My Quote Request
5305-00-151-0873
20 Products
AN505B10R48
SCREW,MACHINE
NSN, MFG P/N
5305001510873
NSN
5305-00-151-0873
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B10R48
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE3ANDSTYLE2
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92ANDTYPE3ANDSTYLE2
SCREW,MACHINE
NSN, MFG P/N
5305001510873
NSN
5305-00-151-0873
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B10R48
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE3ANDSTYLE2
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN505B516R18
SCREW,MACHINE
NSN, MFG P/N
5305001510876
NSN
5305-00-151-0876
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B516R18
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD DIAMETER: 0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE3ANDSTYLE2C
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.014 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92ANDTYPE3ANDSTYLE2C
SCREW,MACHINE
NSN, MFG P/N
5305001510876
NSN
5305-00-151-0876
FFS92ANDTYPE3ANDSTYLE2C
SCREW,MACHINE
NSN, MFG P/N
5305001510876
NSN
5305-00-151-0876
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B516R18
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD DIAMETER: 0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE3ANDSTYLE2C
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.014 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN505B516R48
SCREW,MACHINE
NSN, MFG P/N
5305001510899
NSN
5305-00-151-0899
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B516R48
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE3ANDSTYLE2C
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92ANDTYPE3ANDSTYLE2C
SCREW,MACHINE
NSN, MFG P/N
5305001510899
NSN
5305-00-151-0899
FFS92ANDTYPE3ANDSTYLE2C
SCREW,MACHINE
NSN, MFG P/N
5305001510899
NSN
5305-00-151-0899
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B516R48
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE3ANDSTYLE2C
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN505-4-3
SCREW,MACHINE
NSN, MFG P/N
5305001510930
NSN
5305-00-151-0930
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-3
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD HEIGHT: 0.039 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92ANDTYPE1ANDSTYLE2S
SCREW,MACHINE
NSN, MFG P/N
5305001510930
NSN
5305-00-151-0930
FFS92ANDTYPE1ANDSTYLE2S
SCREW,MACHINE
NSN, MFG P/N
5305001510930
NSN
5305-00-151-0930
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-3
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD HEIGHT: 0.039 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
0875
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
POWER INDUSTRIES INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
0875
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
LAWRENCE AERONAUTICAL CORP
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
20507-50
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
GOODRICH CORPORATION DIV POWER TRANSMISSION SYSTEMS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
20507-50
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7293-23
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
ONTIC ENGINEERING & MANUFACTURING INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7293-23
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
DONALLCO INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
9111119
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN505-4-6
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE2S
SCREW,MACHINE
NSN, MFG P/N
5305001510933
NSN
5305-00-151-0933
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505-4-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
SCREW MATERIAL: STEEL OR STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN500B6-5
SCREW,MACHINE
NSN, MFG P/N
5305001510958
NSN
5305-00-151-0958
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500B6-5
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN500B65
SCREW,MACHINE
NSN, MFG P/N
5305001510958
NSN
5305-00-151-0958
MFG
AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500B6-5
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN500B65
SCREW,MACHINE
NSN, MFG P/N
5305001510958
NSN
5305-00-151-0958
MFG
FASTBOLT CORP DBA FASTBOLT CANADA
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500B6-5
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC