My Quote Request
5305-00-083-3379
20 Products
122967CH06-2LE
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000833379
NSN
5305-00-083-3379
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.377 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
LOCKING FEATURE: PELLET THREADS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SPECIFICATION/STANDARD DATA: 26512-GB510G MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.242 INCHES MINIMUM AND 0.292 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
GB510AE3-8T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833367
NSN
5305-00-083-3367
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
HEAD DIAMETER: 0.3499 INCHES MINIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MANUFACTURERS CODE: 26512
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MFR SOURCE CONTROLLING REFERENCE: GB510AE3-8T
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB510AE3-8T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833367
NSN
5305-00-083-3367
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
HEAD DIAMETER: 0.3499 INCHES MINIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MANUFACTURERS CODE: 26512
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MFR SOURCE CONTROLLING REFERENCE: GB510AE3-8T
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8138-3-8T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833367
NSN
5305-00-083-3367
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
HEAD DIAMETER: 0.3499 INCHES MINIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MANUFACTURERS CODE: 26512
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MFR SOURCE CONTROLLING REFERENCE: GB510AE3-8T
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8138-3-8T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833367
NSN
5305-00-083-3367
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.823 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
HEAD DIAMETER: 0.3499 INCHES MINIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MANUFACTURERS CODE: 26512
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MFR SOURCE CONTROLLING REFERENCE: GB510AE3-8T
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
106712-3-15T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833368
NSN
5305-00-083-3368
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.088 INCHES MINIMUM AND 1.155 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.261 INCHES MINIMUM AND 1.308 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB510AE3-15T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833368
NSN
5305-00-083-3368
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.088 INCHES MINIMUM AND 1.155 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.261 INCHES MINIMUM AND 1.308 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8138-3-15T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833368
NSN
5305-00-083-3368
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.088 INCHES MINIMUM AND 1.155 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.261 INCHES MINIMUM AND 1.308 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8138-3-15T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833368
NSN
5305-00-083-3368
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.088 INCHES MINIMUM AND 1.155 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.261 INCHES MINIMUM AND 1.308 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
106712-3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB510AE3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB510AE3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB510AE3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB510AE3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
DEUTSCH FASTENER CORP
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8138-3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8138-3-16T
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000833376
NSN
5305-00-083-3376
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.150 INCHES MINIMUM AND 1.217 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.323 INCHES MINIMUM AND 1.370 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
66584K06-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000833379
NSN
5305-00-083-3379
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.377 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
LOCKING FEATURE: PELLET THREADS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SPECIFICATION/STANDARD DATA: 26512-GB510G MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.242 INCHES MINIMUM AND 0.292 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
66584K06-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000833379
NSN
5305-00-083-3379
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.377 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
LOCKING FEATURE: PELLET THREADS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SPECIFICATION/STANDARD DATA: 26512-GB510G MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.242 INCHES MINIMUM AND 0.292 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
BM20000-06-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000833379
NSN
5305-00-083-3379
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.377 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
LOCKING FEATURE: PELLET THREADS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SPECIFICATION/STANDARD DATA: 26512-GB510G MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.242 INCHES MINIMUM AND 0.292 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
BM20000-06-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000833379
NSN
5305-00-083-3379
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.377 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
LOCKING FEATURE: PELLET THREADS
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SPECIFICATION/STANDARD DATA: 26512-GB510G MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.242 INCHES MINIMUM AND 0.292 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC