My Quote Request
5305-00-655-6586
20 Products
332-303SS
SETSCREW
NSN, MFG P/N
5305006556586
NSN
5305-00-655-6586
MFG
L-3 COMMUNICATIONS HOLDINGS INC. DBA SPACE AND NAVIGATION DIV SPACE & NAVIGATION
Description
DESIGN CONTROL REFERENCE: 332-303SS
FASTENER LENGTH: 0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 1NZ85
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OVERALL
NOMINAL THREAD DIAMETER: 0.099 INCHES
POINT STYLE: F19 FLAT
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM
Related Searches:
MS35235-27
SCREW,MACHINE
NSN, MFG P/N
5305006556507
NSN
5305-00-655-6507
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35235-27
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: ALUMINUM ALLOY
SCREW SURFACE TREATMENT: ANODIZE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
346773
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556525
NSN
5305-00-655-6525
MFG
WHITE MOTOR CORP
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 74000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 2 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
633949
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556525
NSN
5305-00-655-6525
MFG
AM GENERAL LLC
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 74000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 2 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
FFS85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556525
NSN
5305-00-655-6525
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 74000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 2 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
N23P25014
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556525
NSN
5305-00-655-6525
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 74000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 2 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
N23P25014
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556525
NSN
5305-00-655-6525
MFG
GENERAL ELECTRIC CO
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 74000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 2 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 125.0 MICROINCHES BEARING SURFACE OF HEAD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
51B507-3-10
SCREW,MACHINE
NSN, MFG P/N
5305006556542
NSN
5305-00-655-6542
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV INTEGRATED SYSTEMS SECTOR
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.514 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B507-3-10
SCREW,MACHINE
NSN, MFG P/N
5305006556542
NSN
5305-00-655-6542
MFG
NORTHROP GRUMMAN TECHNICAL SERVICES INC.
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.514 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CTR700-08-10
SCREW,MACHINE
NSN, MFG P/N
5305006556543
NSN
5305-00-655-6543
MFG
TEXTRON FASTENING SYSTEMS DBA DECORAH OPERATIONS TFS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.535 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
TS702-08-10CR
SCREW,MACHINE
NSN, MFG P/N
5305006556543
NSN
5305-00-655-6543
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.535 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS35304-16
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556546
NSN
5305-00-655-6546
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35304-16
FASTENER LENGTH: 2.500 INCHES NOMINAL
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
MS35304-9
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305006556549
NSN
5305-00-655-6549
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35304-9
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
Related Searches:
5305006556556
SCREW,MACHINE
NSN, MFG P/N
5305006556556
NSN
5305-00-655-6556
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-70
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35266-70
SCREW,MACHINE
NSN, MFG P/N
5305006556556
NSN
5305-00-655-6556
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-70
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
N44P16028B6
SCREW,MACHINE
NSN, MFG P/N
5305006556556
NSN
5305-00-655-6556
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-70
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3324332
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006556572
NSN
5305-00-655-6572
MFG
NAVAL SHIP SYSTEMS COMMAND
Description
DESIGN CONTROL REFERENCE: 3324332
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: DISTORTIONS HEAD
MANUFACTURERS CODE: 80064
MATERIAL: STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
N1926-112
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305006556572
NSN
5305-00-655-6572
MFG
PERFECTING COUPLING CO
Description
DESIGN CONTROL REFERENCE: 3324332
FASTENER LENGTH: 0.312 INCHES NOMINAL
HEAD DIAMETER: 0.281 INCHES NOMINAL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: DISTORTIONS HEAD
MANUFACTURERS CODE: 80064
MATERIAL: STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
5305006556573
SCREW,MACHINE
NSN, MFG P/N
5305006556573
NSN
5305-00-655-6573
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-71
FASTENER LENGTH: 2.000 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS35266-71
SCREW,MACHINE
NSN, MFG P/N
5305006556573
NSN
5305-00-655-6573
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35266-71
FASTENER LENGTH: 2.000 INCHES NOMINAL
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF