My Quote Request
5305-00-638-1593
20 Products
318148
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381593
NSN
5305-00-638-1593
318148
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381593
NSN
5305-00-638-1593
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.121 INCHES MINIMUM AND 0.131 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
HEAD HEIGHT: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 416 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CLASS 6,TYPE C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM YIELD STRENGTH: 65000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.249 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
B314099-17
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006381468
NSN
5305-00-638-1468
MFG
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
Description
FASTENER LENGTH: 1.750 INCHES NOMINAL
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.875 INCHES NOMINAL
HEAD HEIGHT: 0.625 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.500 INCHES MINIMUM
THREAD QUANTITY PER INCH: 14
THREAD SERIES DESIGNATOR: BA
WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
GB1110-2-1
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
ITT CORPORATION DBA ITT COMMUNICATIONS SYSTEMS
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
GB1110-2-1
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
ITT CORPORATION DBA ITT COMMUNICATIONS SYSTEMS
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
GB1110-2-1
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
GB1110-2-1
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
SCB40820
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
SCB40820
SCREW,MACHINE
NSN, MFG P/N
5305006381568
NSN
5305-00-638-1568
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
A7030771P1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381578
NSN
5305-00-638-1578
A7030771P1
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381578
NSN
5305-00-638-1578
MFG
GENERAL ELECTRIC CO
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.688 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.250 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM
HEAD HEIGHT: 0.203 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.562 INCHES MINIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
7601274
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
7601274
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.188 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.234 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.219 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: GASTM A576 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SECOND DIAMETER FROM HEAD: 0.141 INCHES NOMINAL
SURFACE TREATMENT: CHROMATE ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1109 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
Related Searches:
7601274
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
7601274
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.188 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.234 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.219 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: GASTM A576 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SECOND DIAMETER FROM HEAD: 0.141 INCHES NOMINAL
SURFACE TREATMENT: CHROMATE ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1109 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
Related Searches:
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
MFG
AMERICAN TELEPHONE AND TELEGRAPH CO
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.188 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.234 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.219 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: GASTM A576 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SECOND DIAMETER FROM HEAD: 0.141 INCHES NOMINAL
SURFACE TREATMENT: CHROMATE ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1109 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
Related Searches:
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
MFG
AMERICAN TELEPHONE AND TELEGRAPH CO
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.188 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.234 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.219 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: GASTM A576 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SECOND DIAMETER FROM HEAD: 0.141 INCHES NOMINAL
SURFACE TREATMENT: CHROMATE ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1109 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
Related Searches:
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
MFG
AT AND T CORP
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.188 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.234 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.219 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: GASTM A576 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SECOND DIAMETER FROM HEAD: 0.141 INCHES NOMINAL
SURFACE TREATMENT: CHROMATE ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1109 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
Related Searches:
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
BL716609
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381583
NSN
5305-00-638-1583
MFG
AT AND T CORP
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.188 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.234 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.438 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.219 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.062 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1527 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: GASTM A576 MIL SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SECOND DIAMETER FROM HEAD: 0.141 INCHES NOMINAL
SURFACE TREATMENT: CHROMATE ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.203 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
~1: COMP 1109 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
Related Searches:
1036174
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381590
NSN
5305-00-638-1590
1036174
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381590
NSN
5305-00-638-1590
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.093 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.312 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.079 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HEAD STYLE: C29 BINDING
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
7038-1310
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381590
NSN
5305-00-638-1590
7038-1310
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381590
NSN
5305-00-638-1590
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.093 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.312 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.079 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HEAD STYLE: C29 BINDING
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
31848
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305006381593
NSN
5305-00-638-1593
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.121 INCHES MINIMUM AND 0.131 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
HEAD HEIGHT: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 416 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CLASS 6,TYPE C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM YIELD STRENGTH: 65000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.249 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC