My Quote Request
5305-00-115-6859
20 Products
77594244
SCREW,MACHINE
NSN, MFG P/N
5305001156859
NSN
5305-00-115-6859
MFG
GOODRICH CONTROL SYSTEMS LIMITED
Description
DESIGN CONTROL REFERENCE: 77594244
FASTENER LENGTH: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
HEAD HEIGHT: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: K0131
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 580 FSCM 21883 MFR REF SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MINIMUM AND 0.342 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
Related Searches:
6566K83P002
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156860
NSN
5305-00-115-6860
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 6566K83P002
FASTENER LENGTH: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
MANUFACTURERS CODE: 97424
NOMINAL THREAD DIAMETER: 0.086 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6566K83
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156862
NSN
5305-00-115-6862
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
MANUFACTURERS CODE: 97424
MFR SOURCE CONTROLLING REFERENCE: 6566K83
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6566K83P005
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156862
NSN
5305-00-115-6862
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
MANUFACTURERS CODE: 97424
MFR SOURCE CONTROLLING REFERENCE: 6566K83
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6566K83P014
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156862
NSN
5305-00-115-6862
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
MANUFACTURERS CODE: 97424
MFR SOURCE CONTROLLING REFERENCE: 6566K83
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6566K83P007
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156863
NSN
5305-00-115-6863
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 6566K83P007
FASTENER LENGTH: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
HEAD DIAMETER: 0.182 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
MANUFACTURERS CODE: 97424
NOMINAL THREAD DIAMETER: 0.112 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6566K83P018
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156864
NSN
5305-00-115-6864
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 6566K83P018
FASTENER LENGTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
HEAD DIAMETER: 0.182 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 97424
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.141 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.062 INCHES NOMINAL
Related Searches:
6566K83P10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001156864
NSN
5305-00-115-6864
MFG
LEHIGH-ARMSTRONG INC.
Description
COUNTERSINK ANGLE: 60.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 6566K83P018
FASTENER LENGTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
HEAD DIAMETER: 0.182 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 97424
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.141 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.062 INCHES NOMINAL
Related Searches:
6517K71P002
SCREW,MACHINE
NSN, MFG P/N
5305001156871
NSN
5305-00-115-6871
MFG
AMETEK INC. D IV AEROSPACE & DEFENSE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 6517K71P002
FASTENER LENGTH: 0.197 INCHES MINIMUM AND 0.207 INCHES MAXIMUM
HEAD DIAMETER: 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 97424
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL OR STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: NAS 1597 FSCM 80205 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6517K71P002
SCREW,MACHINE
NSN, MFG P/N
5305001156871
NSN
5305-00-115-6871
MFG
LEHIGH-ARMSTRONG INC.
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 6517K71P002
FASTENER LENGTH: 0.197 INCHES MINIMUM AND 0.207 INCHES MAXIMUM
HEAD DIAMETER: 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 97424
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL OR STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: NAS 1597 FSCM 80205 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
537602
SCREW,TEMP COMPENSA
NSN, MFG P/N
5305001156899
NSN
5305-00-115-6899
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-TUCSON
Description
DESIGN CONTROL REFERENCE: 537602
GENERAL CHARACTERISTICS ITEM DESCRIPTION: THD0.086-56 UNC-2A,BRASS,2.930 IN. MIN 2.960 IN. MAX LG
MANUFACTURERS CODE: 64547
THE MANUFACTURERS DATA:
Related Searches:
537602
SCREW,TEMP COMPENSA
NSN, MFG P/N
5305001156899
NSN
5305-00-115-6899
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
DESIGN CONTROL REFERENCE: 537602
GENERAL CHARACTERISTICS ITEM DESCRIPTION: THD0.086-56 UNC-2A,BRASS,2.930 IN. MIN 2.960 IN. MAX LG
MANUFACTURERS CODE: 64547
THE MANUFACTURERS DATA:
Related Searches:
7590761C
SCREW,MACHINE
NSN, MFG P/N
5305001156904
NSN
5305-00-115-6904
MFG
GOODRICH CONTROL SYSTEMS LIMITED
Description
DESIGN CONTROL REFERENCE: 77594740
FASTENER LENGTH: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
HEAD HEIGHT: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
MANUFACTURERS CODE: K0131
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: S.2 OR S.94 FSCM 21883 MFR REF SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PF12 FSCM 21883 MFR REF SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.281 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
Related Searches:
77594740
SCREW,MACHINE
NSN, MFG P/N
5305001156904
NSN
5305-00-115-6904
MFG
GOODRICH CONTROL SYSTEMS LIMITED
Description
DESIGN CONTROL REFERENCE: 77594740
FASTENER LENGTH: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
HEAD HEIGHT: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
MANUFACTURERS CODE: K0131
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: S.2 OR S.94 FSCM 21883 MFR REF SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PF12 FSCM 21883 MFR REF SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.281 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
Related Searches:
71320601-00
SCREW,SPECIAL
NSN, MFG P/N
5305001156911
NSN
5305-00-115-6911
MFG
CULVER CITY HALL
Description
SCREW,SPECIAL
Related Searches:
S165-25
SCREW,SPECIAL
NSN, MFG P/N
5305001156915
NSN
5305-00-115-6915
MFG
PSI-PERIPHERAL SUPPORT
Description
SCREW,SPECIAL
Related Searches:
S165-25
SCREW,SPECIAL
NSN, MFG P/N
5305001156915
NSN
5305-00-115-6915
MFG
MILTOPE CORPORATION DBA VT MILTOPE
Description
SCREW,SPECIAL
Related Searches:
M33AS1032-10C
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001158754
NSN
5305-00-115-8754
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.093 INCHES NOMINAL FIRST HOLE
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS514P440-9
SCREW,MACHINE
NSN, MFG P/N
5305001159358
NSN
5305-00-115-9358
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.183 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.436 INCHES MINIMUM AND 0.517 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS514P440-9P
SCREW,MACHINE
NSN, MFG P/N
5305001159358
NSN
5305-00-115-9358
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.183 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.436 INCHES MINIMUM AND 0.517 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC