My Quote Request
5305-00-151-6200
20 Products
5305001516200
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516200
NSN
5305-00-151-6200
5305001516200
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516200
NSN
5305-00-151-6200
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.124 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
FFS200
SETSCREW
NSN, MFG P/N
5305001516157
NSN
5305-00-151-6157
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D16 FOUR SPLINE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OR STEEL COMP 4032 OVERALL
NOMINAL THREAD DIAMETER: 0.060 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS200
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 3 STYLE
POINT STYLE: F18 OVAL
SPEC/STD CONTROLLING DATA:
SPLINE MAJOR DIAMETER: 0.034 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.0255 INCHES MINIMUM AND 0.0260 INCHES MAXIMUM
SPLINE WIDTH: 0.0115 INCHES MINIMUM AND 0.0120 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516158
NSN
5305-00-151-6158
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.112 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: W/S: TRAILER, SEMI, TANK, 5000 GAL, BULK; CATAPULT/ARRESTING GEAR
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL
Related Searches:
MS24667-88
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516158
NSN
5305-00-151-6158
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.112 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: W/S: TRAILER, SEMI, TANK, 5000 GAL, BULK; CATAPULT/ARRESTING GEAR
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL
Related Searches:
MS24667-88
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516158
NSN
5305-00-151-6158
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 1.112 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: W/S: TRAILER, SEMI, TANK, 5000 GAL, BULK; CATAPULT/ARRESTING GEAR
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL
Related Searches:
CAV70-8-9B
SCREW,MACHINE
NSN, MFG P/N
5305001516163
NSN
5305-00-151-6163
MFG
RECON/OPTICAL INC .
Description
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD DIAMETER: 0.326 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.469 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
BYRF1244
SCREW,MACHINE
NSN, MFG P/N
5305001516168
NSN
5305-00-151-6168
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
DESIGN CONTROL REFERENCE: BYRF1244
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 05624
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
BYRF1040
SCREW,MACHINE
NSN, MFG P/N
5305001516169
NSN
5305-00-151-6169
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: BYRF1040
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 05624
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.727 INCHES MINIMUM AND 0.808 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN505C6R26
SCREW,MACHINE
NSN, MFG P/N
5305001516172
NSN
5305-00-151-6172
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505C6R26
FASTENER LENGTH: 1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
HEAD DIAMETER: 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 430 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-764 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-764 FED SPEC 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.418 INCHES MINIMUM AND 1.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-92B
SCREW,MACHINE
NSN, MFG P/N
5305001516172
NSN
5305-00-151-6172
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505C6R26
FASTENER LENGTH: 1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
HEAD DIAMETER: 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 430 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-764 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-764 FED SPEC 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.418 INCHES MINIMUM AND 1.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001516172
NSN
5305-00-151-6172
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505C6R26
FASTENER LENGTH: 1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
HEAD DIAMETER: 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2C STYLE
SCREW MATERIAL: STEEL COMP 430 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-764 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-764 FED SPEC 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.418 INCHES MINIMUM AND 1.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1635-01-4
SCREW,MACHINE
NSN, MFG P/N
5305001516173
NSN
5305-00-151-6173
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.130 INCHES MINIMUM AND 0.142 INCHES MAXIMUM
HEAD HEIGHT: 0.044 INCHES MINIMUM AND 0.053 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.189 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
324826
SETSCREW
NSN, MFG P/N
5305001516175
NSN
5305-00-151-6175
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - ALBUQUERQUE
Description
DESIGN CONTROL REFERENCE: 324826
FASTENER LENGTH: 0.688 INCHES NOMINAL
HEAD DIAMETER: 0.210 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.076 INCHES MINIMUM AND 0.089 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 07187
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
POINT DIAMETER: 0.098 INCHES NOMINAL
POINT LENGTH: 0.250 INCHES NOMINAL
POINT STYLE: F4 DOG
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
ASH0-402
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516185
NSN
5305-00-151-6185
MFG
CARLETON LIFE SUPPORT SYSTEMS INC. DBA COBHAM MISSION SYSTEM
Description
DESIGN CONTROL REFERENCE: ASH0-402
FASTENER LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD DIAMETER: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 99251
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ECLIPSALOY 88 FSCM 88917 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.078 INCHES MINIMUM
THREAD QUANTITY PER INCH: 48
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.079 INCHES NOMINAL
Related Searches:
H0S0202-1-2SS
SETSCREW
NSN, MFG P/N
5305001516190
NSN
5305-00-151-6190
MFG
CARLETON LIFE SUPPORT SYSTEMS INC. DBA COBHAM MISSION SYSTEM
Description
FASTENER LENGTH: 0.166 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: E309-1,BENDIX CORP,NAVIGATION AND CONTROL DIV MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT STYLE: F18 OVAL
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.035 INCHES MINIMUM AND 0.036 INCHES MAXIMUM
Related Searches:
51064-2
SCREW,MACHINE
NSN, MFG P/N
5305001516192
NSN
5305-00-151-6192
MFG
S-TECH INC.
Description
FASTENER LENGTH: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
HEAD DIAMETER: 0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD HEIGHT: 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 268 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 270 OR COPPER ALLOY 274
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-625 FED SPEC 2ND MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.157 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CVC241A4-24
SCREW,MACHINE
NSN, MFG P/N
5305001516194
NSN
5305-00-151-6194
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.516 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.362 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.485 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1635-00-7
SCREW,MACHINE
NSN, MFG P/N
5305001516197
NSN
5305-00-151-6197
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.408 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
HEAD HEIGHT: 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.383 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1300C5T24
THUMBSCREW
NSN, MFG P/N
5305001516198
NSN
5305-00-151-6198
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
HEAD HEIGHT: 0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
HEAD STYLE: C79 THUMB NO. 3
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT STYLE: F19 FLAT
SPECIFICATION/STANDARD DATA: 80205-NAS1300 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.355 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.667 INCHES MINIMUM AND 0.697 INCHES MAXIMUM
Related Searches:
SMB620711
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516199
NSN
5305-00-151-6199
SMB620711
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516199
NSN
5305-00-151-6199
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.343 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL