My Quote Request
5305-00-145-0986
20 Products
6846182-1006
SCREW,MACHINE
NSN, MFG P/N
5305001450986
NSN
5305-00-145-0986
MFG
ALLISON TRANSMISSION INC. DBA ALLISON TRANSMISSION DIV ALLISON TRANSMISSION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.454 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.314 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
328-0512-010
SETSCREW
NSN, MFG P/N
5305001450987
NSN
5305-00-145-0987
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
SETSCREW
Related Searches:
00107-014
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001450992
NSN
5305-00-145-0992
MFG
AGILENT TECHNOLOGIES INC. DIV AGILENT TECHNOLOGIES HEADQUARTERS
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
00107-014
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001450992
NSN
5305-00-145-0992
MFG
HEWLETT PACKARD CO
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
3030-0251
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001450992
NSN
5305-00-145-0992
MFG
HEWLETT PACKARD CO
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
2523
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001450993
NSN
5305-00-145-0993
MFG
ABBATRON LLC DIV ABBATRON LLC
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
2523
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001450993
NSN
5305-00-145-0993
MFG
DIALIGHT CORPORATION
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
1188570
THUMBSCREW
NSN, MFG P/N
5305001450994
NSN
5305-00-145-0994
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 1188570
FASTENER LENGTH: 1.281 INCHES MINIMUM AND 1.344 INCHES MAXIMUM
HEAD DIAMETER: 0.397 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
HEAD HEIGHT: 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
MANUFACTURERS CODE: 10001
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
POINT STYLE: F19 FLAT
SHOULDER DIAMETER: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.234 INCHES MINIMUM AND 0.328 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
72066
SCREW,MACHINE
NSN, MFG P/N
5305001450999
NSN
5305-00-145-0999
MFG
GOODRICH CORPORATION DBA GOODRICH PUMP ENG CTRL SYSTEMS DIV GOODRICH PUMP& ENGINE CONTROL SYSTEMS INC.
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A38 FLAT CHAMFER
HOLE DIAMETER: 0.045 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5640 ASSN STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
72066
SCREW,MACHINE
NSN, MFG P/N
5305001450999
NSN
5305-00-145-0999
MFG
GOODRICH CONTROL SYSTEMS GMBH
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A38 FLAT CHAMFER
HOLE DIAMETER: 0.045 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5640 ASSN STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001451001
NSN
5305-00-145-1001
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18212-27
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS18212-27
SCREW,MACHINE
NSN, MFG P/N
5305001451001
NSN
5305-00-145-1001
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18212-27
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
NOR-CAL SUPPLY CO.INC.
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
QUALIFIED AIR COMPONENTS INC.
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
APCOM INC
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
KING BAG AND MANUFACTURING COMPANY
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
HI-SHEAR CORPORATION
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1125-27
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001451007
NSN
5305-00-145-1007
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
FASTENER LENGTH: 2.048 INCHES MINIMUM AND 2.078 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF