My Quote Request
5305-00-451-1862
20 Products
8261-4
SCREW,EXTENSION,JAC
NSN, MFG P/N
5305004511862
NSN
5305-00-451-1862
MFG
COLUMBUS JACK CORPORATION
Description
DESIGN CONTROL REFERENCE: 8261-4
GENERAL CHARACTERISTICS ITEM DESCRIPTION: MATL ST,QQ-S-624; 30.500 IN. LG; 4.062 IN. DIA; THREADS AT BOTH END; SINGLE LEAD TWO THREADS PER INCH RH
MANUFACTURERS CODE: 00994
THE MANUFACTURERS DATA:
Related Searches:
8261-4
SCREW,EXTENSION,JAC
NSN, MFG P/N
5305004511862
NSN
5305-00-451-1862
MFG
AGE LOGISTICS CORP ORATION
Description
DESIGN CONTROL REFERENCE: 8261-4
GENERAL CHARACTERISTICS ITEM DESCRIPTION: MATL ST,QQ-S-624; 30.500 IN. LG; 4.062 IN. DIA; THREADS AT BOTH END; SINGLE LEAD TWO THREADS PER INCH RH
MANUFACTURERS CODE: 00994
THE MANUFACTURERS DATA:
Related Searches:
ABS20642-4F9
SCREW,MACHINE
NSN, MFG P/N
5305004511936
NSN
5305-00-451-1936
MFG
PATTONAIR USA INC UNISEAL DIV
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.863 INCHES MINIMUM AND 0.893 INCHES MAXIMUM
HEAD DIAMETER: 0.600 INCHES MINIMUM AND 0.666 INCHES MAXIMUM
HEAD HEIGHT: 0.097 INCHES NOMINAL
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES
SPECIAL FEATURES: FURNISHED WITH ONE FLAT TEFLON WASHER AND ONE BUNA RUBBER O RING
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ABS20642-4F9
SCREW,MACHINE
NSN, MFG P/N
5305004511936
NSN
5305-00-451-1936
MFG
ABSCOA INDUSTRIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.863 INCHES MINIMUM AND 0.893 INCHES MAXIMUM
HEAD DIAMETER: 0.600 INCHES MINIMUM AND 0.666 INCHES MAXIMUM
HEAD HEIGHT: 0.097 INCHES NOMINAL
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES
SPECIAL FEATURES: FURNISHED WITH ONE FLAT TEFLON WASHER AND ONE BUNA RUBBER O RING
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
STSBA001F08P09
SCREW,MACHINE
NSN, MFG P/N
5305004511936
NSN
5305-00-451-1936
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.863 INCHES MINIMUM AND 0.893 INCHES MAXIMUM
HEAD DIAMETER: 0.600 INCHES MINIMUM AND 0.666 INCHES MAXIMUM
HEAD HEIGHT: 0.097 INCHES NOMINAL
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES
SPECIAL FEATURES: FURNISHED WITH ONE FLAT TEFLON WASHER AND ONE BUNA RUBBER O RING
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
10931
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305004511947
NSN
5305-00-451-1947
MFG
EATON AEROSPACE LLC
Description
DESIGN CONTROL REFERENCE: 10931
FASTENER LENGTH: 1.750 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.312 INCHES NOMINAL
HEAD HEIGHT: 0.190 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 62983
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL
Related Searches:
51-18-310-24
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305004511953
NSN
5305-00-451-1953
MFG
SOUTHCO INC.
Description
FASTENER LENGTH: 0.906 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING STAND-OFF STEEL CORROSION RESISTING FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: HEAD VERTICALLY KNURLED
SURFACE TREATMENT: PASSIVATE STAND-OFF PASSIVATE FASTENER
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.281 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
804074-2
SCREW,MACHINE
NSN, MFG P/N
5305004512923
NSN
5305-00-451-2923
MFG
AVCO CORP
Description
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SMB415043-2
SCREW,MACHINE
NSN, MFG P/N
5305004512923
NSN
5305-00-451-2923
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SMC415027
THUMBSCREW
NSN, MFG P/N
5305004512924
NSN
5305-00-451-2924
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.328 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SMC454861
THUMBSCREW
NSN, MFG P/N
5305004512924
NSN
5305-00-451-2924
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.328 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
CVC241A4-27
SCREW,MACHINE
NSN, MFG P/N
5305004513328
NSN
5305-00-451-3328
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: CVC241A4-27
FASTENER LENGTH: 1.704 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.362 INCHES MINIMUM AND 0.407 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 80378
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.423 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
639122-450
SCREW,MACHINE
NSN, MFG P/N
5305004513376
NSN
5305-00-451-3376
MFG
NAVCOM DEFENSE ELECTRONICS INC.
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-129
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.448 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
9-16-4810-00
SCREW,MACHINE
NSN, MFG P/N
5305004513376
NSN
5305-00-451-3376
MFG
REXNORD INDUSTRIES LLC DBA STEARNS DIV DIV STEARNS OPERATION
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-129
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.448 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS51957-129
SCREW,MACHINE
NSN, MFG P/N
5305004513376
NSN
5305-00-451-3376
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-129
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.448 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
30481-502
THUMBSCREW
NSN, MFG P/N
5305004513410
NSN
5305-00-451-3410
MFG
DEWEY ELECTRONICS CORPORATION THE
Description
THUMBSCREW
Related Searches:
5650556
SCREW,SHOULDER
NSN, MFG P/N
5305004513412
NSN
5305-00-451-3412
MFG
ITT CORPORATION DBA ITT GILFILLAN
Description
SCREW,SHOULDER
Related Searches:
5700631
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305004513413
NSN
5305-00-451-3413
5700631
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305004513413
NSN
5305-00-451-3413
MFG
ITT CORPORATION DBA ITT GILFILLAN
Description
SCREW,EXTERNALLY RELIEVED BODY
Related Searches:
5650661
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305004513414
NSN
5305-00-451-3414
5650661
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305004513414
NSN
5305-00-451-3414
MFG
ITT CORPORATION DBA ITT GILFILLAN
Description
SCREW,EXTERNALLY RELIEVED BODY
Related Searches:
1943386
SCREW,TAPPING
NSN, MFG P/N
5305004513425
NSN
5305-00-451-3425
MFG
REMY INC.
Description
DESIGN CONTROL REFERENCE: 1943386
EXTENDED WASHER DIAMETER: 0.370 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
FASTENER LENGTH: 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.174 INCHES MAXIMUM
HEAD STYLE: C7 HEXAGON EXTENDED WASHER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 1LW55
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A12 DOG TYPE (TYPE B OR C)
SURFACE TREATMENT: CADMIUM AND DICHROMATE OVERALL
THE MANUFACTURERS DATA:
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM