My Quote Request
5305-00-047-2346
20 Products
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
QUALIFIED AIR COMPONENTS INC.
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACB30LU2-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469975
NSN
5305-00-046-9975
MFG
HUCK INTL INC
Description
FASTENER LENGTH: 0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
VALLEY-TODECO INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
FEDERAL MANUFACTURING CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
SONIC INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
THE BOEING COMPANY DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
BACB30LU2-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000469990
NSN
5305-00-046-9990
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049RJGCAMS 6322 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE FINISH: 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
APCOM INC
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
PLASTIC AND METAL PRODUCTS CORP ORATION
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
HI-SHEAR CORPORATION
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1124-4
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000472346
NSN
5305-00-047-2346
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
FASTENER LENGTH: 0.551 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF