My Quote Request
5305-00-018-7069
20 Products
108608
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
108608
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
MTU DETROIT DIESEL INC. DIV MTU DETROIT DIESEL INC.
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
108608
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
TEREX CORP
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
108608
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
EUCLID INC
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
187069
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
5153139
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
5153139
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000187069
NSN
5305-00-018-7069
MFG
MTU DETROIT DIESEL INC. DIV MTU DETROIT DIESEL INC.
Description
FASTENER LENGTH: 2.031 INCHES MINIMUM AND 2.125 INCHES MAXIMUM
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
187180
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305000187180
NSN
5305-00-018-7180
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 187180
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 21450
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
PRIMARY WASHER STYLE: G1 FLAT EXTERNAL TEETH
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WASHER QUANTITY: 1
Related Searches:
79911
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305000187180
NSN
5305-00-018-7180
MFG
STEWART WARNER SOUTH WIND CORPORATION
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 187180
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 21450
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
PRIMARY WASHER STYLE: G1 FLAT EXTERNAL TEETH
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WASHER QUANTITY: 1
Related Searches:
A8044-12
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305000187180
NSN
5305-00-018-7180
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 187180
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 21450
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
PRIMARY WASHER STYLE: G1 FLAT EXTERNAL TEETH
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WASHER QUANTITY: 1
Related Searches:
187347
SCREW,MACHINE
NSN, MFG P/N
5305000187347
NSN
5305-00-018-7347
MFG
GENERAL MOTORS CORP
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.722 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 2S STYLE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.262 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92TYPE1STYLE2S
SCREW,MACHINE
NSN, MFG P/N
5305000187347
NSN
5305-00-018-7347
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD DIAMETER: 0.722 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 2S STYLE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.262 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
47150
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305000187418
NSN
5305-00-018-7418
MFG
TIFFIN PARTS L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP.
Description
DESIGN CONTROL REFERENCE: 47150
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 13841
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.047 INCHES NOMINAL
PRIMARY WASHER OUTSIDE DIAMETER: 0.292 INCHES MAXIMUM
PRIMARY WASHER STYLE: G30 FLAT
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.906 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WASHER QUANTITY: 1
Related Searches:
5R368
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305000187418
NSN
5305-00-018-7418
MFG
COLT INDUSTRIES INC HOLLEY AUTOMOTIVE DIV
Description
DESIGN CONTROL REFERENCE: 47150
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 13841
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.047 INCHES NOMINAL
PRIMARY WASHER OUTSIDE DIAMETER: 0.292 INCHES MAXIMUM
PRIMARY WASHER STYLE: G30 FLAT
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.906 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WASHER QUANTITY: 1
Related Searches:
AN525-8R10
SCREW,MACHINE
NSN, MFG P/N
5305000187475
NSN
5305-00-018-7475
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN525-8R10
EXTENDED WASHER DIAMETER: 0.375 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.018 INCHES MINIMUM AND 0.028 INCHES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.312 INCHES NOMINAL
HEAD HEIGHT: 0.082 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
HEAD STYLE: A29 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-689 /CANCELLED/ FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.360 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN525-8R10
SCREW,MACHINE
NSN, MFG P/N
5305000187475
NSN
5305-00-018-7475
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN525-8R10
EXTENDED WASHER DIAMETER: 0.375 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.018 INCHES MINIMUM AND 0.028 INCHES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.312 INCHES NOMINAL
HEAD HEIGHT: 0.082 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
HEAD STYLE: A29 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-689 /CANCELLED/ FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.360 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
858825-00
SCREW,MACHINE
NSN, MFG P/N
5305000187513
NSN
5305-00-018-7513
MFG
DEFENSE REDUCTION AGENCY MS 6201
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.635 INCHES NOMINAL
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4037 OR STEEL COMP 4140
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 5TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 6TH MATERIAL
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
~1: RESPONSE
Related Searches:
NAS1219-5-16P
SCREW,MACHINE
NSN, MFG P/N
5305000187513
NSN
5305-00-018-7513
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.635 INCHES NOMINAL
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4037 OR STEEL COMP 4140
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 5TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 6TH MATERIAL
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
~1: RESPONSE
Related Searches:
NAS1220-5C10
SCREW,MACHINE
NSN, MFG P/N
5305000187514
NSN
5305-00-018-7514
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM
HEAD DIAMETER: 0.583 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 15000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1220 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.376 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1220-5E10
SCREW,MACHINE
NSN, MFG P/N
5305000187514
NSN
5305-00-018-7514
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM
HEAD DIAMETER: 0.583 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 15000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1220 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.376 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF