My Quote Request
5305-00-151-6211
20 Products
3MA123-3-6
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001516211
NSN
5305-00-151-6211
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER: 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
711109
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516200
NSN
5305-00-151-6200
711109
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516200
NSN
5305-00-151-6200
MFG
GE AVIATION SYSTEMS LLC DBA GE AVIATION
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.124 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
SMB374881
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516200
NSN
5305-00-151-6200
SMB374881
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305001516200
NSN
5305-00-151-6200
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.124 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
NAS1096-1-12
SCREW,MACHINE
NSN, MFG P/N
5305001516201
NSN
5305-00-151-6201
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.734 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 8630 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1096 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.608 INCHES MINIMUM AND 0.749 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
Related Searches:
5305001516202
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516202
NSN
5305-00-151-6202
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
FASTENER LENGTH: 0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.860 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
Related Searches:
SMB413508-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516202
NSN
5305-00-151-6202
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
FASTENER LENGTH: 0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.860 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
Related Searches:
11662879-99
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516204
NSN
5305-00-151-6204
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.884 INCHES MINIMUM AND 2.031 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM
Related Searches:
1796743-50
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516206
NSN
5305-00-151-6206
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
Description
FASTENER LENGTH: 1.594 INCHES NOMINAL
HEAD DIAMETER: 0.1767 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D7 SIX SPLINE
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: E309-1,BENDIX CORP,NAVIGATION AND CONTROL DIV MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPLINE MAJOR DIAMETER: 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.098 INCHES NOMINAL
SPLINE WIDTH: 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1796743-50
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516206
NSN
5305-00-151-6206
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER GUIDANCE SYSTEMS DIV
Description
FASTENER LENGTH: 1.594 INCHES NOMINAL
HEAD DIAMETER: 0.1767 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D7 SIX SPLINE
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: E309-1,BENDIX CORP,NAVIGATION AND CONTROL DIV MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPLINE MAJOR DIAMETER: 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.098 INCHES NOMINAL
SPLINE WIDTH: 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1796743-50
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516206
NSN
5305-00-151-6206
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER TEST SYSTEMS DIV
Description
FASTENER LENGTH: 1.594 INCHES NOMINAL
HEAD DIAMETER: 0.1767 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D7 SIX SPLINE
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: E309-1,BENDIX CORP,NAVIGATION AND CONTROL DIV MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPLINE MAJOR DIAMETER: 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.098 INCHES NOMINAL
SPLINE WIDTH: 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1796743-50
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001516206
NSN
5305-00-151-6206
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
FASTENER LENGTH: 1.594 INCHES NOMINAL
HEAD DIAMETER: 0.1767 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D7 SIX SPLINE
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: E309-1,BENDIX CORP,NAVIGATION AND CONTROL DIV MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPLINE MAJOR DIAMETER: 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.098 INCHES NOMINAL
SPLINE WIDTH: 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6517K70P013
SCREW,MACHINE
NSN, MFG P/N
5305001516207
NSN
5305-00-151-6207
MFG
ALL STAINLESS, INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.183 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.874 INCHES MINIMUM AND 0.955 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS514P440-16P
SCREW,MACHINE
NSN, MFG P/N
5305001516207
NSN
5305-00-151-6207
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.183 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.874 INCHES MINIMUM AND 0.955 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001516208
NSN
5305-00-151-6208
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-49B
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
MS51957-49B
SCREW,MACHINE
NSN, MFG P/N
5305001516208
NSN
5305-00-151-6208
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-49B
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
P343-0098-000
SCREW,MACHINE
NSN, MFG P/N
5305001516208
NSN
5305-00-151-6208
MFG
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-49B
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001516209
NSN
5305-00-151-6209
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-51B
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.376 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
MS51957-51B
SCREW,MACHINE
NSN, MFG P/N
5305001516209
NSN
5305-00-151-6209
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-51B
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.376 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
P343-0101-000
SCREW,MACHINE
NSN, MFG P/N
5305001516209
NSN
5305-00-151-6209
MFG
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-51B
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.376 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Related Searches:
3MA123-3-6
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001516211
NSN
5305-00-151-6211
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER: 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF