRE INC.
Description
BODY INSIDE DIAMETER: 0.350 INCHES NOMINAL
FLANGE DIAMETER: 0.855 INCHES NOMINAL
FLANGE SEAT TO DISK END HEIGHT: 0.488 INCHES NOMINAL
HARDNESS RATING: NOT RATED
MATERIAL: STEEL OVERALL
NOMINAL THREAD SIZE: 0.190 INCHES SINGLE THREADED PORTION
SEATING SURFACE SHAPE: FLAT
STYLE DESIGNATOR: B2 THREADED FLANGED
THREAD CLASS: 2A SINGLE THREADED PORTION
THREAD LENGTH: 0.655 INCHES NOMINAL SINGLE THREADED PORTION
THREAD SERIES DESIGNATOR: UNF SINGLE THREADED PORTION
UNDER FLANGE HEIGHT: 1.150 INCHES NOMINAL
Related Searches:
B704
SLEEVE AND SLIDE,DIRECTIONAL CONTROL LINEAR VALVE
NSN, MFG P/N
4810003283564
NSN
4810-00-328-3564
B704
SLEEVE AND SLIDE,DIRECTIONAL CONTROL LINEAR VALVE
NSN, MFG P/N
4810003283564
NSN
4810-00-328-3564
MFG
DOVER DIVERSIFIED DE INC.
Description
III END ITEM IDENTIFICATION: AIRCRAFT HYDRAULIC SYSTEMS
SLEEVE MATERIAL: STEEL CORROSION RESISTING
SPECIAL FEATURES: NITRALLOY STEEL; 6.594 INCHES LO ONG BY 0.873 INCHES OUTSIDE DIAMETER
Related Searches:
B704
SLEEVE AND SLIDE,DIRECTIONAL CONTROL LINEAR VALVE
NSN, MFG P/N
4810003283564
NSN
4810-00-328-3564
B704
SLEEVE AND SLIDE,DIRECTIONAL CONTROL LINEAR VALVE
NSN, MFG P/N
4810003283564
NSN
4810-00-328-3564
MFG
SARGENT AEROSPACE A DOVER DIVERSIFIED CO
Description
III END ITEM IDENTIFICATION: AIRCRAFT HYDRAULIC SYSTEMS
SLEEVE MATERIAL: STEEL CORROSION RESISTING
SPECIAL FEATURES: NITRALLOY STEEL; 6.594 INCHES LO ONG BY 0.873 INCHES OUTSIDE DIAMETER
Related Searches:
6-35871-1
SEAT,VALVE
NSN, MFG P/N
4810003284742
NSN
4810-00-328-4742
MFG
THE BOEING COMPANY DBA BOEING
Description
BODY INSIDE DIAMETER: 0.500 INCHES MINIMUM AND 0.599 INCHES MAXIMUM
BODY OUTSIDE DIAMETER: 0.620 INCHES NOMINAL
DESIGN CONTROL REFERENCE: 6-35871-1
FLANGE DIAMETER: 0.871 INCHES MINIMUM AND 0.873 INCHES MAXIMUM
FLANGE SEAT TO DISK END HEIGHT: 0.800 INCHES NOMINAL
HARDNESS RATING: 27.0 ROCKWELL C MINIMUM AND 27.0 ROCKWELL C MAXIMUM FLANGE
III FSC APPLICATION DATA: ACFT STEERING METERING VALVE
MANUFACTURERS CODE: 81205
MATERIAL: STEEL FLANGE
SEATING SURFACE SHAPE: FLAT
SPECIAL FEATURES: 2 BLEED HOLES
STYLE DESIGNATOR: B9 PLAIN FLANGED
THE MANUFACTURERS DATA:
UNDER FLANGE HEIGHT: 0.480 INCHES NOMINAL
Related Searches:
7133
SEAT,VALVE
NSN, MFG P/N
4810003285361
NSN
4810-00-328-5361
MFG
INTERLINE BRANDS INC. DBA J. A. SEXAUER
Description
BODY INSIDE DIAMETER: 0.375 INCHES NOMINAL
FLANGE DIAMETER: 0.750 INCHES NOMINAL
FLANGE SEAT TO DISK END HEIGHT: 0.125 INCHES NOMINAL
HARDNESS RATING: NOT RATED
MATERIAL: COPPER ALLOY OVERALL
NOMINAL THREAD SIZE: 0.688 INCHES SINGLE THREADED PORTION
SEAT RADIUS: 0.062 INCHES NOMINAL
SEATING SURFACE SHAPE: RADIAL
STYLE DESIGNATOR: A1 FAUCET
THREAD CLASS: 3A SINGLE THREADED PORTION
THREAD LENGTH: 0.219 INCHES NOMINAL SINGLE THREADED PORTION
THREAD QUANTITY PER INCH: 18 SINGLE THREADED PORTION
THREAD SERIES DESIGNATOR: UNS SINGLE THREADED PORTION
UNDER FLANGE HEIGHT: 0.250 INCHES NOMINAL
Related Searches:
71332
SEAT,VALVE
NSN, MFG P/N
4810003285361
NSN
4810-00-328-5361
MFG
INTERLINE BRANDS INC. DBA J. A. SEXAUER
Description
BODY INSIDE DIAMETER: 0.375 INCHES NOMINAL
FLANGE DIAMETER: 0.750 INCHES NOMINAL
FLANGE SEAT TO DISK END HEIGHT: 0.125 INCHES NOMINAL
HARDNESS RATING: NOT RATED
MATERIAL: COPPER ALLOY OVERALL
NOMINAL THREAD SIZE: 0.688 INCHES SINGLE THREADED PORTION
SEAT RADIUS: 0.062 INCHES NOMINAL
SEATING SURFACE SHAPE: RADIAL
STYLE DESIGNATOR: A1 FAUCET
THREAD CLASS: 3A SINGLE THREADED PORTION
THREAD LENGTH: 0.219 INCHES NOMINAL SINGLE THREADED PORTION
THREAD QUANTITY PER INCH: 18 SINGLE THREADED PORTION
THREAD SERIES DESIGNATOR: UNS SINGLE THREADED PORTION
UNDER FLANGE HEIGHT: 0.250 INCHES NOMINAL
Related Searches:
7602576-001
VALVE,SOLENOID
NSN, MFG P/N
4810003285411
NSN
4810-00-328-5411
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
APERTURE DIAMETER: 0.046 INCHES NOMINAL
CONNECTION STYLE: G9 PLAIN ALL ENDS
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
FLOW CONTROL DEVICE: DISK
FLOW CONTROL DEVICE NORMAL OPERATION POSITION: CLOSED
MATERIAL: STEEL BODY
MAXIMUM OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP: 180.0 DEG FAHRENHEIT SINGLE RESPONSE
MOUNTING POSITION: VERTICAL
NOMINAL THREAD SIZE: 0.125 INCHES ALL ENDS
PHASE: SINGLE
SPECIAL FEATURES: BURST PRESSURE 10,000 PSI
STYLE DESIGNATOR: A7 ANGLE
THREAD DIRECTION: RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR: NPT ALL ENDS
VALVE OPERATION METHOD: SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE: 24.0 DC
Related Searches:
B11DK1200-24VDC
VALVE,SOLENOID
NSN, MFG P/N
4810003285411
NSN
4810-00-328-5411
MFG
PARKER-HANNIFIN CORPORATION DBA FLUID CONTROLS DIVISION DIV FLUID CONTROL DIVISION
Description
APERTURE DIAMETER: 0.046 INCHES NOMINAL
CONNECTION STYLE: G9 PLAIN ALL ENDS
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
FLOW CONTROL DEVICE: DISK
FLOW CONTROL DEVICE NORMAL OPERATION POSITION: CLOSED
MATERIAL: STEEL BODY
MAXIMUM OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP: 180.0 DEG FAHRENHEIT SINGLE RESPONSE
MOUNTING POSITION: VERTICAL
NOMINAL THREAD SIZE: 0.125 INCHES ALL ENDS
PHASE: SINGLE
SPECIAL FEATURES: BURST PRESSURE 10,000 PSI
STYLE DESIGNATOR: A7 ANGLE
THREAD DIRECTION: RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR: NPT ALL ENDS
VALVE OPERATION METHOD: SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE: 24.0 DC
Related Searches:
B1DA1-200-24VDC
VALVE,SOLENOID
NSN, MFG P/N
4810003285411
NSN
4810-00-328-5411
MFG
PARKER-HANNIFIN CORPORATION DBA FLUID CONTROLS DIVISION DIV FLUID CONTROL DIVISION
Description
APERTURE DIAMETER: 0.046 INCHES NOMINAL
CONNECTION STYLE: G9 PLAIN ALL ENDS
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
FLOW CONTROL DEVICE: DISK
FLOW CONTROL DEVICE NORMAL OPERATION POSITION: CLOSED
MATERIAL: STEEL BODY
MAXIMUM OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP: 180.0 DEG FAHRENHEIT SINGLE RESPONSE
MOUNTING POSITION: VERTICAL
NOMINAL THREAD SIZE: 0.125 INCHES ALL ENDS
PHASE: SINGLE
SPECIAL FEATURES: BURST PRESSURE 10,000 PSI
STYLE DESIGNATOR: A7 ANGLE
THREAD DIRECTION: RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR: NPT ALL ENDS
VALVE OPERATION METHOD: SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE: 24.0 DC
Related Searches:
7602576-003
VALVE,LINEAR,DIRECTIONAL CONTROL
NSN, MFG P/N
4810003285413
NSN
4810-00-328-5413
7602576-003
VALVE,LINEAR,DIRECTIONAL CONTROL
NSN, MFG P/N
4810003285413
NSN
4810-00-328-5413
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
SPECIAL FEATURES: CRES;THREE-WAY;NORMALLY CLOSED;175 PSI DIFFERENTIAL PRESSURE;3 PORTS THD INTERNAL 0.125 IN.NPT;24V DC;7 WATTS;MEDIA WOG;180 DEG TEMP MAX
Related Searches:
B16DK1175-24VDC
VALVE,LINEAR,DIRECTIONAL CONTROL
NSN, MFG P/N
4810003285413
NSN
4810-00-328-5413
B16DK1175-24VDC
VALVE,LINEAR,DIRECTIONAL CONTROL
NSN, MFG P/N
4810003285413
NSN
4810-00-328-5413
MFG
PARKER-HANNIFIN CORPORATION DBA FLUID CONTROLS DIVISION DIV FLUID CONTROL DIVISION
Description
SPECIAL FEATURES: CRES;THREE-WAY;NORMALLY CLOSED;175 PSI DIFFERENTIAL PRESSURE;3 PORTS THD INTERNAL 0.125 IN.NPT;24V DC;7 WATTS;MEDIA WOG;180 DEG TEMP MAX
Related Searches:
7602576-002
VALVE,SOLENOID
NSN, MFG P/N
4810003285418
NSN
4810-00-328-5418
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
APERTURE DIAMETER: 0.047 INCHES NOMINAL
CONNECTION STYLE: G9 PLAIN ALL ENDS
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
FLOW CONTROL DEVICE: DISK
FLOW CONTROL DEVICE NORMAL OPERATION POSITION: CLOSED
FREQUENCY IN HERTZ: 60.0
MATERIAL: COPPER ALLOY BODY
MAXIMUM OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP: 180.0 DEG FAHRENHEIT SINGLE RESPONSE
MOUNTING POSITION: VERTICAL
NOMINAL THREAD SIZE: 0.125 INCHES ALL ENDS
PHASE: SINGLE
SPECIAL FEATURES: BURST PRESSURE 10,000 PSI
STYLE DESIGNATOR: A1 STRAIGHT THRU
THREAD DIRECTION: RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR: NPT ALL ENDS
VALVE OPERATION METHOD: SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE: 120.0 AC
Related Searches:
B11DK 1200-120-60
VALVE,SOLENOID
NSN, MFG P/N
4810003285418
NSN
4810-00-328-5418
MFG
PARKER-HANNIFIN CORPORATION DBA FLUID CONTROLS DIVISION DIV FLUID CONTROL DIVISION
Description
APERTURE DIAMETER: 0.047 INCHES NOMINAL
CONNECTION STYLE: G9 PLAIN ALL ENDS
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
FLOW CONTROL DEVICE: DISK
FLOW CONTROL DEVICE NORMAL OPERATION POSITION: CLOSED
FREQUENCY IN HERTZ: 60.0
MATERIAL: COPPER ALLOY BODY
MAXIMUM OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP: 180.0 DEG FAHRENHEIT SINGLE RESPONSE
MOUNTING POSITION: VERTICAL
NOMINAL THREAD SIZE: 0.125 INCHES ALL ENDS
PHASE: SINGLE
SPECIAL FEATURES: BURST PRESSURE 10,000 PSI
STYLE DESIGNATOR: A1 STRAIGHT THRU
THREAD DIRECTION: RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR: NPT ALL ENDS
VALVE OPERATION METHOD: SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE: 120.0 AC
Related Searches:
B1DA1-200-120-60
VALVE,SOLENOID
NSN, MFG P/N
4810003285418
NSN
4810-00-328-5418
MFG
PARKER-HANNIFIN CORPORATION DBA FLUID CONTROLS DIVISION DIV FLUID CONTROL DIVISION
Description
APERTURE DIAMETER: 0.047 INCHES NOMINAL
CONNECTION STYLE: G9 PLAIN ALL ENDS
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
FLOW CONTROL DEVICE: DISK
FLOW CONTROL DEVICE NORMAL OPERATION POSITION: CLOSED
FREQUENCY IN HERTZ: 60.0
MATERIAL: COPPER ALLOY BODY
MAXIMUM OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP: 180.0 DEG FAHRENHEIT SINGLE RESPONSE
MOUNTING POSITION: VERTICAL
NOMINAL THREAD SIZE: 0.125 INCHES ALL ENDS
PHASE: SINGLE
SPECIAL FEATURES: BURST PRESSURE 10,000 PSI
STYLE DESIGNATOR: A1 STRAIGHT THRU
THREAD DIRECTION: RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR: NPT ALL ENDS
VALVE OPERATION METHOD: SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE: 120.0 AC
Related Searches:
820-2177503-54
RING SET,PISTON
NSN, MFG P/N
4810003287798
NSN
4810-00-328-7798
MFG
NAVAL SEA SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 820-4446269-1
MANUFACTURERS CODE: 80064
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
820-4446261-39
RING SET,PISTON
NSN, MFG P/N
4810003287798
NSN
4810-00-328-7798
MFG
NAVAL SEA SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 820-4446269-1
MANUFACTURERS CODE: 80064
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
820-4446269-1
RING SET,PISTON
NSN, MFG P/N
4810003287798
NSN
4810-00-328-7798
MFG
NAVAL SHIP SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 820-4446269-1
MANUFACTURERS CODE: 80064
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
7723477-1
DISK,VALVE
NSN, MFG P/N
4810003292207
NSN
4810-00-329-2207
MFG
PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS
Description
END ITEM IDENTIFICATION: VALVE PART NO. 7720015-102
Related Searches:
7722172-101
SEAT ASSEMBLY,ISOLA
NSN, MFG P/N
4810003292208
NSN
4810-00-329-2208
MFG
PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS
Description
DESIGN CONTROL REFERENCE: 7722172-101
III END ITEM IDENTIFICATION: VALVE PART NO. 7720012-102
MANUFACTURERS CODE: 92003
THE MANUFACTURERS DATA: