My Quote Request
5305-00-170-1424
20 Products
1106-032
SCREW,MACHINE
NSN, MFG P/N
5305001701424
NSN
5305-00-170-1424
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
EXTENDED WASHER DIAMETER: 0.312 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.230 INCHES NOMINAL
HEAD STYLE: A9 DOUBLE HEXAGON W/ HOLE
III END ITEM IDENTIFICATION: W/S: ENGINE, AIRCRAFT TF-34
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: IRON ALLOY 660
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.533 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.219 INCHES NOMINAL
Related Searches:
MS9555-08
SCREW,MACHINE
NSN, MFG P/N
5305001701424
NSN
5305-00-170-1424
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
EXTENDED WASHER DIAMETER: 0.312 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.230 INCHES NOMINAL
HEAD STYLE: A9 DOUBLE HEXAGON W/ HOLE
III END ITEM IDENTIFICATION: W/S: ENGINE, AIRCRAFT TF-34
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: IRON ALLOY 660
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.533 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.219 INCHES NOMINAL
Related Searches:
MS9555-08
SCREW,MACHINE
NSN, MFG P/N
5305001701424
NSN
5305-00-170-1424
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
EXTENDED WASHER DIAMETER: 0.312 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM
FASTENER LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.230 INCHES NOMINAL
HEAD STYLE: A9 DOUBLE HEXAGON W/ HOLE
III END ITEM IDENTIFICATION: W/S: ENGINE, AIRCRAFT TF-34
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: IRON ALLOY 660
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.533 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.219 INCHES NOMINAL
Related Searches:
MS9564-12
SCREW,MACHINE
NSN, MFG P/N
5305001701428
NSN
5305-00-170-1428
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9564-12
EXTENDED WASHER DIAMETER: 0.312 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM
FASTENER LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.230 INCHES NOMINAL
HEAD HOLE CONFIGURATION STYLE: C5 HEXAGON LONGITUDINAL HOLE
HEAD STYLE: A9 DOUBLE HEXAGON W/ HOLE
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 4
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: IRON ALLOY 660
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.568 INCHES MINIMUM AND 0.648 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.219 INCHES NOMINAL
Related Searches:
MS9564-04
SCREW,MACHINE
NSN, MFG P/N
5305001701546
NSN
5305-00-170-1546
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9564-04
EXTENDED WASHER DIAMETER: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM
FASTENER LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C5 HEXAGON LONGITUDINAL HOLE
HEAD STYLE: A9 DOUBLE HEXAGON W/ HOLE
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 4
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: IRON ALLOY 660
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.283 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.219 INCHES NOMINAL
Related Searches:
NAS1190-4T6L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001701552
NSN
5305-00-170-1552
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1190 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.273 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
1951-2S
SCREW,MACHINE
NSN, MFG P/N
5305001701557
NSN
5305-00-170-1557
MFG
TRICO PRODUCTS CORPORATION
Description
DESIGN CONTROL REFERENCE: 1951-2S
FASTENER LENGTH: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 60703
NOMINAL THREAD DIAMETER: 0.125 INCHES
SCREW MATERIAL: STEEL COMP 305
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1951-2S
SCREW,MACHINE
NSN, MFG P/N
5305001701557
NSN
5305-00-170-1557
MFG
TRICO PRODUCTS CORPORATION
Description
DESIGN CONTROL REFERENCE: 1951-2S
FASTENER LENGTH: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM
HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
HEAD HEIGHT: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 60703
NOMINAL THREAD DIAMETER: 0.125 INCHES
SCREW MATERIAL: STEEL COMP 305
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS664V5HT
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001701606
NSN
5305-00-170-1606
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.723 INCHES MINIMUM AND 0.753 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621,6AL-4V ASSN STD 1ST MATERIAL RESPONSE OR AMS 4928 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS664 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.401 INCHES MINIMUM AND 0.451 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
11601730-2
THUMBSCREW
NSN, MFG P/N
5305001701716
NSN
5305-00-170-1716
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
HEAD HEIGHT: 0.734 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
HEAD STYLE: C79 THUMB NO. 3
MATERIAL: STEEL COMP 1015 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.652 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.651 INCHES MINIMUM AND 0.713 INCHES MAXIMUM
Related Searches:
11601730-2
THUMBSCREW
NSN, MFG P/N
5305001701716
NSN
5305-00-170-1716
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
HEAD HEIGHT: 0.734 INCHES MINIMUM AND 0.796 INCHES MAXIMUM
HEAD STYLE: C79 THUMB NO. 3
MATERIAL: STEEL COMP 1015 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.652 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.651 INCHES MINIMUM AND 0.713 INCHES MAXIMUM
Related Searches:
NAS1352C04-31
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001702743
NSN
5305-00-170-2743
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.898 INCHES MINIMUM AND 1.938 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
0312469-2
SCREW,MACHINE
NSN, MFG P/N
5305001702923
NSN
5305-00-170-2923
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
A07725
SCREW,MACHINE
NSN, MFG P/N
5305001702923
NSN
5305-00-170-2923
MFG
MBDA UK LTD
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001702923
NSN
5305-00-170-2923
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS24693-26B
SCREW,MACHINE
NSN, MFG P/N
5305001702923
NSN
5305-00-170-2923
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS24693-26B
SCREW,MACHINE
NSN, MFG P/N
5305001702923
NSN
5305-00-170-2923
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS24693C26B
SCREW,MACHINE
NSN, MFG P/N
5305001702923
NSN
5305-00-170-2923
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1352C8-10
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001702931
NSN
5305-00-170-2931
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OR ASTM-A493 AISI XM-7 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.441 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM
Related Searches:
106712-3-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001702940
NSN
5305-00-170-2940
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.635 INCHES MINIMUM AND 0.682 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF