My Quote Request
5305-00-398-0172
20 Products
411R312H01
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305003980172
NSN
5305-00-398-0172
411R312H01
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305003980172
NSN
5305-00-398-0172
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.670 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.030 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
HEAD HEIGHT: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 431 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.360 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
Related Searches:
514R003H02
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305003980357
NSN
5305-00-398-0357
514R003H02
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305003980357
NSN
5305-00-398-0357
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA ELECTRONIC SYSTEMS
Description
DESIGN CONTROL REFERENCE: 514R003H02
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.645 INCHES MINIMUM AND 0.655 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.685 INCHES MINIMUM AND 0.695 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 1.390 INCHES MINIMUM AND 1.450 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
HEAD HEIGHT: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 18323
MATERIAL: STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SECOND DIAMETER FROM HEAD: 0.189 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THIRD DIAMETER FROM HEAD: 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
Related Searches:
720270-1
SCREW,ECCENTRIC
NSN, MFG P/N
5305003980482
NSN
5305-00-398-0482
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
DESIGN CONTROL REFERENCE: 720270-1
III END ITEM IDENTIFICATION: INDICATOR,COURSE
MANUFACTURERS CODE: 55972
THE MANUFACTURERS DATA:
Related Searches:
720270-1
SCREW,ECCENTRIC
NSN, MFG P/N
5305003980482
NSN
5305-00-398-0482
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
Description
DESIGN CONTROL REFERENCE: 720270-1
III END ITEM IDENTIFICATION: INDICATOR,COURSE
MANUFACTURERS CODE: 55972
THE MANUFACTURERS DATA:
Related Searches:
950728-11
SCREW,MACHINE
NSN, MFG P/N
5305003980739
NSN
5305-00-398-0739
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DBA NAVIGATION SYSTEMS DIVISION DIV NAVIGATION SYSTEMS DIVISION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: AH728-11
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 28971
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.533 INCHES MINIMUM AND 0.563 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AH728-11
SCREW,MACHINE
NSN, MFG P/N
5305003980739
NSN
5305-00-398-0739
MFG
AIRHARDWARE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: AH728-11
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 28971
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.533 INCHES MINIMUM AND 0.563 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
50B7952-2
SCREW,PLATFORM,JACK
NSN, MFG P/N
5305003984961
NSN
5305-00-398-4961
MFG
SAN ANTONIO AIR LOGISTICS CENTER
Description
SCREW,PLATFORM,JACK
Related Searches:
50B7952-2
SCREW,PLATFORM,JACK
NSN, MFG P/N
5305003984961
NSN
5305-00-398-4961
MFG
DEPARTMENT OF THE AIR FORCE
Description
SCREW,PLATFORM,JACK
Related Searches:
50B7952-2
SCREW,PLATFORM,JACK
NSN, MFG P/N
5305003984961
NSN
5305-00-398-4961
MFG
AIR FORCE LOGISTICS COMMAND 88 0SS OSE
Description
SCREW,PLATFORM,JACK
Related Searches:
50B7952-2
SCREW,PLATFORM,JACK
NSN, MFG P/N
5305003984961
NSN
5305-00-398-4961
MFG
WARNER ROBINS AIR LOGISTICS CENTER
Description
SCREW,PLATFORM,JACK
Related Searches:
119729PC359
SCREW,SUCTION VALVE
NSN, MFG P/N
5305003989118
NSN
5305-00-398-9118
MFG
DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 0.806 IN. SQUARE; THD DATA 1.250 IN.-12 UNF; EXTERNAL RH; LARGEST END RECESSED; 1.210 IN. DIA BY 1.000 IN. DEEP THD DATA 1.750 IN.-10 UNS RH; 0.188 IN. DIA; 0.202 IN. THK
Related Searches:
1781B
SCREW,SUCTION VALVE
NSN, MFG P/N
5305003989118
NSN
5305-00-398-9118
MFG
DRESSER-RAND COMPANY DBA RECIPROCATING PRODUCTS DIV
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 0.806 IN. SQUARE; THD DATA 1.250 IN.-12 UNF; EXTERNAL RH; LARGEST END RECESSED; 1.210 IN. DIA BY 1.000 IN. DEEP THD DATA 1.750 IN.-10 UNS RH; 0.188 IN. DIA; 0.202 IN. THK
Related Searches:
1781B
SCREW,SUCTION VALVE
NSN, MFG P/N
5305003989118
NSN
5305-00-398-9118
MFG
DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL; 0.806 IN. SQUARE; THD DATA 1.250 IN.-12 UNF; EXTERNAL RH; LARGEST END RECESSED; 1.210 IN. DIA BY 1.000 IN. DEEP THD DATA 1.750 IN.-10 UNS RH; 0.188 IN. DIA; 0.202 IN. THK
Related Searches:
NAS1221-3E5
SCREW,MACHINE
NSN, MFG P/N
5305003990194
NSN
5305-00-399-0194
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.636 INCHES MINIMUM AND 0.666 INCHES MAXIMUM
HEAD DIAMETER: 0.344 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1221 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.314 INCHES MINIMUM AND 0.364 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS662-2LER4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305003990197
NSN
5305-00-399-0197
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MATERIAL: STEEL COMP 1010 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS662 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.148 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS662-2LER4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305003990197
NSN
5305-00-399-0197
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
MATERIAL: STEEL COMP 1010 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS662 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.148 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
HT291-6-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305003990212
NSN
5305-00-399-0212
MFG
HI-SHEAR CORPORATION
Description
SCREW,CLOSE TOLERANCE
Related Searches:
HT4024L6-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305003990212
NSN
5305-00-399-0212
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
SCREW,CLOSE TOLERANCE
Related Searches:
HT4024L6-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305003990212
NSN
5305-00-399-0212
MFG
SPS TECHNOLOGIES INC
Description
SCREW,CLOSE TOLERANCE
Related Searches:
HT4024L6-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305003990212
NSN
5305-00-399-0212
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
SCREW,CLOSE TOLERANCE