My Quote Request
5305-00-156-2679
20 Products
AN500AC8-7
SCREW,MACHINE
NSN, MFG P/N
5305001562679
NSN
5305-00-156-2679
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-7
FASTENER LENGTH: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 4S STYLE
SCREW MATERIAL: STEEL COMP 430 OR STEEL COMP 302
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MILS7839
SCREW,MACHINE
NSN, MFG P/N
5305001562632
NSN
5305-00-156-2632
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN509-516R23
FASTENER LENGTH: 1.469 INCHES MINIMUM AND 1.516 INCHES MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.313 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.547 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MILS7839
SCREW,MACHINE
NSN, MFG P/N
5305001562632
NSN
5305-00-156-2632
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN509-516R23
FASTENER LENGTH: 1.469 INCHES MINIMUM AND 1.516 INCHES MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.313 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.547 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN509-516R12
SCREW,MACHINE
NSN, MFG P/N
5305001562633
NSN
5305-00-156-2633
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN509-516R12
FASTENER LENGTH: 0.781 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.547 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MILS7839
SCREW,MACHINE
NSN, MFG P/N
5305001562633
NSN
5305-00-156-2633
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN509-516R12
FASTENER LENGTH: 0.781 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.547 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MILS7839
SCREW,MACHINE
NSN, MFG P/N
5305001562633
NSN
5305-00-156-2633
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN509-516R12
FASTENER LENGTH: 0.781 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.547 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
7601727
SCREW,MACHINE
NSN, MFG P/N
5305001562634
NSN
5305-00-156-2634
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.343 INCHES MINIMUM AND 1.389 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA: 80244-AN509/CANCELED/ PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 81349- IL-S-7839 GOVERNMENT SPECIFICATION
THREAD CLASS: 3A
THREAD LENGTH: 0.577 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN509-516R21
SCREW,MACHINE
NSN, MFG P/N
5305001562634
NSN
5305-00-156-2634
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.343 INCHES MINIMUM AND 1.389 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA: 80244-AN509/CANCELED/ PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 81349- IL-S-7839 GOVERNMENT SPECIFICATION
THREAD CLASS: 3A
THREAD LENGTH: 0.577 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MIL-S-7839
SCREW,MACHINE
NSN, MFG P/N
5305001562634
NSN
5305-00-156-2634
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.343 INCHES MINIMUM AND 1.389 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SCREW MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA: 80244-AN509/CANCELED/ PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 81349- IL-S-7839 GOVERNMENT SPECIFICATION
THREAD CLASS: 3A
THREAD LENGTH: 0.577 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
0457-218
SCREW,MACHINE
NSN, MFG P/N
5305001562674
NSN
5305-00-156-2674
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC6-3
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.138 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720,COMP FM MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720,COMP G MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-763,CL 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: ONE DRILLED HOLE IN HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN500AC6-3
SCREW,MACHINE
NSN, MFG P/N
5305001562674
NSN
5305-00-156-2674
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC6-3
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.138 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720,COMP FM MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720,COMP G MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-763,CL 4 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: ONE DRILLED HOLE IN HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AC501AC6-4
SCREW,MACHINE
NSN, MFG P/N
5305001562676
NSN
5305-00-156-2676
MFG
AIR CORPS STANDARDS UNDER CUSTODIANISHIP OF THE AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN501AC6-4
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN501AC6-4
SCREW,MACHINE
NSN, MFG P/N
5305001562676
NSN
5305-00-156-2676
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN501AC6-4
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
Related Searches:
0457-274
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV MS2
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
0457-274
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
117455
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-SOUTH BEND BENDIX DR
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
189906
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN500AC8-6
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AS80677
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
CHICAGO PNEUMATIC TOOL CO
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92ANDTYPE1ANDSTYLE4S
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
FFS92ANDTYPE1ANDSTYLE4S
SCREW,MACHINE
NSN, MFG P/N
5305001562678
NSN
5305-00-156-2678
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AC8-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 35000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92ANDTYPE1ANDSTYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763A,SERIES 400 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC