My Quote Request
5305-00-043-6733
20 Products
25704-281280-22 0
SCREW,MACHINE
NSN, MFG P/N
5305000436733
NSN
5305-00-043-6733
MFG
BUNDESAMT FUER WEHRTECHNIK UND BESCH AFFUNG - FUER DOKUMENTE OHNE NUTZUNGSRECHT DES BWB FUER BESCHAFFU
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-64
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GR 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
436714
SCREW,MACHINE
NSN, MFG P/N
5305000436714
NSN
5305-00-043-6714
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT SPECIFICATION AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6436714
SCREW,MACHINE
NSN, MFG P/N
5305000436714
NSN
5305-00-043-6714
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT SPECIFICATION AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305000436714
NSN
5305-00-043-6714
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT SPECIFICATION AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35226-45
SCREW,MACHINE
NSN, MFG P/N
5305000436714
NSN
5305-00-043-6714
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT SPECIFICATION AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
436715
SCREW,MACHINE
NSN, MFG P/N
5305000436715
NSN
5305-00-043-6715
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT STANDARD AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
436715
SCREW,MACHINE
NSN, MFG P/N
5305000436715
NSN
5305-00-043-6715
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT STANDARD AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6436715
SCREW,MACHINE
NSN, MFG P/N
5305000436715
NSN
5305-00-043-6715
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT STANDARD AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305000436715
NSN
5305-00-043-6715
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT STANDARD AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35226-46
SCREW,MACHINE
NSN, MFG P/N
5305000436715
NSN
5305-00-043-6715
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE AND 8-36 SIZE
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81348-FF-S-92 GOVERNMENT STANDARD AND 96906-MS35226/CANCELED/ GOVERNMENT STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.584 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35225-58
SCREW,MACHINE
NSN, MFG P/N
5305000436727
NSN
5305-00-043-6727
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-58
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
9A6-070
SCREW,MACHINE
NSN, MFG P/N
5305000436729
NSN
5305-00-043-6729
MFG
COPELAND CORP
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-60
FASTENER LENGTH: 0.313 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE9S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 9S STYLE
SCREW MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1213 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110
Related Searches:
FFS92TYPE1STYLE9S
SCREW,MACHINE
NSN, MFG P/N
5305000436729
NSN
5305-00-043-6729
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-60
FASTENER LENGTH: 0.313 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE9S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 9S STYLE
SCREW MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1213 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110
Related Searches:
MS35225-60
SCREW,MACHINE
NSN, MFG P/N
5305000436729
NSN
5305-00-043-6729
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-60
FASTENER LENGTH: 0.313 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE9S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 9S STYLE
SCREW MATERIAL: STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1213 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1541 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110
Related Searches:
12028-27
SCREW,MACHINE
NSN, MFG P/N
5305000436732
NSN
5305-00-043-6732
MFG
MET-PRO CORPORATION
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-63
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 9S STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
12Z1131-61
SCREW,MACHINE
NSN, MFG P/N
5305000436732
NSN
5305-00-043-6732
MFG
NAVAL ORDNANCE STANDARDS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-63
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 9S STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS35225-63
SCREW,MACHINE
NSN, MFG P/N
5305000436732
NSN
5305-00-043-6732
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-63
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 9S STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP. FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GRADE 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR CHROMATE ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
25704-281280-22-0
SCREW,MACHINE
NSN, MFG P/N
5305000436733
NSN
5305-00-043-6733
MFG
KRAUSS-MAFFEI WEGMANN GMBH & CO KG -WERK KASSEL-
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-64
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GR 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS35225-64
SCREW,MACHINE
NSN, MFG P/N
5305000436733
NSN
5305-00-043-6733
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-64
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GR 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS35225-64
SCREW,MACHINE
NSN, MFG P/N
5305000436733
NSN
5305-00-043-6733
MFG
FEINMECHANISCHE WERKE MAINZ GMBH
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35225-64
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,CANC FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-409 GR 2,3 OR 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC