My Quote Request
5305-00-247-4010
20 Products
3M123-3-6P
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305002474010
NSN
5305-00-247-4010
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
615956-92
SCREW,MACHINE
NSN, MFG P/N
5305002470968
NSN
5305-00-247-0968
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
SCREW,MACHINE
Related Searches:
740299-98
SCREW,MACHINE
NSN, MFG P/N
5305002470973
NSN
5305-00-247-0973
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
SCREW,MACHINE
Related Searches:
615956-95
SCREW,MACHINE
NSN, MFG P/N
5305002470974
NSN
5305-00-247-0974
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
SCREW,MACHINE
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305002470991
NSN
5305-00-247-0991
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35219-23
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY MATERIAL
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 62000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: ALUMINUM ALLOY 2024
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: ANODIZE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.169 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35219-23
SCREW,MACHINE
NSN, MFG P/N
5305002470991
NSN
5305-00-247-0991
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35219-23
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY MATERIAL
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 62000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: ALUMINUM ALLOY 2024
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: ANODIZE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.169 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNF
Related Searches:
241-105-1-2SS
SCREW,MACHINE
NSN, MFG P/N
5305002471296
NSN
5305-00-247-1296
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
Description
DESIGN CONTROL REFERENCE: MFFIL-0-105-1/2SS
FASTENER LENGTH: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM
HEAD HEIGHT: 0.039 INCHES MINIMUM AND 0.049 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 07679
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.309 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
241-105-1-2SS
SCREW,MACHINE
NSN, MFG P/N
5305002471296
NSN
5305-00-247-1296
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
DESIGN CONTROL REFERENCE: MFFIL-0-105-1/2SS
FASTENER LENGTH: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM
HEAD HEIGHT: 0.039 INCHES MINIMUM AND 0.049 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 07679
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.309 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MFFIL-0-105-1/2SS
SCREW,MACHINE
NSN, MFG P/N
5305002471296
NSN
5305-00-247-1296
MFG
HARDWARE SPECIALTY CO. INC.
Description
DESIGN CONTROL REFERENCE: MFFIL-0-105-1/2SS
FASTENER LENGTH: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM
HEAD HEIGHT: 0.039 INCHES MINIMUM AND 0.049 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 07679
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.309 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-111
SCREW,WOOD
NSN, MFG P/N
5305002471320
NSN
5305-00-247-1320
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35492-911
FASTENER LENGTH: 4.890 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
HEAD DIAMETER: 0.447 INCHES MINIMUM AND 0.491 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-111
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES
NONMACHINE THREAD STYLE: A15 WOOD SCREW (TYPE WD)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS35492-911
SCREW,WOOD
NSN, MFG P/N
5305002471320
NSN
5305-00-247-1320
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35492-911
FASTENER LENGTH: 4.890 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
HEAD DIAMETER: 0.447 INCHES MINIMUM AND 0.491 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-111
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES
NONMACHINE THREAD STYLE: A15 WOOD SCREW (TYPE WD)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
MS35234-65
SCREW,MACHINE
NSN, MFG P/N
5305002471325
NSN
5305-00-247-1325
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35234-65
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 70000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL COMP 1211
SCREW SURFACE TREATMENT: PASSIVATE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
226-405SSB
SCREW,MACHINE
NSN, MFG P/N
5305002472586
NSN
5305-00-247-2586
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
SCREW,MACHINE
Related Searches:
MBH405SSB
SCREW,MACHINE
NSN, MFG P/N
5305002472586
NSN
5305-00-247-2586
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
SCREW,MACHINE
Related Searches:
92511060600
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002472592
NSN
5305-00-247-2592
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
HEAD DIAMETER: 0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D7 SIX SPLINE
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPLINE MAJOR DIAMETER: 0.097 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.082 INCHES MAXIMUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.297 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS1154V36D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305002473985
NSN
5305-00-247-3985
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.425 INCHES MINIMUM AND 2.475 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 2.551 INCHES MINIMUM AND 2.581 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
HEAD DIAMETER: 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MAS 621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M123-3-6P
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305002474010
NSN
5305-00-247-4010
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3M123-3-6P
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305002474010
NSN
5305-00-247-4010
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3M123-3-6P
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305002474010
NSN
5305-00-247-4010
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3M123-3-6P
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305002474010
NSN
5305-00-247-4010
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5736 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF