My Quote Request
5305-00-155-5338
20 Products
N9076
SCREW,MACHINE
NSN, MFG P/N
5305001555338
NSN
5305-00-155-5338
MFG
C. E. NIEHOFF & CO.
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 302
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD LENGTH: 0.188 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
3610-082
SCREW,MACHINE
NSN, MFG P/N
5305001560652
NSN
5305-00-156-0652
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DESIGN CONTROL REFERENCE: 3610-082
FASTENER LENGTH: 0.312 INCHES NOMINAL
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.054 INCHES NOMINAL
HEAD STYLE: A1 HEXAGON
MANUFACTURERS CODE: 66503
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 410
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SP-151 FSCM 66503 MFR REF SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.184 INCHES NOMINAL
Related Searches:
0741910000
SCREW,CUSHION
NSN, MFG P/N
5305001560679
NSN
5305-00-156-0679
MFG
PARKER-HANNIFIN CORPORATION DBA CYLINDER DIV DIV CYLINDER DIVISION
Description
SCREW,CUSHION
Related Searches:
515282-5
SCREW,CUSHION
NSN, MFG P/N
5305001560679
NSN
5305-00-156-0679
MFG
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
Description
SCREW,CUSHION
Related Searches:
741910000
SCREW,CUSHION
NSN, MFG P/N
5305001560679
NSN
5305-00-156-0679
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
SCREW,CUSHION
Related Searches:
106751-06-209C
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
9145-209
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
FIRST AMERICAN SALES CO INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
965813-209C
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
RAYTHEON COMPANY
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
A0L4168-209
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
ALL MANUFACTURERS INC. DBA ALLIED MANUFACTURERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
AIC813-06-R10
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
AIC813-06R2
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
E125-209
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
E125-209
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
FS2003-06/209C
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
PBF1068-209C
SCREW,MACHINE
NSN, MFG P/N
5305001561500
NSN
5305-00-156-1500
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.472 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
5305001561977
SCREW,MACHINE
NSN, MFG P/N
5305001561977
NSN
5305-00-156-1977
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1100E3-8
SCREW,MACHINE
NSN, MFG P/N
5305001561977
NSN
5305-00-156-1977
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001562238
NSN
5305-00-156-2238
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.216 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.648 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
225561
SCREW,MACHINE
NSN, MFG P/N
5305001562240
NSN
5305-00-156-2240
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 225561
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 21450
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.216 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.398 INCHES MINIMUM AND 0.429 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001562240
NSN
5305-00-156-2240
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 225561
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 21450
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.216 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.398 INCHES MINIMUM AND 0.429 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF