My Quote Request
5305-00-274-0588
20 Products
A61-8
SCREW,MACHINE
NSN, MFG P/N
5305002740588
NSN
5305-00-274-0588
MFG
HARVARD INDUSTRIES
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN525-10-22
EXTENDED WASHER DIAMETER: 0.437 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.025 INCHES NOMINAL
FASTENER LENGTH: 1.375 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.094 INCHES NOMINAL
HEAD STYLE: A29 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-689 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.406 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN525-10-22
SCREW,MACHINE
NSN, MFG P/N
5305002740588
NSN
5305-00-274-0588
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN525-10-22
EXTENDED WASHER DIAMETER: 0.437 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.025 INCHES NOMINAL
FASTENER LENGTH: 1.375 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.094 INCHES NOMINAL
HEAD STYLE: A29 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-689 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.406 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
12Z7PC620
SCREW,MACHINE
NSN, MFG P/N
5305002740590
NSN
5305-00-274-0590
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.099 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNF
Related Searches:
346446PC333
SCREW,MACHINE
NSN, MFG P/N
5305002740590
NSN
5305-00-274-0590
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.099 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92TYPE1STYLE2S
SCREW,MACHINE
NSN, MFG P/N
5305002740590
NSN
5305-00-274-0590
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.099 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE2S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNF
Related Searches:
12Z7PC119
SCREW,MACHINE
NSN, MFG P/N
5305002740604
NSN
5305-00-274-0604
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL COMP 1117
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MINIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
43S16451-40
SCREW,MACHINE
NSN, MFG P/N
5305002740604
NSN
5305-00-274-0604
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL COMP 1117
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MINIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305002740604
NSN
5305-00-274-0604
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
FASTENER LENGTH: 0.625 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL COMP 1117
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MINIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
43-S-58533-715
SCREW,MACHINE
NSN, MFG P/N
5305002740613
NSN
5305-00-274-0613
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.249 INCHES MINIMUM AND 0.263 INCHES MAXIMUM
HEAD HEIGHT: 0.064 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.125 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.106 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
319136PC4
SCREW,MACHINE
NSN, MFG P/N
5305002740642
NSN
5305-00-274-0642
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.496 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305002740642
NSN
5305-00-274-0642
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.496 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
Related Searches:
426528PC263
SCREW,MACHINE
NSN, MFG P/N
5305002740665
NSN
5305-00-274-0665
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 360
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
687775
SCREW,MACHINE
NSN, MFG P/N
5305002740665
NSN
5305-00-274-0665
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 360
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
687949
SCREW,MACHINE
NSN, MFG P/N
5305002740665
NSN
5305-00-274-0665
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 360
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE8S
SCREW,MACHINE
NSN, MFG P/N
5305002740665
NSN
5305-00-274-0665
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 360
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
Q5421-02-04
SCREW,MACHINE
NSN, MFG P/N
5305002740665
NSN
5305-00-274-0665
MFG
GE AVIATION SYSTEMS LLC
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE8S
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 8S STYLE
SCREW MATERIAL: COPPER ALLOY 360
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
177004PC656
SCREW,MACHINE
NSN, MFG P/N
5305002740672
NSN
5305-00-274-0672
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 43S16458-185
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 94135
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
43S16458-185
SCREW,MACHINE
NSN, MFG P/N
5305002740672
NSN
5305-00-274-0672
MFG
NAVAL ORDNANCE STANDARDS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 43S16458-185
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 94135
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
43S16458-185
SCREW,MACHINE
NSN, MFG P/N
5305002740672
NSN
5305-00-274-0672
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 43S16458-185
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.155 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 94135
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
12Z36PC281
SCREW,MACHINE
NSN, MFG P/N
5305002740676
NSN
5305-00-274-0676
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.102 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC