My Quote Request
5305-00-455-0343
20 Products
HT06R32F12
SCREW,MACHINE
NSN, MFG P/N
5305004550343
NSN
5305-00-455-0343
MFG
PENTACON AEROSPACE GROUP INC
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.294 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: FURNISHED W/ONE FLOUROSILICONE RUBBER O-RING PER MIL-R-25988
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
HT06R32F12
SCREW,MACHINE
NSN, MFG P/N
5305004550343
NSN
5305-00-455-0343
MFG
ANIXTER INC. DBA ANIXTER
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.294 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: FURNISHED W/ONE FLOUROSILICONE RUBBER O-RING PER MIL-R-25988
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS3213-18
SCREW,MACHINE
NSN, MFG P/N
5305004550343
NSN
5305-00-455-0343
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.294 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: FURNISHED W/ONE FLOUROSILICONE RUBBER O-RING PER MIL-R-25988
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS3213-18
SCREW,MACHINE
NSN, MFG P/N
5305004550343
NSN
5305-00-455-0343
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.294 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: FURNISHED W/ONE FLOUROSILICONE RUBBER O-RING PER MIL-R-25988
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
R6&32X75
SCREW,MACHINE
NSN, MFG P/N
5305004550343
NSN
5305-00-455-0343
MFG
A P M HEXSEAL CORPORATION
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.294 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305 OR STEEL
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: FURNISHED W/ONE FLOUROSILICONE RUBBER O-RING PER MIL-R-25988
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
12W9044-7
SCREW,SHOULDER
NSN, MFG P/N
5305004550382
NSN
5305-00-455-0382
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.965 INCHES MINIMUM AND 0.995 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM
HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM FIRST SHOULDER 0.3712 INCHES MINIMUM AND 0.3717 INCHES MAXIMUM SECOND SHOULDER
SHOULDER LENGTH: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM FIRST SHOULDER 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM SECOND SHOULDER
SHOULDER SHAPE: ROUND ALL SHOULDERS
SPECIAL FEATURES: SHOULDER 16 MICROINCH FINISH
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.316 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC4533-6-1
SCREW,SHOULDER
NSN, MFG P/N
5305004550382
NSN
5305-00-455-0382
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.965 INCHES MINIMUM AND 0.995 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM
HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM FIRST SHOULDER 0.3712 INCHES MINIMUM AND 0.3717 INCHES MAXIMUM SECOND SHOULDER
SHOULDER LENGTH: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM FIRST SHOULDER 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM SECOND SHOULDER
SHOULDER SHAPE: ROUND ALL SHOULDERS
SPECIAL FEATURES: SHOULDER 16 MICROINCH FINISH
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.316 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
C4533-6-1
SCREW,SHOULDER
NSN, MFG P/N
5305004550382
NSN
5305-00-455-0382
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.965 INCHES MINIMUM AND 0.995 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM
HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM FIRST SHOULDER 0.3712 INCHES MINIMUM AND 0.3717 INCHES MAXIMUM SECOND SHOULDER
SHOULDER LENGTH: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM FIRST SHOULDER 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM SECOND SHOULDER
SHOULDER SHAPE: ROUND ALL SHOULDERS
SPECIAL FEATURES: SHOULDER 16 MICROINCH FINISH
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.316 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VT1658-6-1
SCREW,SHOULDER
NSN, MFG P/N
5305004550382
NSN
5305-00-455-0382
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.965 INCHES MINIMUM AND 0.995 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.081 INCHES MINIMUM AND 1.111 INCHES MAXIMUM
HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM FIRST SHOULDER 0.3712 INCHES MINIMUM AND 0.3717 INCHES MAXIMUM SECOND SHOULDER
SHOULDER LENGTH: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM FIRST SHOULDER 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM SECOND SHOULDER
SHOULDER SHAPE: ROUND ALL SHOULDERS
SPECIAL FEATURES: SHOULDER 16 MICROINCH FINISH
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.316 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
27351-501-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305004550398
NSN
5305-00-455-0398
27351-501-1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305004550398
NSN
5305-00-455-0398
MFG
BOEING COMPANY THE DBA BOEING DIV DEFENSE SPACE & SECURITY - NETWORK & SPACE SYSTEMS
Description
DESIGN CONTROL REFERENCE: 27351-501-1
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 94756
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.200 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
42302
SCREW,TAPPING
NSN, MFG P/N
5305004550403
NSN
5305-00-455-0403
MFG
FEDERAL SCREW PRODUCTS INC .
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51862-4
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
42302ADX
SCREW,TAPPING
NSN, MFG P/N
5305004550403
NSN
5305-00-455-0403
MFG
AIRDALE EXPRESS LLC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51862-4
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
FFS107
SCREW,TAPPING
NSN, MFG P/N
5305004550403
NSN
5305-00-455-0403
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51862-4
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
MS51862-4
SCREW,TAPPING
NSN, MFG P/N
5305004550403
NSN
5305-00-455-0403
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51862-4
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
0N047463
SCREW,MACHINE
NSN, MFG P/N
5305004550405
NSN
5305-00-455-0405
MFG
NATIONAL SECURITY AGENCY
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
FASTENER LENGTH: 0.507 INCHES MAXIMUM
HEAD DIAMETER: 0.164 INCHES NOMINAL
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,CLASS 300 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
135277
SCREW,MACHINE
NSN, MFG P/N
5305004550405
NSN
5305-00-455-0405
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
FASTENER LENGTH: 0.507 INCHES MAXIMUM
HEAD DIAMETER: 0.164 INCHES NOMINAL
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,CLASS 300 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS107
SCREW,TAPPING
NSN, MFG P/N
5305004550406
NSN
5305-00-455-0406
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
MS51862-5
SCREW,TAPPING
NSN, MFG P/N
5305004550406
NSN
5305-00-455-0406
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
NASM51862-5
SCREW,TAPPING
NSN, MFG P/N
5305004550406
NSN
5305-00-455-0406
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NONDEFINITIVE SPEC/STD DATA: AB TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
64228V5-13
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305004550416
NSN
5305-00-455-0416
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER: 0.572 INCHES MINIMUM AND 0.638 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 63.0 MICROINCHES GRIP 16.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF