My Quote Request
5305-00-015-0919
20 Products
150919
SCREW,WOOD
NSN, MFG P/N
5305000150919
NSN
5305-00-015-0919
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-246
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 3RD MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 260
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS971TYPEE
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
~1: 1/4 H FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 6TH MATERIAL RESPONSE OVERALL
Related Searches:
ANSI-B18.6.1
SCREW,WOOD
NSN, MFG P/N
5305000149926
NSN
5305-00-014-9926
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
Related Searches:
FF-S-111
SCREW,WOOD
NSN, MFG P/N
5305000149926
NSN
5305-00-014-9926
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
Related Searches:
FF-S-111 TY1ST1C
SCREW,WOOD
NSN, MFG P/N
5305000149926
NSN
5305-00-014-9926
MFG
GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE
Description
FASTENER LENGTH: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
Related Searches:
MS35493-76
SCREW,WOOD
NSN, MFG P/N
5305000149926
NSN
5305-00-014-9926
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SURFACE TREATMENT: ZINC OVERALL
Related Searches:
150608
SCREW,WOOD
NSN, MFG P/N
5305000150608
NSN
5305-00-015-0608
MFG
GENERAL MOTORS CORP
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-102
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.457 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
150608
SCREW,WOOD
NSN, MFG P/N
5305000150608
NSN
5305-00-015-0608
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-102
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.457 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
AN545-14R7
SCREW,WOOD
NSN, MFG P/N
5305000150608
NSN
5305-00-015-0608
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-102
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.457 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
MS35493-102
SCREW,WOOD
NSN, MFG P/N
5305000150608
NSN
5305-00-015-0608
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-102
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.457 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
MS35493-207
SCREW,WOOD
NSN, MFG P/N
5305000150771
NSN
5305-00-015-0771
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-207
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
Related Searches:
150780
SCREW,WOOD
NSN, MFG P/N
5305000150780
NSN
5305-00-015-0780
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-210
FASTENER LENGTH: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
Related Searches:
MS35493-210
SCREW,WOOD
NSN, MFG P/N
5305000150780
NSN
5305-00-015-0780
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-210
FASTENER LENGTH: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
Related Searches:
150859
SCREW,WOOD
NSN, MFG P/N
5305000150859
NSN
5305-00-015-0859
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-228
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 3RD MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 260
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS971TYPEE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
~1: 1/4 H FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Related Searches:
MILS971TYPEE
SCREW,WOOD
NSN, MFG P/N
5305000150859
NSN
5305-00-015-0859
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-228
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 3RD MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 260
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS971TYPEE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
~1: 1/4 H FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Related Searches:
MS35493-228
SCREW,WOOD
NSN, MFG P/N
5305000150859
NSN
5305-00-015-0859
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-228
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 3RD MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 260
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS971TYPEE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
~1: 1/4 H FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Related Searches:
ANSI B18.6.1
SCREW,WOOD
NSN, MFG P/N
5305000150868
NSN
5305-00-015-0868
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: COPPER ALLOY OVERALL
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
Related Searches:
FF-S-111
SCREW,WOOD
NSN, MFG P/N
5305000150868
NSN
5305-00-015-0868
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: COPPER ALLOY OVERALL
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
Related Searches:
FF-S-111 TY1ST1C
SCREW,WOOD
NSN, MFG P/N
5305000150868
NSN
5305-00-015-0868
MFG
GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: COPPER ALLOY OVERALL
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
Related Searches:
MS35493-230
SCREW,WOOD
NSN, MFG P/N
5305000150868
NSN
5305-00-015-0868
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: COPPER ALLOY OVERALL
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1C STYLE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
Related Searches:
MILS971TYPEE
SCREW,WOOD
NSN, MFG P/N
5305000150919
NSN
5305-00-015-0919
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35493-246
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 3RD MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 260
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MILS971TYPEE
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
~1: 1/4 H FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 6TH MATERIAL RESPONSE OVERALL