My Quote Request
5305-00-042-6946
20 Products
3CA415
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000426946
NSN
5305-00-042-6946
MFG
CARTER RALPH B CO
Description
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY DRILLED HOLE
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD HEIGHT: 0.234 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.085 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 OR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85TYPE2STYLE10P
NONDEFINITIVE SPEC/STD DATA: II TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.562 INCHES NOMINAL
Related Searches:
FFS92TYPE1STYLE8S
SCREW,MACHINE
NSN, MFG P/N
5305000426880
NSN
5305-00-042-6880
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.062 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: NICKEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
S6277
SCREW,MACHINE
NSN, MFG P/N
5305000426880
NSN
5305-00-042-6880
MFG
VOLVO TRUCKS NORTH AMERICA INC. DBA FOREIGN PARENT IS VOLVO LASTVAGNAR AB GOTEBORG SWEDEN.
Description
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.062 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: NICKEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
28308
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000426883
NSN
5305-00-042-6883
MFG
DRESSER INC. DIV DRESSER WAUKESHA
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-425
FASTENER LENGTH: 4.500 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85TYPE2STYLE10P
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
FFS85TYPE2STYLE10P
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000426883
NSN
5305-00-042-6883
FFS85TYPE2STYLE10P
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000426883
NSN
5305-00-042-6883
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-425
FASTENER LENGTH: 4.500 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85TYPE2STYLE10P
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
MS35307-425
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000426883
NSN
5305-00-042-6883
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-425
FASTENER LENGTH: 4.500 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85TYPE2STYLE10P
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
426887
SCREW,MACHINE
NSN, MFG P/N
5305000426887
NSN
5305-00-042-6887
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 426887
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.102 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 21450
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B TY I ST 4S
SCREW MATERIAL: STEEL CORROSION RESISTING
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-92B TY I ST 4S
SCREW,MACHINE
NSN, MFG P/N
5305000426887
NSN
5305-00-042-6887
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 426887
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.102 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 21450
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B TY I ST 4S
SCREW MATERIAL: STEEL CORROSION RESISTING
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
426889
SCREW,MACHINE
NSN, MFG P/N
5305000426889
NSN
5305-00-042-6889
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE1S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 1S STYLE
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611 FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: TIN
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE1S
SCREW,MACHINE
NSN, MFG P/N
5305000426889
NSN
5305-00-042-6889
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE1S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 1S STYLE
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611 FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: TIN
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305000426890
NSN
5305-00-042-6890
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35249-88
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.462 INCHES MINIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 2S STYLE AND 1 TYPE
SCREW MATERIAL: STEEL COMP 410
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.588 INCHES MINIMUM AND 0.597 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS35249-88
SCREW,MACHINE
NSN, MFG P/N
5305000426890
NSN
5305-00-042-6890
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35249-88
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.462 INCHES MINIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 2S STYLE AND 1 TYPE
SCREW MATERIAL: STEEL COMP 410
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.588 INCHES MINIMUM AND 0.597 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
25704-281200-45-0
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
25704-281200-45-0
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
MFG
BUNDESAMT FUER WEHRTECHNIK UND BESCH AFFUNG - FUER DOKUMENTE OHNE NUTZUNGSRECHT DES BWB FUER BESCHAFFU
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35457-51
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
Related Searches:
25704-281200-45-0
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
25704-281200-45-0
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
MFG
KRAUSS-MAFFEI WEGMANN GMBH & CO KG -WERK KASSEL-
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35457-51
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
Related Searches:
426892
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35457-51
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
Related Searches:
MS35457-51
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35457-51
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
Related Searches:
MS35457-51
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
MFG
LIEBHERR AEROSPACE LINDENBERG GMBH
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35457-51
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
Related Searches:
MS35457-51
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000426892
NSN
5305-00-042-6892
MFG
FEINMECHANISCHE WERKE MAINZ GMBH
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35457-51
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM YIELD STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
Related Searches:
FF-S-92B TY1 ST4S
SCREW,MACHINE
NSN, MFG P/N
5305000426930
NSN
5305-00-042-6930
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT: 0.273 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B TY1 ST4S
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 4S STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE4S
SCREW,MACHINE
NSN, MFG P/N
5305000426930
NSN
5305-00-042-6930
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT: 0.273 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B TY1 ST4S
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 4S STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC