My Quote Request
5305-00-619-4857
20 Products
2-56NC2X3-16
SCREW,MACHINE
NSN, MFG P/N
5305006194857
NSN
5305-00-619-4857
MFG
DUCOMMUN METALS CO
Description
DESIGN CONTROL REFERENCE: 2-56NC2X3-16
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 27.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM
HEAD HEIGHT: 0.041 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 18702
MINIMUM TENSILE STRENGTH: 100000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
59714DB
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194860
NSN
5305-00-619-4860
59714DB
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194860
NSN
5305-00-619-4860
MFG
NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/
Description
DESIGN CONTROL REFERENCE: 59714DB
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.094 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.422 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.391 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 0.433 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.228 INCHES MINIMUM AND 0.233 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD: 0.233 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES NOMINAL
HEAD HEIGHT: 0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 92679
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SECOND DIAMETER FROM HEAD: 0.312 INCHES NOMINAL
THE MANUFACTURERS DATA:
THIRD DIAMETER FROM HEAD: 0.223 INCHES MINIMUM AND 0.227 INCHES MAXIMUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.151 INCHES MINIMUM AND 0.158 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
59714DB
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194860
NSN
5305-00-619-4860
59714DB
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194860
NSN
5305-00-619-4860
MFG
NAVISTAR INTL CORP
Description
DESIGN CONTROL REFERENCE: 59714DB
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.094 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER: 0.422 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER: 0.391 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 4
FASTENER LENGTH: 0.433 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.228 INCHES MINIMUM AND 0.233 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD: 0.233 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
HEAD DIAMETER: 0.438 INCHES NOMINAL
HEAD HEIGHT: 0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 92679
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SECOND DIAMETER FROM HEAD: 0.312 INCHES NOMINAL
THE MANUFACTURERS DATA:
THIRD DIAMETER FROM HEAD: 0.223 INCHES MINIMUM AND 0.227 INCHES MAXIMUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.151 INCHES MINIMUM AND 0.158 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFB561
SCREW,LAG
NSN, MFG P/N
5305006194879
NSN
5305-00-619-4879
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 2.500 INCHES NOMINAL
HARDNESS RATING: 60.0 ROCKWELL B MINIMUM OVERALL
HEAD HEIGHT: 0.328 INCHES NOMINAL
HEAD STYLE: C13 SQUARE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A-307,GR A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB561
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 2 STYLE AND B GRADE
NONMACHINE NOMINAL THREAD DIAMETER: 0.500 INCHES
NONMACHINE THREAD STYLE: A11 CONE POINT (TYPE BP)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: ZINC OVERALL
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
FFB561
SCREW,LAG
NSN, MFG P/N
5305006194882
NSN
5305-00-619-4882
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD HEIGHT: 0.328 INCHES NOMINAL
HEAD STYLE: C13 SQUARE
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 310 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 70000 POUNDS PER SQUARE INCH
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFB561
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2 STYLE AND C GRADE
NONMACHINE NOMINAL THREAD DIAMETER: 0.500 INCHES
NONMACHINE THREAD STYLE: A13 GIMLET POINT (TYPE A, AB OR BA)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
7043290P1
THUMBSCREW
NSN, MFG P/N
5305006194885
NSN
5305-00-619-4885
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
DESIGN CONTROL REFERENCE: 7043290P1
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.101 INCHES NOMINAL
FASTENER LENGTH: 1.190 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.146 INCHES NOMINAL
HEAD DIAMETER: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.310 INCHES NOMINAL
HEAD STYLE: C66 KNURLED NO. 1
MANUFACTURERS CODE: 03538
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.089 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7043290P1
THUMBSCREW
NSN, MFG P/N
5305006194885
NSN
5305-00-619-4885
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: 7043290P1
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.101 INCHES NOMINAL
FASTENER LENGTH: 1.190 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.146 INCHES NOMINAL
HEAD DIAMETER: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.310 INCHES NOMINAL
HEAD STYLE: C66 KNURLED NO. 1
MANUFACTURERS CODE: 03538
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.089 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7040716G2
THUMBSCREW
NSN, MFG P/N
5305006194887
NSN
5305-00-619-4887
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
DESIGN CONTROL REFERENCE: 7040716G2
FASTENER LENGTH: 2.440 INCHES NOMINAL
HEAD DIAMETER: 0.880 INCHES NOMINAL
HEAD HEIGHT: 0.560 INCHES NOMINAL
HEAD STYLE: C69 KNURLED NO. 4
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 03538
MATERIAL: STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT LENGTH: 0.180 INCHES NOMINAL
POINT STYLE: F12 CUP
SPECIAL FEATURES: UNDERCUT UNTHREADED PORTION 0.230 IN. DIA 1.700 IN. LONG
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.560 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7040716G2
THUMBSCREW
NSN, MFG P/N
5305006194887
NSN
5305-00-619-4887
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: 7040716G2
FASTENER LENGTH: 2.440 INCHES NOMINAL
HEAD DIAMETER: 0.880 INCHES NOMINAL
HEAD HEIGHT: 0.560 INCHES NOMINAL
HEAD STYLE: C69 KNURLED NO. 4
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.062 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 03538
MATERIAL: STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT LENGTH: 0.180 INCHES NOMINAL
POINT STYLE: F12 CUP
SPECIAL FEATURES: UNDERCUT UNTHREADED PORTION 0.230 IN. DIA 1.700 IN. LONG
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.560 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7010280P5
THUMBSCREW
NSN, MFG P/N
5305006194888
NSN
5305-00-619-4888
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
DESIGN CONTROL REFERENCE: 7010280P5
FASTENER LENGTH: 1.062 INCHES NOMINAL
HEAD DIAMETER: 0.625 INCHES NOMINAL
HEAD HEIGHT: 0.438 INCHES NOMINAL
HEAD STYLE: C69 KNURLED NO. 4
MANUFACTURERS CODE: 03538
MATERIAL: STEEL COMP 303SE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7010280P5
THUMBSCREW
NSN, MFG P/N
5305006194888
NSN
5305-00-619-4888
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: 7010280P5
FASTENER LENGTH: 1.062 INCHES NOMINAL
HEAD DIAMETER: 0.625 INCHES NOMINAL
HEAD HEIGHT: 0.438 INCHES NOMINAL
HEAD STYLE: C69 KNURLED NO. 4
MANUFACTURERS CODE: 03538
MATERIAL: STEEL COMP 303SE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
9010336
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194915
NSN
5305-00-619-4915
9010336
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194915
NSN
5305-00-619-4915
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 1.250 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.875 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.103 INCHES NOMINAL
HEAD DIAMETER: 0.226 INCHES NOMINAL
HEAD HEIGHT: 0.132 INCHES NOMINAL
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A575 ASSN STD ALL MATERIAL RESPONSES OR ASTM A576 ASSN STD ALL MATERIAL RESPONSES OR ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1989361
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194936
NSN
5305-00-619-4936
1989361
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194936
NSN
5305-00-619-4936
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.125 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.812 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 1.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.260 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SECOND DIAMETER FROM HEAD: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
771428
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194936
NSN
5305-00-619-4936
771428
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194936
NSN
5305-00-619-4936
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.125 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.812 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 1.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.260 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SECOND DIAMETER FROM HEAD: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
875814
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194936
NSN
5305-00-619-4936
875814
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006194936
NSN
5305-00-619-4936
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.125 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.812 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 1.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.260 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SECOND DIAMETER FROM HEAD: 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.438 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
934A262P1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006194970
NSN
5305-00-619-4970
MFG
GENERAL ELECTRIC COMPANY DBA GE DIV GE - AVIATION
Description
DESIGN CONTROL REFERENCE: 934A262P1
FASTENER LENGTH: 1.070 INCHES NOMINAL
HEAD DIAMETER: 0.438 INCHES NOMINAL
HEAD HEIGHT: 0.240 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E12 ROUND LONGITUDINAL HOLE
HOLE DIAMETER: 0.600 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 07482
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: ANODIZE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.570 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.220 INCHES NOMINAL
Related Searches:
934A262P1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006194970
NSN
5305-00-619-4970
MFG
GENERAL ELECTRIC CO
Description
DESIGN CONTROL REFERENCE: 934A262P1
FASTENER LENGTH: 1.070 INCHES NOMINAL
HEAD DIAMETER: 0.438 INCHES NOMINAL
HEAD HEIGHT: 0.240 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E12 ROUND LONGITUDINAL HOLE
HOLE DIAMETER: 0.600 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 07482
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: ANODIZE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.570 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.220 INCHES NOMINAL
Related Searches:
934A262P1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006194970
NSN
5305-00-619-4970
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
DESIGN CONTROL REFERENCE: 934A262P1
FASTENER LENGTH: 1.070 INCHES NOMINAL
HEAD DIAMETER: 0.438 INCHES NOMINAL
HEAD HEIGHT: 0.240 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E12 ROUND LONGITUDINAL HOLE
HOLE DIAMETER: 0.600 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 07482
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: ANODIZE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.570 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.220 INCHES NOMINAL
Related Searches:
105693-103
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006194989
NSN
5305-00-619-4989
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.174 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D7 SIX SPLINE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPLINE MAJOR DIAMETER: 0.097 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SPLINE MINOR DIAMETER: 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
SPLINE WIDTH: 0.021 INCHES MINIMUM AND 0.022 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
69906-3-16C
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006194998
NSN
5305-00-619-4998
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
DESIGN CONTROL REFERENCE: 69906-3-16C
FASTENER LENGTH: 1.750 INCHES NOMINAL
HARDNESS RATING: 75.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.313 INCHES NOMINAL
HEAD HEIGHT: 0.190 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 73030
MATERIAL: STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH: 67000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.880 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL