My Quote Request
5305-00-051-7326
20 Products
NAS1352-3H10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517326
NSN
5305-00-051-7326
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.512 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
Related Searches:
NAS1352-4H24
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517328
NSN
5305-00-051-7328
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.044 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
NAS1352-8H24
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517328
NSN
5305-00-051-7328
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.044 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
NAS1352-4H16
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517329
NSN
5305-00-051-7329
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.044 INCHES NOMINAL
HOLE QUANTITY: 2
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.870 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
MS24693-S33
SCREW,MACHINE
NSN, MFG P/N
5305000517341
NSN
5305-00-051-7341
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS24693-S33
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 1010 OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-631 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-634 FED SPEC 1ST MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS24693S33
SCREW,MACHINE
NSN, MFG P/N
5305000517341
NSN
5305-00-051-7341
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS24693-S33
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 1010 OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-631 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-634 FED SPEC 1ST MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
2004T64P03
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517352
NSN
5305-00-051-7352
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.033 INCHES NOMINAL
HOLE QUANTITY: 2
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.341 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
6-40NF3X3-8LG
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517352
NSN
5305-00-051-7352
MFG
STAR STAINLESS SCREW CO
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.033 INCHES NOMINAL
HOLE QUANTITY: 2
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.341 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
NAS1351C06H6
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517352
NSN
5305-00-051-7352
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.033 INCHES NOMINAL
HOLE QUANTITY: 2
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.341 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
NAS560XK4-9
SCREW,MACHINE
NSN, MFG P/N
5305000517371
NSN
5305-00-051-7371
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.073 INCHES MINIMUM AND 1.118 INCHES MAXIMUM
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: NICKEL ALLOY X-750
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5668 ASSN STD SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS560 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.496 INCHES MINIMUM AND 0.571 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS221C19
SCREW,MACHINE
NSN, MFG P/N
5305000517372
NSN
5305-00-051-7372
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.204 INCHES MINIMUM AND 1.251 INCHES MAXIMUM
HEAD DIAMETER: 0.361 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD HEIGHT: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 62000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: ALUMINUM ALLOY 2024
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-298 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-354 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: ANODIZE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.377 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
124C1331PC4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517613
NSN
5305-00-051-7613
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC4
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
238E203-31
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517613
NSN
5305-00-051-7613
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC4
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
124C1331PC5
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517614
NSN
5305-00-051-7614
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC5
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
238E203-33
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000517614
NSN
5305-00-051-7614
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC5
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
124C1331PC9
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000517632
NSN
5305-00-051-7632
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC9
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
247E228-27
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000517632
NSN
5305-00-051-7632
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC9
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
247E228-27
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000517632
NSN
5305-00-051-7632
MFG
GENERAL ELECTRIC CO
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC9
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
124C1331PC17
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000517636
NSN
5305-00-051-7636
MFG
KAPL INC DBA KNOLLS ATOMIC POWER LABORATORY
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 124C1331PC17
MANUFACTURERS CODE: 04241
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
THE MANUFACTURERS DATA:
Related Searches:
AN507-1032R20
SCREW,MACHINE
NSN, MFG P/N
5305000518307
NSN
5305-00-051-8307
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS24693-S278
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF