My Quote Request
5305-00-135-5157
20 Products
09417926
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305001355157
NSN
5305-00-135-5157
MFG
MTU DETROIT DIESEL INC. DIV MTU DETROIT DIESEL INC.
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER: 0.250 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.063 INCHES MINIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.384 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
PRIMARY WASHER STYLE: G9 SPLIT HELICAL RING
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.650 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 1
Related Searches:
16991-3C-10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
58081-04
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
58081-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
TRIUMPH CONTROLS LLC DBA TRIUMPH CONTROLS- NORTH WALES
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
FFS86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
MS24671-21
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
MS24671-21
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
POD-58081 ITEM 58081-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
POD-58081 ITEM 58081-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001355056
NSN
5305-00-135-5056
MFG
TRIUMPH CONTROLS LLC DBA TRIUMPH CONTROLS- NORTH WALES
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.399 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
12262
SETSCREW
NSN, MFG P/N
5305001355057
NSN
5305-00-135-5057
MFG
AEROSONIC CORPORATION
Description
DESIGN CONTROL REFERENCE: 12262
FASTENER LENGTH: 0.434 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
HEAD DIAMETER: 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 98810
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT DIAMETER: 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
POINT LENGTH: 0.042 INCHES MINIMUM AND 0.048 INCHES MAXIMUM
POINT STYLE: F11 BALL
SPECIAL FEATURES: THD RELIEF 0.031 IN. WIDE 0.072 IN. DIA
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.358 INCHES MINIMUM AND 0.364 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS200
SETSCREW
NSN, MFG P/N
5305001355063
NSN
5305-00-135-5063
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18065-71
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 STYLE
POINT STYLE: F19 FLAT
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
LL18065-71
SETSCREW
NSN, MFG P/N
5305001355063
NSN
5305-00-135-5063
MFG
LONG-LOK FASTENERS CORPORATION
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18065-71
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 STYLE
POINT STYLE: F19 FLAT
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
MS18065-71
SETSCREW
NSN, MFG P/N
5305001355063
NSN
5305-00-135-5063
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18065-71
FASTENER LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET OR STRIP THREADS
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS200
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 STYLE
POINT STYLE: F19 FLAT
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
51208204
SCREW,MACHINE
NSN, MFG P/N
5305001355078
NSN
5305-00-135-5078
MFG
TYCO ELECTRONICS CORPORATION DBA CII TECHNOLOGIES HARTMAN PRODUCTS
Description
DESIGN CONTROL REFERENCE: 51208204
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.305 INCHES NOMINAL
HEAD HEIGHT: 0.075 INCHES NOMINAL
HEAD STYLE: A33 FILLISTER
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: OVERALL SILVER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 74063
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: SILVER
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SC-2023
SCREW,HEX HEAD
NSN, MFG P/N
5305001355126
NSN
5305-00-135-5126
MFG
KOCSIS TECHNOLOGIES INC.
Description
SCREW,HEX HEAD
Related Searches:
SC-2023
SCREW,HEX HEAD
NSN, MFG P/N
5305001355126
NSN
5305-00-135-5126
MFG
KOCSIS TECHNOLOGIES INC.
Description
SCREW,HEX HEAD
Related Searches:
SC2023
SCREW,HEX HEAD
NSN, MFG P/N
5305001355126
NSN
5305-00-135-5126
MFG
UNITED TECHNOLOGIES D IV CORPORATE HEADQUARTERS
Description
SCREW,HEX HEAD
Related Searches:
SC2023
SCREW,HEX HEAD
NSN, MFG P/N
5305001355126
NSN
5305-00-135-5126
MFG
UNITED TECHNOLOGIES D IV CORPORATE HEADQUARTERS
Description
SCREW,HEX HEAD
Related Searches:
SC2023
SCREW,HEX HEAD
NSN, MFG P/N
5305001355126
NSN
5305-00-135-5126
MFG
AMBAC INDUSTRIES INC
Description
SCREW,HEX HEAD
Related Searches:
SC2023
SCREW,HEX HEAD
NSN, MFG P/N
5305001355126
NSN
5305-00-135-5126
MFG
AMBAC INDUSTRIES INC
Description
SCREW,HEX HEAD
Related Searches:
271468
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305001355157
NSN
5305-00-135-5157
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES FASTENER
NOMINAL THREAD DIAMETER: 0.250 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.063 INCHES MINIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.384 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
PRIMARY WASHER STYLE: G9 SPLIT HELICAL RING
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.650 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 1